scholarly journals The Automatic Measurement of the Drill Wear by Means of the Industrial Television : Measuring Accuracy of Outer Corner Wear

1978 ◽  
Vol 44 (385) ◽  
pp. 3260-3267 ◽  
Author(s):  
Takeshi SUGANO ◽  
Kiyomatsu TAKEUCHI ◽  
Takeshi YASUI ◽  
Minori KANAI
Keyword(s):  
Automatic Measurement ◽  
Outer Corner ◽  
Measuring Accuracy ◽  
Industrial Television

Study oil density in flow, system of automated measurement and inaccuracies

2020 ◽  
pp. 39-44
Author(s):  
M.M. Isayev ◽  
◽  
M.B. Mammadova ◽  
N.M. Khasayeva ◽  
F.Sh. Aghayeva ◽  
...  
Keyword(s):  
Measurement Errors ◽  
Automatic Measurement ◽  
Test Method ◽  
Measuring Accuracy ◽  
Fuel Density ◽  
Oil Pipelines ◽  
Operation Algorithm ◽  
Test Equation ◽  
Oil Density ◽  
Definition Of

The paper reviews the issues of specification of fluid fuel amount with high measuring accuracy transported through oil pipelines. The operation algorithm of vibration-frequency densitometer for automatic measurement of fluid fuel density with high measuring accuracy in technological process in the exploitation conditions is based on the hybrid test method. For this purpose test equations on measuring links using simple additive and multiplicative tests, as well as their combinations have been developed, test equations composed, and as a result of their solution the main test equation obtained. The mathematic-statistic estimation of the results of densitometer measurements correcting test algorithms for the definition of measurement errors and composing inaccuracies, the method of automated calibration are presented as well.

Automatic measurement of SAED patterns from asbestos minerals

1988 ◽  
Vol 46 ◽  
pp. 846-847
Author(s):  
J. C. Russ ◽  
T. Taguchi ◽  
P. M. Peters ◽  
E. Chatfield ◽  
J. C. Russ ◽  
...  
Keyword(s):  
Diffraction Pattern ◽  
High Precision ◽  
Diffraction Data ◽  
Automatic Measurement ◽  
Automatic Method ◽  
Important Method ◽  
X Ray ◽  
Integrated Intensity ◽  
Asbestiform Minerals ◽  
True Center

Conventional SAD patterns as obtained in the TEM present difficulties for identification of materials such as asbestiform minerals, although diffraction data is considered to be an important method for making this purpose. The preferred orientation of the fibers and the spotty patterns that are obtained do not readily lend themselves to measurement of the integrated intensity values for each d-spacing, and even the d-spacings may be hard to determine precisely because the true center location for the broken rings requires estimation. We have implemented an automatic method for diffraction pattern measurement to overcome these problems. It automatically locates the center of patterns with high precision, measures the radius of each ring of spots in the pattern, and integrates the density of spots in that ring. The resulting spectrum of intensity vs. radius is then used just as a conventional X-ray diffractometer scan would be, to locate peaks and produce a list of d,I values suitable for search/match comparison to known or expected phases.

Automated software supported versus manual aorto-iliac diameter measurements in CT angiography of patients with abdominal aortic aneurysms: Assessment of inter- and intraobserver variation

VASA ◽  
2005 ◽  
Vol 34 (4) ◽  
pp. 255-261 ◽  
Author(s):  
Diehm ◽  
Baumgartner ◽  
Silvestro ◽  
Herrmann ◽  
Triller ◽  
...  
Keyword(s):  
Ct Angiography ◽  
Iliac Artery ◽  
Automatic Measurement ◽  
Random Order ◽  
Aortic Aneurysms ◽  
Intraobserver Variability ◽  
Automatic Method ◽  
Left Common Iliac Artery ◽  
Abdominal Aortic ◽  
Intraobserver Variation

Background: Open surgical or endovascular abdominal aortic aneurysm (AAA) relies on precise preprocedual imaging. Purpose of this study was to assess inter- and intraobserver variation of software-supported automated and manual multi row detector CT angiography (MDCTA) in aortoiliac diameter measurements before AAA repair. Patients and methods: Thirty original MDCTA data sets (4 times 2mm collimation) of patients scheduled for endovascular AAA repair were studied on a dedicated software capable of creating two-dimensional reformatted planes orthogonal to the aortoiliac center-line. Measurements were performed twice with a four-week interval between readings. Data were analysed by two blinded readers at random order. Two different measurement methods were performed: reader-assisted freehand wall-to-wall measurement and semi-automatic measurement. Results: Aortoiliac diameters were significantly underestimated by the semi-automatic method as compared to reader-assisted measurements (p < 0.0031). Intraobserver variability of AAA diameter calculation was not significant (p > 0.15) for reader-assisted measurements except for the diameter of the left common iliac artery in reader 2 (p = 0.0045) and it was not significant (p > 0.14) using the semi-automatic method. Interobserver variability was not significant for AAA diameter measurements using the reader-assisted method and for proximal neck analysis with the semi-automatic method (p > 0.27). Relevant interobserver variation was observed for semi-automatic measurement of maximum AAA (p = 0.0007) and iliac artery diameters (p = 0.024). Conclusions: Dedicated MDCTA software provides a useful tool to minimize aortoiliac diameter measurement variation and to improve imaging precision before AAA repair. For reliable AAA diameter analysis the reader-assisted freehand measurement method is recommended to be applied to a set of reformatted CT data as provided by the software used in this study.

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

A method of jamming tolerance automatic measurement for communication receiver

2013 ◽  
Vol 26 (11) ◽  
pp. 999-1004
Author(s):  
Zhanxian Sun ◽  
Feihuang Chu ◽  
Jiang Wang ◽  
Haibing Wang
Keyword(s):  
Automatic Measurement

Apparatus for Automatic Measurement of Kernel Weight, Length, and Thickness

Crop Science ◽  
1991 ◽  
Vol 31 (5) ◽  
pp. 1314-1318 ◽  
Author(s):  
D. Paige ◽  
S. Geng ◽  
S. Jongkaewwattana
Keyword(s):  
Automatic Measurement ◽  
Kernel Weight

On the displacements of the contours of the optic-electronic space images. Mathematical modeling of displacement

2017 ◽  
Vol 992 (4) ◽  
pp. 32-38 ◽  
Author(s):  
E.G. Voronin
Keyword(s):  
Mathematical Modeling ◽  
Remote Sensing ◽  
Mathematical Model ◽  
Point Of View ◽  
Design Features ◽  
Space Images ◽  
Electronic Imaging ◽  
Measuring Accuracy ◽  
Physical Laws

The article opens a cycle of three consecutive publications dedicated to the phenomenon of the displacement of the same points in overlapping scans obtained adjacent CCD matrices with opto-electronic imagery. This phenomenon was noticed by other authors, but the proposed explanation for the origin of displacements and the resulting estimates are insufficient, and developed their solutions seem controversial from the point of view of recovery of the measuring accuracy of opticalelectronic space images, determined by the physical laws of their formation. In the first article the mathematical modeling of the expected displacements based on the design features of a scanning opto-electronic imaging equipment. It is shown that actual bias cannot be forecast, because they include additional terms, which may be gross, systematic and random values. The proposed algorithm for computing the most probable values of the additional displacement and ways to address some of the systematic components of these displacements in a mathematical model of optical-electronic remote sensing.

Sign in / Sign up

Export Citation Format

Share Document