scholarly journals An Ocean Island Geological Repository—A Second-Generation Option for Disposal of Spent Fuel and High-Level Waste

1993 ◽  
Vol 101 (1) ◽  
pp. 40-53 ◽  
Author(s):  
Charles W. Forsberg
Keyword(s):  
Second Generation ◽  
High Level Waste ◽  
Spent Fuel ◽  
Ocean Island ◽  
Geological Repository ◽  
High Level

scholarly journals Needs of countries with longer timescale for deep geological repository implementation

2020 ◽  
Vol 6 ◽  
pp. 22
Author(s):  
Bálint Nős
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
High Level Waste ◽  
Deep Geological Repository ◽  
Spent Fuel ◽  
International Consensus ◽  
Geological Disposal ◽  
Geological Repository ◽  
Deep Geological Disposal ◽  
High Level

Countries operating nuclear power plants have to deal with the tasks connected to spent fuel and high-level radioactive waste management. There is international consensus that, at this time, deep geological disposal represents the safest and most sustainable option as the end point of the management of high-level waste and spent fuel considered as waste. There are countries with longer timescale for deep geological repository (DGR) implementation, meaning that the planned date of commissioning of their respective DGRs is around 2060. For these countries cooperation, knowledge transfer, participation in RD&D programmes (like EURAD) and adaptation of good international practice could help in implementing their own programmes. In the paper the challenges and needs of a country with longer implementation timescale for DGR will be introduced through the example of Hungary.

Results of a Recent Safety Assessment of a Proposed Deep Geological Repository in the Opalinus Clay of the Zu¨rcher Weinland in Northern Switzerland

2003 ◽  
Author(s):  
J. W. Schneider ◽  
L. H. Johnson ◽  
P. Zuidema ◽  
P. Gribi ◽  
G. Mayer ◽  
...  
Keyword(s):  
Safety Assessment ◽  
Opalinus Clay ◽  
High Level Waste ◽  
Deep Geological Repository ◽  
Spent Fuel ◽  
Actual Performance ◽  
Northern Switzerland ◽  
Low Concentrations ◽  
Geological Repository ◽  
High Level

A safety assessment of a proposed deep geological repository for the direct disposal of spent UO2 or mixed-oxide fuel, vitrified high-level waste from the reprocessing of spent fuel and long-lived intermediate-level waste in the Opalinus Clay of the Zu¨rcher Weinland of northern Switzerland is described. The assessment methodology is systematic and transparent, and includes the analysis of a broad range of assessment cases, as well as complementary analyses and the formulation of more qualitative arguments. Analyses show compliance with Swiss regulatory Protection Objectives in all cases, and safety indicators complementary to dose and risk further illustrate the low concentrations and fluxes of radioactivity that are expected. No outstanding issues are identified with the potential to compromise safety. The existence of phenomena that are beneficial to safety, but are deliberately (and conservatively) excluded from the assessment (reserve FEPs) indicates that the actual performance of the repository will be even more favourable than the results of the analyses suggest.

TRU Recycling Options for Environmentally Friendly and Proliferation-Resistant Nuclear Fuel Cycle of FBR

2010 ◽  
Author(s):  
Sidik Permana ◽  
Mitsutoshi Suzuki
Keyword(s):  
High Performance ◽  
Fuel Cycle ◽  
Operation Time ◽  
Nuclear Nonproliferation ◽  
High Level Waste ◽  
Minor Actinide ◽  
Spent Fuel ◽  
Closed Fuel Cycle ◽  
The Core ◽  
High Level

The embodied challenges for introducing closed fuel cycle are utilizing advanced fuel reprocessing and fabrication facilities as well as nuclear nonproliferation aspect. Optimization target of advanced reactor design should be maintained properly to obtain high performance of safety, fuel breeding and reducing some long-lived and high level radioactivity of spent fuel by closed fuel cycle options. In this paper, the contribution of loading trans-uranium to the core performance, fuel production, and reduction of minor actinide in high level waste (HLW) have been investigated during reactor operation of large fast breeder reactor (FBR). Excess reactivity can be reduced by loading some minor actinide in the core which affect to the increase of fuel breeding capability, however, some small reduction values of breeding capability are obtained when minor actinides are loaded in the blanket regions. As a total composition, MA compositions are reduced by increasing operation time. Relatively smaller reduction value was obtained at end of operation by blanket regions (9%) than core regions (15%). In addition, adopting closed cycle of MA obtains better intrinsic aspect of nuclear nonproliferation based on the increase of even mass plutonium in the isotopic plutonium composition.

CAREM X INPRO Case Study

2004 ◽  
Author(s):  
Pablo C. Florido ◽  
Dari´o Delmastro ◽  
Daniel Brasnarof ◽  
Osvaldo E. Azpitarte
Keyword(s):  
Nuclear Reactor ◽  
Fuel Cycle ◽  
High Level Waste ◽  
Fuel Cycles ◽  
Surface Intermediate ◽  
Geological Repository ◽  
Enriched Uranium ◽  
Intermediate Storage ◽  
High Level

Argentina is performing CAREM X Nuclear System Case Study based on CAREM nuclear reactor and Once Through Fuel Cycle, using SIGMA for enriched uranium production, and a deep geological repository for final disposal of high level waste after surface intermediate storage in horizontal natural convection silos, to verify INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) methodology. Projections show that developing countries could play a crucial role in the deployment of nuclear energy, in the next fifty years. This case study will be highly useful for checking INPRO methodology for this scenario. In this contribution to ICONE 12, the preliminary findings of the Case Study are presented, including proposals to improve the INPRO methodology.

scholarly journals Spent Fuel as a Waste Form - Data Needs to Allow Long Term Performance Assessment Under Repository Disposal Conditions.

1986 ◽  
Vol 84 ◽  
Author(s):  
V. M. Oversby
Keyword(s):  
Performance Assessment ◽  
Waste Form ◽  
High Level Waste ◽  
Detailed Knowledge ◽  
Spent Fuel ◽  
Expected Performance ◽  
High Level ◽  
Term Performance ◽  
Physical And Chemical ◽  
Waste Repositories

AbstractPerformance assessment calculations are required for high level waste repositories for a period of 10,000 years under NRC and EPA regulations. In addition, the Siting Guidelines (IOCFR960) require a comparison of sites following site characterization and prior to final site selection to be made over a 100,000 year period. In order to perform the required calculations, a detailed knowledge of the physical and chemical processes that affect waste form performance will be needed for each site. While bounding calculations might be sufficient to show compliance with the requirements of IOCFR60 and 40CFRI91, the site comparison for 100,000 years will need to be based on expected performance under site specific conditions. The only case where detailed knowledge of waste form characteristics in the repository would not be needed would be where radionuclide travel times to the accessible environment can be shown to exceed 100,000 years. This paper will review the factors that affect the release of radionuclides from spemt fuel under repository conditions, summarize our present state of knowledge, and suggest areas where more work is needed in order to support the performance assessment calculations.

scholarly journals Reactive transport calculations to evaluate sulphide fluxes in the near-field of a SF/HLW repository

2019 ◽  
Vol 98 ◽  
pp. 10005
Author(s):  
Marek Pękala ◽  
Paul Wersin ◽  
Veerle Cloet ◽  
Nikitas Diomidis
Keyword(s):  
Reactive Transport ◽  
Spent Nuclear Fuel ◽  
Near Field ◽  
Opalinus Clay ◽  
High Level Waste ◽  
Waste Containment ◽  
Geological Repository ◽  
High Level ◽  
Reducing Bacteria ◽  
Hlw Repository

Radioactive waste is planned to be disposed in a deep geological repository in the Opalinus Clay (OPA) rock formation in Switzerland. Cu coating of the steel disposal canister is considered as potential a measure to ensure complete waste containment of spent nuclear fuel (SF) and vitrified high-level waste (HLW) or a period of 100,000 years. Sulphide is a potential corroding agent to Cu under reducing redox conditions. Background dissolved sulphide concentrations in pristine OPA are low, likely controlled by equilibrium with pyrite. At such concentrations, sulphide-assisted corrosion of Cu would be negligible. However, the possibility exists that sulphate reducing bacteria (SRB) might thrive at discrete locations of the repository’s near-field. The activity of SRB might then lead to significantly higher dissolved sulphide concentrations. The objective of this work is to employ reactive transport calculations to evaluate sulphide fluxes in the near-field of the SF/HLW repository in the OPA. Cu canister corrosion due to sulphide fluxes is also simplistically evaluated.

Assessment of Redox Conditions in the Near Field of Nuclear Waste Repositories: Application to the Swiss high-level and intermediate level waste disposal concept

2003 ◽  
Vol 807 ◽  
Author(s):  
Paul Wersin ◽  
Lawrence H. Johnson ◽  
Bernhard Schwyn
Keyword(s):  
Solid Phase ◽  
Near Field ◽  
Intermediate Level ◽  
Redox Conditions ◽  
High Level Waste ◽  
Redox Potentials ◽  
Spent Fuel ◽  
Reducing Conditions ◽  
High Level ◽  
Waste Repositories

ABSTRACTRedox conditions were assessed for a spent fuel and high-level waste (SF/HLW) and an intermediate-level waste (ILW) repository. For both cases our analysis indicates permanently reducing conditions after a relatively short oxic period. The canister-bentonite near field in the HLW case displays a high redox buffering capacity because of expected high activity of dissolved and surface-bound Fe(II). This is contrary to the cementitious near field in the ILW case where concentrations of dissolved reduced species are low and redox reactions occur primarily via solid phase transformation processes.For the bentonite-canister near field, redox potentials of about -100 to -300 mV (SHE) are estimated, which is supported by recent kinetic data on U, Tc and Se interaction with reduced iron systems. For the cementitious near field, redox potentials of about -200 to -800 mV are estimated, which reflects the large uncertainties related to this alkaline environment.

scholarly journals State-of-the-art and proof-of-concept installations for repository concepts based in crystalline rock

2015 ◽  
Vol 79 (6) ◽  
pp. 1665-1673 ◽  
Author(s):  
Magnus Kronberg ◽  
Jan Gugala ◽  
Keijo Haapala
Keyword(s):  
Laser Scanning ◽  
Crystalline Rock ◽  
High Level Waste ◽  
Geological Disposal ◽  
Geological Repository ◽  
Reference Design ◽  
Potential Alternative ◽  
Deep Underground ◽  
High Level

AbstractOver the last five decades private and national energy programmes worldwide have been producing a variety of radioactive wastes. One of the safest ways of disposing of this waste is to bury it deep underground in purpose-built geological disposal facilities. Currently, there is no operating geological repository in Europe for high-level waste but the goal of the IGD-TP is that the first repository shall be fully operational before the year 2025. Several studies and experiments are ongoing at various potential repository sites in Europe with the goal to establish general approaches that can be adapted for any country in need of a geological repository.The Swedish Nuclear Fuel and Waste Management Co (SKB) in Sweden and Posiva Oy in Finland are developing a method for geological disposal of high-level long-lived nuclear waste in crystalline rock, the KBS-3 method. KBS-3V (vertical) is both organizations reference design, but KBS-3H (horizontal) emplacement is also being researched as a potential alternative. Of high importance in the development is demonstrating the technical feasibilityin situof safe and reliable construction, manufacturing, disposal and sealing of such geological disposal facilities. Parts of these demonstrations are carried out under the framework of EurAtom/FP7 and one of these projects is the LUCOEX project where SKB is demonstrating horizontal emplacement, the Multi Purpose Test (MPT), and Posiva is demonstrating vertical buffer installation processes.The MPT includes the key components of the horizontal design and comprises all essential steps; manufacturing of the full-scale components, their assembly, installation in the drift and monitoring of the early buffer evolution. The MPT installation was successfully performed in late 2013. By combining the components, an initial verification of the design implementation has been achieved. At the same time, integrating the components has meant the recognition of some design weaknesses and the design will be updated accordingly.Posiva's KBS-3V buffer installation equipment that places buffer blocks with high precision in vertical deposition holes is currently being developed and will be tested during 2014 and 2015 in real underground conditions. The machine uses vacuum lifting tools for moving the buffer blocks and laser scanning technology to position both the machine and blocks. Functionality of the concept and equipment selected will be confirmed by the tests and the installation tests will provide important information about the suitability of the selected buffer dimensions and tolerances.

Sign in / Sign up

Export Citation Format

Share Document