scholarly journals Influencing Factors Analysis of Gas Occurrence in Xingshan Coal Mine No. 27 Coal Seam

2015 ◽  
Vol 03 (01) ◽  
pp. 1-6
Author(s):  
远声 王
Keyword(s):  
Coal Seam ◽  
Influencing Factors ◽  
Coal Mine ◽  
Factors Analysis ◽  
Gas Occurrence

scholarly journals Investigation on coal seam distribution and gas occurrence law in Guizhou, China

2018 ◽  
Vol 36 (5) ◽  
pp. 1310-1334 ◽  
Author(s):  
Qingsong Li ◽  
Xin He ◽  
Jiahao Wu ◽  
Shu Ma
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Sedimentary Environment ◽  
Influence Factors ◽  
Preventive Treatment ◽  
Geological Structure ◽  
Mine Safety ◽  
Gas Content ◽  
Gas Occurrence ◽  
Safety Production

In order to enhance the management level of coal mine safety production and promote the “safe, accurate and efficient” preventive treatments for gas in Guizhou of China, the occurrence and other prominent features of coal and gas are investigated. The characteristics and regularities of coal mine accidents in Guizhou during 2001–2015 are summarized to analyze the commonness of gas accidents in general and determine the characteristics of gas preventive treatment. Geological data, gas basic parameters, and physical properties of coal of 386 mines and 761 sets of coal seams in Guizhou are also statistically analyzed. Based on step control theory of gas occurrence structure and the regionally tectonic regularity of coal-bearing stratum distribution, the deformations of coal measures in Guizhou mine area are mainly caused by great variation of stratigraphic occurrence, complicated geological structure, and high crustal stress. The regional occurrence of coal seam is obvious with the highest content of Tongzi–Zunyi–Liuzhi–Xingyi line, which gradually reduces to the both east and west sides. Influence factors and weights of gas occurrence are expounded from geological and coal factor by mathematical statistics, and the main influence factors of gas occurrence are the sedimentary environment, syncline structure, and metamorphic grade in proper sequence. Combined with the risk prediction of coal and gas outburst area, the prediction of gas pressure by gas content is not suitable under the special occurrence conditions. The initial velocity of gas emission, the solidity coefficient, and the damage type in more than 77% of minable seams all exceed the critical value. This work provides guidance in improvement of the governance situation for gas control in Guizhou. The index prediction system which is suitable for mining conditions of special coal mines in Guizhou should be established.

scholarly journals A research on the influence of geological factors to gas discharge from No.8 un-mined solid coal seam of Baode Coal Mine

2021 ◽  
Vol 284 ◽  
pp. 01016
Author(s):  
Yinghua Lv ◽  
Shi Gang An ◽  
Wen Xu Liang ◽  
Dian Fu Chen ◽  
Wei Fu
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Research Result ◽  
Geological Structure ◽  
Relational Model ◽  
Gas Content ◽  
Solid Coal ◽  
Gas Occurrence ◽  
Geological Factors ◽  
Grey Relational

Mining is gradually progressed toward the in-depth area of No.8 solid coal seam in No.3 panel of Baode Coal Mine. In order to secure safe mining in this area, a systematic analysis is conducted on the geological factors that influence gas occurrence. Based on the basic data actually measured at site, grey relational analysis (GRA) is adopted for predictive analysis of influencing factors (depth, coal seam thickness, metamorphic grade, sand to mud ratio of roof, sand to mud ratio of floor, geological structure and washout), followed by establishment of a grey relational model. Then, the relation degree among factors is calculated, thus identifying the main controlling factors of gas occurrence. The research result suggests: the main geological factors that influence gas occurrence in No.8 coal seam are geological structure and washout. A model equation is established for prediction of gas content using multiple regression method: y=3.2429+0.0047X1+0.0079X2-0.0180X3+0.0016X4-0.0215X5+0.4641X6+0.2001X7. This equation demonstrates high degree of fitting.

Assessment of risk tendency of coal bursting pressure in deep outburst seam based on fuzzy evaluation method

2021 ◽  
pp. 1-9
Author(s):  
Beifang Gu ◽  
Minbo Zhang
Keyword(s):  
Coal Seam ◽  
Influencing Factors ◽  
Hierarchical Structure ◽  
Coal Mine ◽  
Bursting Pressure ◽  
Strong Impact ◽  
Structure Model ◽  
Working Face ◽  
The Hierarchical Structure ◽  
Impact Risk

In order to analysis the mechanism of coal bursting pressures of deep coal seams, and take effective methods to identify, monitor and control coal bursting pressure, this study takes 21101 working face of No. 2 Coal seam in Dongpang Coal Mine as an example, risk identification was carried out for the harmful factors of coal bursting pressure in coal seam 21101 in Dongpang Coal Mine, and each influencing factor was classified. The hierarchical structure model of the influencing factors of coal bursting pressure in coal seam protruding deep in Dongpang Coal Mine was established in combination with expert opinions, and the weight of each level index was calculated by MATLAB software. The results show that the 21101 working face of No. 2 coal seam in Dongpang Coal Mine has strong impact risk, and the main risk factors include geological structure, impact resistance of coal and rock, mining stress, inducing factors, emphasis degree of impact risk. According to the hierarchical structure model of the influencing factors, the corresponding safety measures are put forward to prevent the damage caused by coal bursting pressure in advance and ensure the high quality and safe production in the mine. The qualitative and quantitative methods are used to make the evaluation process more reasonable and scientific.

Phosphorus minerals in tonstein; coal seam 405 at Sośnica-Makoszowy coal mine, Upper Silesia, southern Poland

2013 ◽  
Vol 63 (2) ◽  
pp. 271-281 ◽  
Author(s):  
Magdalena Kokowska-Pawłowska ◽  
Jacek Nowak
Keyword(s):  
Trace Elements ◽  
Coal Seam ◽  
Mineral Composition ◽  
Coal Mine ◽  
Chemical Compositions ◽  
Coal Basin ◽  
Upper Silesia ◽  
Southern Poland ◽  
Basin Area

Abstract Kokowska-Pawłowska, M. and Nowak, J. 2013. Phosphorus minerals in tonstein; coal seam 405 at Sośnica- Makoszowy coal mine, Upper Silesia, southern Poland. Acta Geologica Polonica, 63 (2), 271-281. Warszawa. The paper presents results of research on tonstein, which constitutes an interburden in coal seam 405 at the Sośnica- Makoszowy coal mine, Makoszowy field (mining level 600 m), Upper Silesia, southern Poland. The mineral and chemical compositions of the tonstein differ from the typical compositions described earlier for tonsteins from Upper Silesia Coal Basin area. Additionally, minerals present in the tonsteins include kaolinite, quartz, kaolinitised biotite and feldspars. The presence of the phosphatic minerals apatite and goyazite has been recognized. The presence of gorceixite and crandallite is also possible. The contents of CaO (5.66 wt%) and P2O5 (6.2 wt%) are remarkably high. Analysis of selected trace elements demonstrated high contents of Sr (4937 ppm) and Ba (4300 ppm), related to the phosphatic minerals. On the basis of mineral composition the tonstein has been identified as a crystalline tonstein, transitional to a multiplied one.

Reasonable Entry Layout of Lower Seam in Multi-Seam Mining Based on Numerical Simulation

2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Coal Seam ◽  
Coal Mine ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Geological Conditions ◽  
Seam Mining

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.

Sign in / Sign up

Export Citation Format

Share Document