Computer-Aided Design (CAD) for the Translation of Geometric Data to Numerical Control (NC) Programs for Manufacturing Systems

2000 ◽  
pp. 47-84
Keyword(s):  
Computer Aided Design ◽  
Manufacturing Systems ◽  
Numerical Control ◽  
Geometric Data ◽  
Computer Aided ◽  
Aided Design

scholarly journals Evaluation of the Feasibility of NaCaPO4-Blended Zirconia as a New CAD/CAM Material for Dental Restoration

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3819
Author(s):  
Ting-Hsun Lan ◽  
Yu-Feng Chen ◽  
Yen-Yun Wang ◽  
Mitch M. C. Chou
Keyword(s):  
Computer Aided Design ◽  
Optical Microscope ◽  
Dental Restoration ◽  
Numerical Control ◽  
Test Results ◽  
Cnc Machine ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
Better Than

The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.

The Application of Computer Techniques in the Design and Manufacturing of Timing Scrolls

1993 ◽  
Vol 207 (2) ◽  
pp. 99-108
Author(s):  
L Q Tang ◽  
D N Moreton
Keyword(s):  
Dynamic Characteristic ◽  
Computer Aided Design ◽  
Numerical Control ◽  
Feeding Mechanism ◽  
Control Techniques ◽  
Computer Aided ◽  
Design And Manufacturing ◽  
Manufacturing Techniques ◽  
Aided Design ◽  
Design And Manufacture

The timing scroll is an important feeding mechanism on packaging lines. As packaging line speeds have increased and the shape of containers has become more diverse, the techniques used for the design and manufacture of such timing scrolls have become critical for successful packaging line performance. Since 1980, various techniques have evolved to improve scroll design, manufacture and the associated line performance. In recent years, as CAD (computer aided design), CAM (computer aided manufacture) and CNC (computer numerical control) techniques have evolved, scroll design and manufacturing techniques began to be linked with computer techniques. In this paper, a scroll design and manufacturing package is presented which can be run on a minicomputer, such as a μ-VAX on an IBM PC clone. This scroll package can produce a timing scroll for any type of container with a correct pocket shape and good dynamic characteristic. Tests using carefully chosen containers have been made using this package and the results indicate that the scrolls obtained by this package have the correct pocket shape and good line performance. However, the design of a good pick-up geometry for some container shapes remains a problem.

scholarly journals Development of integrated intelligent computer-aided design system for mechanical power-transmitting mechanism design

2017 ◽  
Vol 9 (7) ◽  
pp. 168781401771038 ◽  
Author(s):  
Isad Saric ◽  
Adil Muminovic ◽  
Mirsad Colic ◽  
Senad Rahimic
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Mechanical Power ◽  
Design System ◽  
Computer Aided ◽  
Aided Design ◽  
Intelligent Computer

This article presents architecture of integrated intelligent computer-aided design system for designing mechanical power-transmitting mechanisms (IICADkmps). The system has been developed in C# program environment with the aim of automatising the design process. This article presents a modern, automated approach to design. Developed kmps modules for calculation of geometrical and design characteristics of mechanical power-transmitting mechanisms are described. Three-dimensional geometrical parameter modelling of mechanical power-transmitting mechanisms was performed in the computer-aided design/computer-aided manufacturing/computer-aided engineering system CATIA V5. The connection between kmps calculation modules and CATIA V5 modelling system was established through initial three-dimensional models – templates. The outputs from the developed IICADkmps system generated final three-dimensional virtual models of mechanical power-transmitting mechanisms. Testing of the developed IICADkmps system was performed on friction, belt, cogged (spur and bevel gears) and chain transmitting mechanisms. Also, connection of the developed IICADkmps system with a device for rapid prototyping and computer numerical control machines was made for the purpose of additional testing and verification of practical use. Physical prototypes of designed characteristic elements of mechanical power-transmitting mechanisms were manufactured. The selected test three-dimensional virtual prototypes, obtained as an output from the developed IICADkmps system, were manufactured on the device for rapid prototyping (three-dimensional colour printer Spectrum Z510) and computer numerical control machines. Finally, at the end of the article, conclusions and suggested possible directions of further research, based on theoretical and practical research results, are presented.

scholarly journals Computer Numerically Controlled Drawing Robot Based on Computer-Aided Design

2021 ◽  
Author(s):  
Antor Mahamudul Hashan ◽  
Abdullah Haidari ◽  
Srishti Saha ◽  
Titas Paul
Keyword(s):  
Open Source ◽  
Computer Aided Design ◽  
Low Cost ◽  
Rapid Development ◽  
Main Idea ◽  
Numerical Control ◽  
Computer Aided ◽  
Complex Circuits ◽  
Open Source Hardware ◽  
Aided Design

Due to the rapid development of technology, the use of numerically controlled machines in the industry is increasing. The main idea behind this paper is computer-aided design (CAD) based low-cost computer numerical control 2D drawing robot that can accurately draw complex circuits, diagrams, logos, etc. The system is created using open-source hardware and software, which makes it available at a low cost. The open-source LibreCAD application has been used for computer-aided design. Geometric data of a CAD model is converted to coordinate points using the python-based F-Engrave application. This system uses the Arduino UNO board as a signal generator of the universal g-code sender without compromising the performance. The proposed drawing robot is designed as a low-cost robot for educational purposes and aims to increase the student's interest in robotics and computer-aided design (CAD) skills to the next level. The drawing robot structure has been developed, and it meets the requirements of low cost with satisfactory experimental results.

Computer-Aided Dynamic Analysis and Simulation of Multibody Manufacturing Systems

2015 ◽  
Vol 764-765 ◽  
pp. 757-761 ◽  
Author(s):  
Yunn Lin Hwang ◽  
Jung Kuang Cheng ◽  
Van Thuan Truong
Keyword(s):  
Dynamic Analysis ◽  
Computer Aided Design ◽  
Manufacturing Systems ◽  
Robot Arm ◽  
Effective Factors ◽  
Driving System ◽  
Computer Aided ◽  
Numerical Tools ◽  
Aided Design ◽  
And Control

This paper presents simulation of multibody manufacturing systems with the support of numerical tools. The dynamic and cybernetic characteristics of driving system are discussed. Simple prototype models of robot arm and machine tool’s driving system are quickly established in Computer Aided Design (CAD) software inwhich the whole specification of material, inertia and so on are involved. The prototypes therefore are simulated in RecurDyn- a Computer Aided Engineering (CAE) software. The models are driven by controllers built in Matlab/Simulink via co-simulation. The results are suitable with theory and able to exploied for expansion of complexly effective factors. The research indicates that dynamic analysis and control could be done via numerical method instead of directly dynamic equation creation for multibody manufacturing systems.

Implementation of Rapid Manufacturing Systems in the Jewellery Industry in Brazil

2011 ◽  
pp. 119-138
Author(s):  
Juan Carlos Campos Rubio ◽  
Eduardo Romeiro Filho
Keyword(s):  
Computer Aided Design ◽  
Manufacturing Systems ◽  
Medium Size ◽  
Manufacturing Processes ◽  
Computer Aided ◽  
Design And Manufacturing ◽  
Cad Cam ◽  
High Production ◽  
Rapid Prototyping And Manufacturing ◽  
Aided Design

This chapter presents the rapid prototyping and manufacturing concepts applied as means to reducing time between jewellery designs and manufacturing process. Different processes on jewellery modelling production are presented. Nowadays, the use of technologies as CAD/CAM - Computer Aided Design and Manufacturing in high production companies are very disseminated. However, the implementation of these resources at the design and manufacturing processes of jewels and fashion accessories, in small and medium size businesses, is still insipient. As reference, is presented the situation observed in small and medium companies located in Minas Gerais, Brazil.

Applied NURBS on the Research of Interactive Curved Hull Computer Aided Design

2013 ◽  
Vol 328 ◽  
pp. 149-153
Author(s):  
Zhi Hui Dong ◽  
Duan Feng Han ◽  
Li Hao Yuan
Keyword(s):  
Real Time ◽  
Computer Aided Design ◽  
Tree Structure ◽  
Parameter Adjustment ◽  
The Real ◽  
Geometric Data ◽  
Computer Aided ◽  
Aided Design

Based on NURBS algorithm, this paper processes and renders curved hull in OpenGL platform, and applies Tree-Structure to manage all the real-time geometric data. And what is more, extend the functions into curved ratio check, the model's parameter adjustment and output etc. At last, results of instances will be given to illuminate the effects.

Sign in / Sign up

Export Citation Format

Share Document