Mechanical Evaluation of Nano Hydroxyapatite, Chitosan and Collagen Composite Coating Compared with Nano Hydroxyapatite Coating on Commercially Pure Titanium Dental Implants

2017 ◽  
Vol 28 (2) ◽  
pp. 42-48
Author(s):  
Sabreen W. Ibrahim ◽  
Widad A. Al-Nakkash
Keyword(s):  
Dental Implants ◽  
Composite Coating ◽  
Pure Titanium ◽  
Hydroxyapatite Coating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Titanium Dental Implants

Possibilities of biocompatible material production using conform SPD technology

2017 ◽  
Vol 1 (88) ◽  
pp. 5-11 ◽  
Author(s):  
J. Palán ◽  
L. Maleček ◽  
J. Hodek ◽  
M. Zemko ◽  
J. Dzugan
Keyword(s):  
Mechanical Properties ◽  
Dental Implants ◽  
Nanostructured Materials ◽  
Continuous Production ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Ultrafine Grained ◽  
Materials Research ◽  
Titanium Grade

Purpose: At present, materials research in the area of SPD (severe plastic deformation) processes is very intensive. Materials processed by these techniques show better mechanical properties and have finer grain when compared to the input feedstock. The refined microstructure may be ultrafine-grained or nanostructured, where the grain size becomes less than 100 nm. One of the materials used for such processes is CP (commercially pure) titanium of various grades, which is widely used for manufacturing dental implants. The article deals with one of the technologies available for the production of ultrafine-grained titanium: Conform technology. CP titanium processed by CONFORM technology exhibits improved mechanical properties and very favourable biocompatibility, due to its fine-grained structure. The article presents the current experience in the production of ultrafine CP titanium using this technology. The main objective of this article is describing the behaviour of CP titanium during forming in the Conform device and its subsequent use in dental implantology. Design/methodology/approach: In the present study, commercially pure Grade 2 titanium was processed using the CONFORM machine. The numerical simulation of the process was done using FEM method with DEFORMTM software. The evaluation was performed by simple tensile testing and transmission electron microscopy. The first conclusions were derived from the determined mechanical properties and based on analogies in available publications on a similar topic. Findings: This study confirmed that the SPD process improves mechanical properties and does not impair the ductility of the material. The CONFORM process enables the continuous production of ultrafine-grained or nanostructured materials. Research limitations/implications: At the present work, the results show the possible way of continuous production of ultrafine-grained or nanostructured materials. Nevertheless, the further optimization is needed in order to improve the final quality of wires and stabilize the process. As these factors will be solved, the technology will be ready for the industry. Practical implications: The article gives the practical information about the continuous production of ultrafine-grained pure titanium Grade 2 and the possibility of use this material for dental implants. Originality/value: The present paper gives information about the influence of the CONFORM technology on final mechanical and structural properties with the emphasis on technological aspects

scholarly journals Titanium Alloys for Dental Implants: A Review

Prosthesis ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 100-116 ◽  
Author(s):  
John W. Nicholson
Keyword(s):  
Titanium Alloys ◽  
Dental Implants ◽  
Clinical Success ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
Foreseeable Future ◽  
Success Rates ◽  
Commercially Pure

The topic of titanium alloys for dental implants has been reviewed. The basis of the review was a search using PubMed, with the large number of references identified being reduced to a manageable number by concentrating on more recent articles and reports of biocompatibility and of implant durability. Implants made mainly from titanium have been used for the fabrication of dental implants since around 1981. The main alloys are so-called commercially pure titanium (cpTi) and Ti-6Al-4V, both of which give clinical success rates of up to 99% at 10 years. Both alloys are biocompatible in contact with bone and the gingival tissues, and are capable of undergoing osseointegration. Investigations of novel titanium alloys developed for orthopaedics show that they offer few advantages as dental implants. The main findings of this review are that the alloys cpTi and Ti-6Al-4V are highly satisfactory materials, and that there is little scope for improvement as far as dentistry is concerned. The conclusion is that these materials will continue to be used for dental implants well into the foreseeable future.

Sign in / Sign up

Export Citation Format

Share Document