Effect of Weft Knitted Polyester Fabric Structure on its Hydrophobicity after Fluorocarbon Finishing

2015 ◽  
Vol 4 (1) ◽  
pp. 27-34
Author(s):  
Sanaz Ghapanvari ◽  
Akbar Khoddami ◽  
Hossein Hasani
Keyword(s):  
Polyester Fabric ◽  
Fabric Structure

scholarly journals The Elastic Share of Inelastic Stress–Strain Paths of Woven Fabrics

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4243
Author(s):  
Mehran Motevalli ◽  
Jörg Uhlemann ◽  
Natalie Stranghöner ◽  
Daniel Balzani
Keyword(s):  
Polyester Fabric ◽  
Load Cycle ◽  
Woven Fabrics ◽  
Stress Strain ◽  
Fabric Structure ◽  
Biaxial Tests ◽  
Considerable Impact ◽  
Strain Paths ◽  
Woven Glass Fiber ◽  
The Ideal

Manifold variations of the mechanical behavior of structural woven fabrics appear in the first load cycles. Nevertheless, invariable states, i.e., mechanically saturated states, can be approached by multiple monotonous load cycle biaxial tests. In a state acceptably close to the ideal saturated state, the stress–strain paths reveal the elastic share of the initially inelastic stress–strain paths of woven fabrics. In this paper, the mechanical saturation behavior of two types of PTFE-coated woven glass fiber fabrics is examined and compared to the recently reported saturation behavior of a PVC-coated polyester fabric. With the help of the saturation test data, an extrapolation function is developed that facilitates an estimation of late cycle stiffness behavior based on measured early cycle behavior. Furthermore, the considerable impact of late cycle properties on structural analyses is shown exemplarily in the numerical simulation of a prestressed fabric structure by comparing results achieved from late and early load cycle stiffness parameters.

A novel green continuous dyeing of polyester fabric with excellent color data

2020 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Reda M El-Shishtawy ◽  
Nahed Ahmed ◽  
Sahar Nassar ◽  
Fayza kantouch
Keyword(s):  
Polyester Fabric ◽  
Color Data ◽  
Excellent Color

Carbon footprint and water footprint assessment of virgin and recycled polyester textiles

2021 ◽  
pp. 004051752110062
Author(s):  
Weiran Qian ◽  
Xiang Ji ◽  
Pinghua Xu ◽  
Laili Wang
Keyword(s):  
Production Process ◽  
Environmental Impacts ◽  
Carbon Footprint ◽  
Water Scarcity ◽  
Water Footprint ◽  
Oxygen Demand ◽  
Polyester Fabric ◽  
Total Carbon ◽  
Fabric Production ◽  
Water Eutrophication

Recycled polyester textile fibers stemming from waste polyester material have been applied in the textile industry in recent years. However, there are few studies focusing on the evaluation and comparison of the environmental impacts caused by the production of virgin polyester textiles and recycled polyester textiles. In this study, the carbon footprint and water footprint of virgin polyester textiles and recycled polyester textiles were calculated and compared. The results showed that the carbon footprint of the virgin polyester textiles production was 119.59 kgCO2/100 kg. Terephthalic acid production process occupied the largest proportion, accounting for 45.83%, followed by polyester fabric production process, ethylene production process, paraxylene production process, ethylene glycol production process and polyester fiber production process. The total carbon footprint of waste polyester recycling was 1154.15 kgCO2/100 kg, approximately ten times that of virgin polyester textiles production. As for the water footprint, it showed that virgin polyester fabric production and recycled polyester fabric production both had great impact on water eutrophication and water scarcity. Chemical oxygen demand caused the largest water eutrophication footprint, followed by ammonia-nitrogen and five-day biochemical oxygen demand. The water scarcity footprint of virgin polyester fabric production and recycled polyester fabric production was 5.98 m3 H2Oeq/100 kg and 1.90 m3 H2Oeq/100 kg, respectively. The comprehensive evaluation of carbon footprint and water footprint with the life cycle assessment polygon method indicated that the polyester fabric production process exhibited greater environmental impacts both for virgin polyester and recycled polyester.

scholarly journals In situ grown palladium nanoparticles on polyester fabric as easy-separable and recyclable catalyst for Suzuki-Miyaura reaction

2021 ◽  
pp. 106328
Author(s):  
Tiefeng Xu ◽  
Panting Lu ◽  
Sebastian Wohlrab ◽  
Wenxing Chen ◽  
Armin Springer ◽  
...  
Keyword(s):  
Palladium Nanoparticles ◽  
Polyester Fabric ◽  
Recyclable Catalyst

scholarly journals Self-Cleaning Polyester Fabric Prepared with TiOF2 and Hexadecyltrimethoxysilane

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 387
Author(s):  
Euigyung Jeong ◽  
Heeju Woo ◽  
Yejin Moon ◽  
Dong Yun Lee ◽  
Minjung Jung ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Angle ◽  
Treatment Method ◽  
Polyester Fabric ◽  
Anatase Tio2 ◽  
The Self ◽  
Water Contact ◽  
Direct Fluorination ◽  
Tomato Ketchup ◽  
Self Cleaning

In this study, self-cleaning polyester (PET) fabrics were prepared using TiOF2 and hexadecyltrimethoxysilane(HDS) treatment. TiOF2 was synthesized via direct fluorination of a precursor TiO2 at various reaction temperatures. The prepared PET fabrics had superior photocatalytic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics under UV and sunlight with 98% decomposition of methylene blue. TiOF2/HDS-treated PET fabrics also had superior superhydrophobic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics with a 161° water contact angle and 6° roll-off angle. After the self-cleaning tests of the non-dyed TiOF2/HDS-treated PET fabrics, we prepared dyed TiOF2/HDS-treated PET fabrics to test practical aspects of the treatment method. These PET fabrics were barely stained by tomato ketchup; even when stained, they could be self-cleaned within 4 h. These results suggest that practical self-cleaning PET fabrics with superhydrophobicity and photocatalytic degradation could be prepared using TiOF2/HDS-treatment.

Determination of a Rubber-Like Material Model as an Inverse Problem

2011 ◽  
Vol 70 ◽  
pp. 225-230 ◽  
Author(s):  
Agnieszka Derewonko ◽  
Andrzej Kiczko
Keyword(s):  
Selection Process ◽  
Axial Stress ◽  
Constitutive Models ◽  
Material Model ◽  
Polyester Fabric ◽  
Point Of View ◽  
Air Cushion ◽  
Ill Conditioning ◽  
Stress States

The purpose of this paper is to describe the selection process of a rubber-like material model useful for simulation behaviour of an inflatable air cushion under multi-axial stress states. The air cushion is a part of a single segment of a pontoon bridge. The air cushion is constructed of a polyester fabric reinforced membrane such as Hypalon®. From a numerical point of view such a composite type poses a challenge since numerical ill-conditioning can occur due to stiffness differences between rubber and fabric. Due to the analysis of the large deformation dynamic response of the structure, the LS-Dyna code is used. Since LS-Dyna contains more than two-hundred constitutive models the inverse method is used to determine parameters characterizing the material on the base of results of the experimental test.

Sign in / Sign up

Export Citation Format

Share Document