Managing Uncertain Capacities for Network Revenue Optimization

Author(s):  
Fabricio Previgliano ◽  
Gustavo Vulcano

Problem definition: We study the problem of managing uncertain capacities for revenue optimization over a network of resources. The uncertainty could be due to (i) the need to reallocate initial capacities among resources or (ii) the random availability of physical capacities by the time of service execution. Academic/practical relevance: The analyzed control policy is aligned with the current industry practice, with a virtual capacity and a bid price associated with each network resource. The seller collects revenues from an arriving stream of customers. Admitted requests that cannot be accommodated within the final, effective capacities incur a penalty cost. The objective is to maximize the total cumulative net revenue (sales revenue minus penalty cost). The problem arises in practice, for instance, when airlines are subject to last-minute change of aircrafts and in cargo revenue management where the capacity left by the passengers’ load is used for freight. Methodology: We present a stochastic dynamic programming formulation for this problem and propose a stochastic gradient algorithm to approximately solve it. All limit points of our algorithm are stationary points of the approximate expected net revenue function. Results: Through an exhaustive numerical study, we show that our controls are computed efficiently and deliver revenues that are almost consistently higher than the ones obtained from benchmarks based on the widely adopted deterministic linear programming model. Managerial implications: We obtain managerial insights about the impact of the timing of the capacity uncertainty clearance, the capacity heterogeneity, the network congestion, and the penalty for not being able to accommodate the previously accepted demand. Our approach tends to offer the best performance across different parameterizations of the problem.

1992 ◽  
Vol 14 (1) ◽  
pp. 9 ◽  
Author(s):  
JGI Passmore ◽  
CG Brown

Small property size is often cited as one of the major causes of rangeland degradation in Australia. However, there is some conjecture as to the importance of this effect and the process by which small property sizes lead to rangeland degradation. Relatively little empirical analysis of these issues has been undertaken, especially in a dynamic context which is all important in the case of rangeland degradation. Regression and dynamic programming techniques are employed in this study to investigate and measure the impact of property sizes on the use and state of one of Australia's most important rangelands, the Queensland mulga rangeland. Regression analysis of cross sectional data reveals significant correlations between property size, stocking rate and degradation. These correlations are confirmed in a normative stochastic dynamic programming model which demonstrates that it is economically optimal for graziers managing smaller properties to adopt higher stocking rates. For these graziers, the longterm costs of land degradation are exceeded by short-term financial benefits of heavier stocking. Thus government policy aimed at arresting the serious degradation occurring in the mulga rangelands should focus on measures to facilitate property build-up..


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Peixin Zhao ◽  
Fanfan Liu ◽  
Yuanyuan Guo ◽  
Xiaoyang Duan ◽  
Yunshu Zhang

With the growing interest in environmental protection and congestion, electric vehicles are increasingly becoming the important transportation means. However, electric vehicles currently face several adoption barriers including high purchasing price and limited travelling range, so the fleets where electric vehicles and conventional vehicles coexist are closer to the current fleet management status. Considering the impact of charging facilities and carbon emission, this paper proposes a vehicle routing problem with a mixed fleet of conventional and electric vehicles and soft time windows. A bi-objective programming model is established to minimize total operational cost and time penalty cost. Finally, the nondominated sorting genetic algorithm II (NSGA-II) is employed to deal with this problem. Furthermore, single-objective optimization is carried out for the two objectives, respectively, and the linear weighting method is also used to solve the problem. Through the contrast of these results and the NSGA-II results, the effectiveness of the algorithm in this paper is further verified. The results indicate that two objectives are contradictory to some extent and decision-makers need a trade-off between two objectives.


2021 ◽  
pp. 174425912098418
Author(s):  
Toivo Säwén ◽  
Martina Stockhaus ◽  
Carl-Eric Hagentoft ◽  
Nora Schjøth Bunkholt ◽  
Paula Wahlgren

Timber roof constructions are commonly ventilated through an air cavity beneath the roof sheathing in order to remove heat and moisture from the construction. The driving forces for this ventilation are wind pressure and thermal buoyancy. The wind driven ventilation has been studied extensively, while models for predicting buoyant flow are less developed. In the present study, a novel analytical model is presented to predict the air flow caused by thermal buoyancy in a ventilated roof construction. The model provides means to calculate the cavity Rayleigh number for the roof construction, which is then correlated with the air flow rate. The model predictions are compared to the results of an experimental and a numerical study examining the effect of different cavity designs and inclinations on the air flow rate in a ventilated roof subjected to varying heat loads. Over 80 different test set-ups, the analytical model was found to replicate both experimental and numerical results within an acceptable margin. The effect of an increased total roof height, air cavity height and solar heat load for a given construction is an increased air flow rate through the air cavity. On average, the analytical model predicts a 3% higher air flow rate than found in the numerical study, and a 20% lower air flow rate than found in the experimental study, for comparable test set-ups. The model provided can be used to predict the air flow rate in cavities of varying design, and to quantify the impact of suggested roof design changes. The result can be used as a basis for estimating the moisture safety of a roof construction.


Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1425
Author(s):  
Tarek Bouzennada ◽  
Farid Mechighel ◽  
Kaouther Ghachem ◽  
Lioua Kolsi

A 2D-symmetric numerical study of a new design of Nano-Enhanced Phase change material (NEPCM)-filled enclosure is presented in this paper. The enclosure is equipped with an inner tube allowing the circulation of the heat transfer fluid (HTF); n-Octadecane is chosen as phase change material (PCM). Comsol-Multiphysics commercial code was used to solve the governing equations. This study has been performed to examine the heat distribution and melting rate under the influence of the inner-tube position and the concentration of the nanoparticles dispersed in the PCM. The inner tube was located at three different vertical positions and the nanoparticle concentration was varied from 0 to 0.06. The results revealed that both heat transfer/melting rates are improved when the inner tube is located at the bottom region of the enclosure and by increasing the concentration of the nanoparticles. The addition of the nanoparticles enhances the heat transfer due to the considerable increase in conductivity. On the other hand, by placing the tube in the bottom area of the enclosure, the liquid PCM gets a wider space, allowing the intensification of the natural convection.


2021 ◽  
pp. 1-29
Author(s):  
Yanhong Chen

ABSTRACT In this paper, we study the optimal reinsurance contracts that minimize the convex combination of the Conditional Value-at-Risk (CVaR) of the insurer’s loss and the reinsurer’s loss over the class of ceded loss functions such that the retained loss function is increasing and the ceded loss function satisfies Vajda condition. Among a general class of reinsurance premium principles that satisfy the properties of risk loading and convex order preserving, the optimal solutions are obtained. Our results show that the optimal ceded loss functions are in the form of five interconnected segments for general reinsurance premium principles, and they can be further simplified to four interconnected segments if more properties are added to reinsurance premium principles. Finally, we derive optimal parameters for the expected value premium principle and give a numerical study to analyze the impact of the weighting factor on the optimal reinsurance.


2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110094
Author(s):  
Ibrahim Elnasri ◽  
Han Zhao

In this study, we numerically investigate the impact perforation of sandwich panels made of 0.8 mm 2024-T3 aluminum alloy skin sheets and graded polymeric hollow sphere cores with four different gradient profiles. A suitable numerical model was conducted using the LS-DYNA code, calibrated with an inverse perforation test, instrumented with a Hopkinson bar, and validated using experimental data from the literature. Moreover, the effects of quasi-static loading, landing rates, and boundary conditions on the perforation resistance of the studied graded core sandwich panels were discussed. The simulation results showed that the piercing force–displacement response of the graded core sandwich panels is affected by the core density gradient profiles. Besides, the energy absorption capability can be effectively enhanced by modifying the arrangement of the core layers with unclumping boundary conditions in the graded core sandwich panel, which is rather too hard to achieve with clumping boundary conditions.


Author(s):  
Alessio Trivella ◽  
Selvaprabu Nadarajah ◽  
Stein-Erik Fleten ◽  
Denis Mazieres ◽  
David Pisinger

Problem definition: Merchant commodity and energy production assets operate in markets with volatile prices and exchange rates. Plant closures adversely affect societal entities beyond the specific plant being shut down, such as the parent company and the local community. Motivated by an aluminum producer, we study if mitigating these hard-to-assess broader impacts of a shutdown is financially viable using the plant’s operating flexibility. Academic/practical relevance: Our social commerce perspective toward managing shutdown decisions deviates from the commonly used asset value maximization objective in merchant operations. Identifying operating policies that delay or decrease the likelihood of a shutdown without incurring a significant asset value loss supports socially responsible plant shutdown decisions. Methodology: We formulate a constrained Markov decision process to manage shutdown decisions and limit the probability of future plant closures. We provide theoretical support for approximating this intractable model using unconstrained stochastic dynamic programs with modified shutdown costs and explore two classes of operating policies. Our first policy leverages anticipated regret theory, and the second policy generalizes, using machine learning, production-margin heuristics used in practice. We compute the former and latter policies using a least squares Monte Carlo method and combining this method with binary classification, respectively. Results: Anticipated-regret policies possess desirable asymptotic properties absent in classification-based policies. On instances created using real data, anticipated-regret and classification-based policies outperform practice-based production-margin strategies. Significant reductions in shutdown probability and delays in plant closures are possible while incurring small asset value losses. Managerial implications: A plant’s operating flexibility provides an effective lever to balance the social objective to reduce closures and the financial goal to maximize asset value. Adhering to both objectives requires combining short-term commitments with external stakeholders to avoid shutdown with longer-term internal efforts to reduce the probability of plant closures.


2021 ◽  
Vol 11 (5) ◽  
pp. 2175
Author(s):  
Oscar Danilo Montoya ◽  
Walter Gil-González ◽  
Jesus C. Hernández

The problem of reactive power compensation in electric distribution networks is addressed in this research paper from the point of view of the combinatorial optimization using a new discrete-continuous version of the vortex search algorithm (DCVSA). To explore and exploit the solution space, a discrete-continuous codification of the solution vector is proposed, where the discrete part determines the nodes where the distribution static compensator (D-STATCOM) will be installed, and the continuous part of the codification determines the optimal sizes of the D-STATCOMs. The main advantage of such codification is that the mixed-integer nonlinear programming model (MINLP) that represents the problem of optimal placement and sizing of the D-STATCOMs in distribution networks only requires a classical power flow method to evaluate the objective function, which implies that it can be implemented in any programming language. The objective function is the total costs of the grid power losses and the annualized investment costs in D-STATCOMs. In addition, to include the impact of the daily load variations, the active and reactive power demand curves are included in the optimization model. Numerical results in two radial test feeders with 33 and 69 buses demonstrate that the proposed DCVSA can solve the MINLP model with best results when compared with the MINLP solvers available in the GAMS software. All the simulations are implemented in MATLAB software using its programming environment.


Sign in / Sign up

Export Citation Format

Share Document