Life cycle assessment of Irish residential buildings and typical building envelope analysis

2013 ◽  
pp. 600-607
Author(s):  
A Armstrong ◽  
J Goggins
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Building Envelope ◽  
Envelope Analysis

scholarly journals Life-Cycle Assessment of Alternative Envelope Construction for a New House in South-Western Europe: Embodied and Operational Magnitude

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4145
Author(s):  
Helena Monteiro ◽  
Fausto Freire ◽  
John E. Fernández
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Western Europe ◽  
Residential Buildings ◽  
Building Envelope ◽  
Design Stage ◽  
Insulation Material ◽  
Operational Energy ◽  
Insulation Thickness ◽  
Western European

The building envelope is critical to reducing operational energy in residential buildings. Under moderate climates, as in South-Western Europe (Portugal), thermal operational energy may be substantially reduced with an adequate building envelope selection at the design stage; therefore, it is crucial to assess the trade-offs between operational and embodied impacts. In this work, the environmental influence of building envelope construction with varying thermal performance were assessed for a South-Western European house under two operational patterns using life-cycle assessment (LCA) methodology. Five insulation thickness levels (0–12 cm), four total ventilation levels (0.3–1.2 ac/h), three exterior wall alternatives (double brick, concrete, and wood walls), and six insulation materials were studied. Insulation thickness tipping-points were identified for alternative operational patterns and wall envelopes, considering six environmental impact categories. Life-cycle results show that, under a South-Western European climate, the embodied impacts represent twice the operational impact of a new Portuguese house. Insulation played an important role. However, increasing it beyond the tipping-point is counterproductive. Lowering ventilation levels and adopting wood walls reduced the house life-cycle impacts. Cork was the insulation material with the lowest impact. Thus, under a moderate climate, priority should be given to using LCA to select envelope solutions.

scholarly journals Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

2021 ◽  
Vol 11 (9) ◽  
pp. 3820
Author(s):  
Noelia Llantoy ◽  
Gabriel Zsembinszki ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Residential Buildings ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Innovative System ◽  
The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

scholarly journals Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

2021 ◽  
Vol 13 (9) ◽  
pp. 5322
Author(s):  
Gabriel Zsembinszki ◽  
Noelia Llantoy ◽  
Valeria Palomba ◽  
Andrea Frazzica ◽  
Mattia Dallapiccola ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Hot Water ◽  
Electrical Consumption ◽  
The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

scholarly journals LIFE CYCLE ASSESSMENT OF TECHNICAL BUILDING SERVICES OF LARGE RESIDENTIAL BUILDING STOCKS USING SEMANTIC 3D CITY MODELS

2020 ◽  
Vol VI-4/W1-2020 ◽  
pp. 85-92
Author(s):  
H. Harter ◽  
B. Willenborg ◽  
W. Lang ◽  
T. H. Kolbe
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Stock ◽  
3D City Models ◽  
Methodical Approach ◽  
Operational Energy ◽  
City Models

Abstract. Reducing the demand for non-renewable resources and the resulting environmental impact is an objective of sustainable development, to which buildings contribute significantly. In order to realize the goal of reaching a climate-neutral building stock, it must first be analyzed and evaluated in order to develop optimization strategies. The life cycle based consideration and assessment of buildings plays a key role in this process. Approaches and tools already exist for this purpose, but they mainly take the operational energy demand of buildings and not a life cycle based approach into account, especially when assessing technical building services (TBS). Therefore, this paper presents and applies a methodical approach for the life cycle based assessment of the TBS of large residential building stocks, based on semantic 3D city models (CityGML). The methodical approach developed for this purpose describes the procedure for calculating the operational energy demand (already validated) and the heating load of the building, the dimensioning of the TBS components and the calculation of the life cycle assessment. The application of the methodology is illustrated in a case study with over 115,000 residential buildings from Munich, Germany. The study shows that the methodology calculates reliable results and that a significant reduction of the life cycle based energy demand can be achieved by refurbishment measures/scenarios. Nevertheless, the goal of achieving a climate-neutral building stock is a challenge from a life cycle perspective.

Life Cycle Assessment of a Reflective Foil Material and Comparison With Other Solutions for Thermal Insulation of Buildings

2011 ◽  
Author(s):  
U. Desideri ◽  
S. Proietti ◽  
F. Zepparelli ◽  
P. Sdringola ◽  
E. Cenci
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Thermal Insulation ◽  
Energy Savings ◽  
Planning Process ◽  
Raw Materials ◽  
Building Envelope ◽  
Life Cycle Assessment Methodology ◽  
Production Phase ◽  
Reflective Foil

In the last twenty years, the exploitation of non-renewable resources and the effects of their applications on environment and human health were considered central topics in political and scientific debate on European and worldwide scale. This kind of resources have been used in different sectors, as energy systems, technological research, but also in private/public buildings and production of consumer goods, involving significantly domestic and ordinary life of every human being. Studies about the effect of this exploitation carried out discouraging results, in terms of climate changes and energy sustenance; this determined a progressive approach process to a new concept of development, able to couple the qualitative standard of modern life with the respect of planet and its inhabitants. Starting from this reflection, scientific community moved towards research on alternative resources and developed a new way to conceive planning process and technical innovations, in order to exploit renewable energies and recycled materials, promote energy savings and reduce environmental pollution. In this context the present paper aims at evaluating benefits relating to different solutions of thermal insulation in building envelope. In fact a high grade of insulation ensures better comfort conditions in inner spaces, reducing energy consumptions due to heating and cooling conditioning. The paper presents the results of a detailed Life Cycle Assessment (LCA) of the reflective foil ISOLIVING, conceived and produced by an Italian company. The Life Cycle Assessment methodology allows to consider all stages of the life cycle, from the extraction of raw materials to the product’s disposal, in an optics “from cradle to grave.” In particular, the study takes into account the production phase of the reflective foil ISOLIVING, the installation phase, the transport of all components to the production site and also the end of life scenario of the material. The possibility to collect many detailed information about the production phase adds value to the study. The analysis is carried out according to UNI EN ISO 14040 and UNI EN ISO 14044, which regulate the LCA procedure. The LCA modeling was performed using SimaPro software application. The results of the analysis allow to make an important comparison concerning the environmental performances, between the reflective foil ISOLIVING and other types of insulating materials.

scholarly journals Comparative Life Cycle Assessment of Steel and Concrete Construction Frames: A Case Study of Two Residential Buildings in Iran

Buildings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 54
Author(s):  
Amir Oladazimi ◽  
Saeed Mansour ◽  
Seyed Abbas Hosseinijou
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Residential Buildings ◽  
Steel Frame ◽  
Complete Analysis ◽  
Environmental Damage ◽  
Concrete Frame

Given the fact that during the recent years the majority of buildings in Iran have been constructed either on steel or concrete frames, it is essential to investigate the environmental impacts of materials used in such constructions. For this purpose, two multi-story residential buildings in Tehran with a similar function have been considered in this study. One building was constructed with a steel frame and the other was constructed with a concrete frame. Using the life cycle assessment tool, a complete analysis of all the stages of a building’s life cycle from raw material acquisition to demolition and recycling of wastes was carried out. In this research, the environmental impacts included global warming potential in 100 years, acidification, eutrophication potential, human toxicity (cancer and non-cancer effects), resource depletion (water and mineral), climate change, fossil fuel consumption, air acidification and biotoxicity. It could be concluded from the results that the total pollution of the concrete frame in all eleven aforementioned impact factors was almost 219,000 tonnes higher than that of the steel frame. Moreover, based on the results, the concrete frame had poorer performance in all but one impact factor. With respect to global warming potential, the findings indicated there were two types of organic and non-organic gases that had an impact on global warming. Among non-organic emissions, CO2 had the biggest contribution to global warming potential, while among organic emissions, methane was the top contributor. These findings suggest the use of steel frames in the building industry in Iran to prevent further environmental damage; however, in the future, more research studies in this area are needed to completely investigate all aspects of decision on the choice of building frames, including economic and social aspects.

Sign in / Sign up

Export Citation Format

Share Document