Amplification and frequency conversion of InGaAsP laser light in optical fiber pumped in the low dispersion region at 1.3 μm

1982 ◽  
Author(s):  
K. Washio ◽  
Y. Aoki ◽  
H. Nomura
2015 ◽  
Vol 52 (10) ◽  
pp. 102201
Author(s):  
昝清波 Zan Qingbo ◽  
郝晓剑 Hao Xiaojian ◽  
周汉昌 Zhou Hanchang

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2776
Author(s):  
José A. Borda-Hernández ◽  
Claudia M. Serpa-Imbett ◽  
Hugo E. Hernandez Figueroa

This research introduces a numerical design of an air-core vortex polymer optical fiber in cyclic transparent optical polymer (CYTOP) that propagates 32 orbital angular momentum (OAM) modes, i.e., it may support up to 64 stable OAM-states considering left- and right-handed circular polarizations. This fiber seeks to be an alternative to increase the capacity of short-range optical communication systems multiplexed by modes, in agreement with the high demand of low-cost, insensitive-to-bending and easy-to-handle fibers similar to others optical fibers fabricated in polymers. This novel fiber possesses unique characteristics: a diameter of 50 µm that would allow a high mechanical compatibility with commercially available polymer optical fibers, a difference of effective index between neighbor OAM modes of around 10−4 over a bandwidth from 1 to 1.6 µm, propagation losses of approximately 15 × 10−3 dB/m for all OAM modes, and a very low dispersion for OAM higher order modes (±l = 16) of up to +2.5 ps/km-nm compared with OAM lower order modes at a telecom wavelength of 1.3 µm, in which the CYTOP exhibits a minimal attenuation. The spectra of mutual coupling coefficients between modes are computed considering small bends of up to 3 cm of radius and slight ellipticity in the ring of up to 5%. Results show lower-charge weights for higher order OAM modes.


2007 ◽  
Vol 329 ◽  
pp. 169-174 ◽  
Author(s):  
Hiroshi Matsuura ◽  
Kazuhiro Hane ◽  
Yasuhiro Kunieda ◽  
Nobuhito Yoshihara ◽  
Ji Wang Yan ◽  
...  

The state of the wheel surface after dressing is important for processing of a surface to the nano-order level. A laser dresser was developed using ultraviolet (UV) laser light, which imparts no mechanical damage to the resin bond. One feature of this system is that UV laser energy is transmitted by a special optical fiber for UV light, and is transmitted only to the resin bond. Using this newly developed laser dresser, it was possible to ablate the resin bond to a depth of over 2 microns using a fiber with a core diameter of 200 microns.


2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Zaijin Fang ◽  
Xusheng Xiao ◽  
Xin Wang ◽  
Zhijun Ma ◽  
Elfed Lewis ◽  
...  

2004 ◽  
Vol 43 (12) ◽  
pp. 2896 ◽  
Author(s):  
Galina M. Ermolaeva

2005 ◽  
Vol 44 (16) ◽  
pp. 3266 ◽  
Author(s):  
Katsumasa Iwai ◽  
Yi-Wei Shi ◽  
Yuji Matsuura ◽  
Mitsunobu Miyagi ◽  
Seichi Saito ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document