scholarly journals Synthesis of High-performance Composites of Poly(4-vinylpyridine-co-styrene) Copolymer (P4VPy–St) and Polyimides (PI) Having Carboxyl Pendant Groups by in-situ Polymerization and Their Mechanical Properties

2004 ◽  
Vol 36 (10) ◽  
pp. 824-829 ◽  
Author(s):  
Ryo Hamada ◽  
Keiichi Kaneko ◽  
Yuko Takeoka ◽  
Masahiro Rikukawa ◽  
Kohei Sanui
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
In Situ Polymerization ◽  
Styrene Copolymer

Toughening of Epoxy Resin Modified with In Situ Polymerized Acrylate Copolymer

2014 ◽  
Vol 910 ◽  
pp. 70-73
Author(s):  
Tao Wang ◽  
Jun Wang ◽  
Bin Zhang
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
High Performance ◽  
In Situ Polymerization ◽  
Weight Ratio ◽  
Diglycidyl Ether ◽  
Resin System ◽  
Acrylate Copolymer ◽  
Modified Epoxy

P(BA-St), a good modifier for epoxy resin, was prepared by BA and St in situ polymerization. The modified resin system was based on diglycidyl ether of bisphenol and methyl tetrahydrophthalic anhydride, tris (dimethylaminomethyl) phenol. The influence of the copolymer on mechanical properties and thermal performance of the systems was studied. When 15 wt% of the BA/St with a weight ratio composition of 7.5/7.5 was added to epoxy, high performance modified epoxy resin was obtained.

Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester

2014 ◽  
Vol 1015 ◽  
pp. 381-384
Author(s):  
Li Liu ◽  
Li Hai Cai ◽  
Dan Liu ◽  
Jun Xu ◽  
Bao Hua Guo
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Crystallization Temperature ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Single Fiber ◽  
Butylene Succinate ◽  
Crystallization Behaviors ◽  
Polymerization Method

The poly (butylene succinate) (PBS) and 3 wt% attapulgite (ATP) reinforced PBS/ATP nanocomposites with 1,6-hexanediol were fabricated using an in situ polymerization method. The crystallization behaviors indicated that ATP had effectively acted as nucleating agent, resulting in the enhancement on the crystallization temperature. The SEM results showed a superior interfacial linkage between ATP and PBS. Also, ATP could disperse as a single fiber and embed in the polymer matrix, which resulted in the improved mechanical properties.

A novel 3D porous electrode of polyaniline and PEDOT:PSS coated SiNWs for low-cost and high-performance supercapacitors

2021 ◽  
Author(s):  
Xiaojuan Shen ◽  
Xuan Zhang ◽  
Tongfei Wang ◽  
Songjun Li ◽  
Zhaoqiang Li
Keyword(s):  
High Performance ◽  
Solution Method ◽  
In Situ Polymerization ◽  
Low Cost ◽  
Porous Electrode ◽  
Simple Solution ◽  
Porous Si ◽  
Supercapacitor Electrode

In this study, a novel 3D porous Si-based supercapacitor electrode was developed by the simple solution method, which involved firstly the in-situ polymerization of polyaniline particles (PANI) on the Si...

High-performance textile electrodes for wearable electronics obtained by an improved in situ polymerization method

2019 ◽  
Vol 361 ◽  
pp. 897-907 ◽  
Author(s):  
Jingchun Lv ◽  
Peiwen Zhou ◽  
Linping Zhang ◽  
Yi Zhong ◽  
Xiaofeng Sui ◽  
...  
Keyword(s):  
High Performance ◽  
In Situ Polymerization ◽  
Wearable Electronics ◽  
Textile Electrodes ◽  
Polymerization Method

Mechanical Properties of Thermoplastic Composites via In Situ Polymerization from Cyclic Oligomers

2013 ◽  
Vol 750-752 ◽  
pp. 7-10
Author(s):  
Kou An Hao ◽  
Zhen Qing Wang ◽  
Li Min Zhou
Keyword(s):  
Mechanical Properties ◽  
In Situ Polymerization ◽  
High Viscosity ◽  
Thermoplastic Composites ◽  
Thermoplastic Matrix ◽  
Polymerization Catalyst ◽  
Short Beam ◽  
Beam Shear ◽  
Cyclic Oligomers

Fiber impregnation has been the main obstacle for thermoplastic matrix with high viscosity. This problem could be surmounted by adapting low viscous polymeric precursors Woven basalt fabric reinforced poly (butylenes terephthalate) composites were produced via in-situ polymerization at T=210°C. Before polymerization, catalyst was introduced to the reinforcement surface with different concentration. DSC is used to determine the polymerization and crystallization. SEM is used to detect whether the catalyst existed on surface. Both flexural and short-beam shear test are employed to study the corresponding mechanical properties.

scholarly journals In situ polymerization preparation and mechanical properties of nanocomposites based on PA10T/10I-block-PEG copolymer and graphene oxide

2021 ◽  
Author(s):  
Xiao-bo Fu ◽  
Xin Tong ◽  
Jia-cao Yang ◽  
Gang Zhang ◽  
Mei-lin Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
In Situ Polymerization

scholarly journals High Performance Attapulgite/Polypyrrole Nanocomposite Reinforced Polystyrene (PS) Foam Based on Supercritical CO2 Foaming

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 985 ◽  
Author(s):  
Yidong Liu ◽  
Lingfeng Jian ◽  
Tianhua Xiao ◽  
Rongtao Liu ◽  
Shun Yi ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
High Performance ◽  
In Situ Polymerization ◽  
Compression Modulus ◽  
Blowing Agents ◽  
Foaming Process ◽  
Potential Applications ◽  
Polymerization Method ◽  
Low Solubility

CO2 has been regarded as one of the most promising blowing agents for polystyrene (PS) foam due to its non-flammability, low price, nontoxicity, and eco-friendliness. However, the low solubility and fast diffusivity of CO2 in PS hinder its potential applications. In this study, an attapulgite (ATP)/polypyrrole (PPy) nanocomposite was developed using the in situ polymerization method to generate the hierarchical cell texture for the PS foam based on the supercritical CO2 foaming. The results demonstrated that the nanocomposite could act as an efficient CO2 capturer enabling the random release of it during the foaming process. In contrast to the pure PS foam, the ATP/PPy nanocomposite reinforced PS foam is endowed with high cell density (up to 1.9 × 106) and similar thermal conductivity as the neat PS foam, as well as high compression modulus. Therefore, the in situ polymerized ATP/PPy nanocomposite makes supercritical CO2 foaming desired candidate to replace the widely used fluorocarbons and chlorofluorocarbons as PS blowing agents.

scholarly journals The Effect of the Parameters of T-RTM on the Properties of Polyamide 6 Prepared by in Situ Polymerization

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 4 ◽  
Author(s):  
Orsolya Viktória Semperger ◽  
András Suplicz
Keyword(s):  
Mechanical Properties ◽  
Automotive Industry ◽  
Cycle Time ◽  
In Situ Polymerization ◽  
Rapid Development ◽  
Polyamide 6 ◽  
Raw Material ◽  
Short Cycle ◽  
Short Cycle Time

With the rapid development of the automotive industry, there is also a significant need to improve the raw materials used. Therefore, the demand is increasing for polymer composites with a focus on mass reduction and recyclability. Thermoplastic polymers are preferred because of their recyclability. As the automotive industry requires mass production, they require a thermoplastic raw material that can impregnate the reinforcement in a short cycle time. The most suitable monomer for this purpose is caprolactam. It can be most efficiently processed with T-RTM (thermoplastic resin transfer molding) technology, during which polyamide 6 is produced from the low-viscosity monomer by anionic ring-opening (in situ) polymerization in a tempered mold with a sufficiently short cycle time. Manufacturing parameters, such as polymerization time and mold temperature, highly influence the morphological and mechanical properties of the product. In this paper, the properties of polyamide 6 produced by T-RTM are analyzed as a function of the production parameters. We determine the crystallinity and the residual monomer content of the samples and their effect on mechanical properties.

Biobased thermoplastic elastomer with seamless 3D-Printability and superior mechanical properties empowered by in-situ polymerization in the presence of nanocellulose

2020 ◽  
Vol 185 ◽  
pp. 107885 ◽  
Author(s):  
Jun Mo Koo ◽  
Jaeryeon Kang ◽  
Sung-Ho Shin ◽  
Jonggeon Jegal ◽  
Hyun Gil Cha ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
In Situ Polymerization ◽  
Thermoplastic Elastomer ◽  
Superior Mechanical Properties
Sign in / Sign up

Export Citation Format

Share Document