Relating Tensile, Bending, and Shear Test Data of Asphalt Binders to Pavement Performance

1998 ◽  
Vol 7 (6) ◽  
pp. 805-811 ◽  
Author(s):  
J.-S. Chen ◽  
C.-J. Tsai
2010 ◽  
Vol 97-101 ◽  
pp. 724-727 ◽  
Author(s):  
Qun Shan Ye ◽  
Shao Peng Wu

Dynamic shear test and creep shear test were employed to investigate the dynamic properties of various fiber modified asphalt binders with the fiber content of 1.0%. The test results indicate that complex shear modulus of asphalt binders containing fibers are increased while the phase angles are decreased greatly, which implies that the asphalt binder is reinforced by the addition of fibers and the elastic property of asphalt binder is improved significantly, especially at high frequency levels. The total strain during loading period and the residual strain after the creep shear test of asphalt binders are reduced greatly by the addition of fibers. Furthermore, the creep modulus of fiber modified asphalt binders is increased and the development rate versus loading time of creep modulus is decreased.


2015 ◽  
Vol 744-746 ◽  
pp. 1273-1276
Author(s):  
Ying Wei Cheng

The pavement performance study of bituminous mixture at surface course is very important. This paper focused on comparing the pavement performance of AC-l6C, AC-l6F, Super-12.5 and SMA-16 bituminous mixtures. First the gradations and material we used were illustrated. Then the dynamic stability, water stability and texture depth of these bituminous mixtures was tested. After comparing the test data, we found that the SMA-16 bituminous mixture has the best comprehensive pavement performance and it is most suitable for the surface layer bituminous mixture of freeways in Chinese Hubei Province. Super-12.5 and AC-l6C is applicable too, but AC-l6F is improper in this region.


2007 ◽  
Author(s):  
Philip Harrison ◽  
Jo Wiggers ◽  
Andrew C. Long
Keyword(s):  

Author(s):  
Suresh Raghavendra ◽  
Claudia E. Zapata ◽  
M. Waseem Mirza ◽  
William N. Houston ◽  
Matthew W. Witczak

It is well documented that environmental effects play a significant role in characterizing material properties, which in turn affect pavement performance. Studies under the Strategic Highway Research Program (SHRP) were carried out on the age-hardening characteristics of asphalt binders and mixes. As a result, laboratory procedures to simulate the field hardening of asphalt binders and mixes, AASHTO Provisional Protocols PP1–98 and PP2–99, were developed. The approaches followed in these procedures are of great value for the ongoing research on pavement aging; however, due to limited resources and time constraints under the SHRP program, these provisional procedures have certain limitations. A research study, NCHRP Project 9–23, was initiated to overcome these limitations and enhance the predictive capabilities of these protocols. The current research paper is a part of NCHRP 9–23, which deals with the PP1–98 protocol. Binders and field cores were obtained from long-term pavement performance and other sites across the United States. Original, laboratory-aged, and field-aged binders were characterized through dynamic shear rheometer testing. The existing protocol was verified; on the basis of the findings, the protocol was improved to include the effect of field aging conditions and mix properties. The developed model was calibrated and validated with field data. Parametric analysis was performed on the final model to ascertain the practicality of the output. On the basis of those findings, a recommended provisional protocol was developed. The recommendations apply only for conventional, nonmodified binders.


2020 ◽  
Vol 10 (12) ◽  
pp. 4187
Author(s):  
Luís Picado-Santos ◽  
João Crucho

This Special Issue is dedicated to the use of nanomaterials for the modification of asphalt binders to support the analysis of the relevant properties and to determine if the modification indicated a more efficient use of asphalt mixtures’ fabrication or their modification in the context of asphalt mixtures’ fabrication and the improvement (or lack thereof) of these last ones to constitute effective asphalt pavement layers [...]


2008 ◽  
Vol 42 (22) ◽  
pp. 2315-2344 ◽  
Author(s):  
P. Harrison ◽  
J. Wiggers ◽  
A.C. Long
Keyword(s):  

Author(s):  
Y. Jane Jiang ◽  
Shiraz D. Tayabji

Over the years, pavement engineers have attempted to develop rational mechanistic-empirical (M-E) methods for predicting pavement performance. In fact, the next version of AASHTO’s Guide for Design of Pavements is planned to be mechanistically based. Many M-E procedures have been developed on the basis of a combination of laboratory test data, theory, and limited field verification. Therefore, it is important to validate and calibrate these procedures using additional data from in-service pavements. The Long-Term Pavement Performance (LTPP) program data provide the means to evaluate and improve these models. A study was conducted to assess the performance of some of the existing concrete pavement M-E-based distress prediction procedures when used in conjunction with the data being collected as part of the LTPP program. Fatigue cracking damage was estimated using the NCHRP 1–26 approach and compared with observed fatigue damage at 52 GPS-3 test sections. It was shown that the LTPP data can be used successfully to develop better insight into pavement behavior and to improve pavement performance.


Sign in / Sign up

Export Citation Format

Share Document