Electron Density and Gas Temperature from Line Broadening in an Argon Surface-Wave-Sustained Discharge at Atmospheric Pressure

2004 ◽  
Vol 58 (9) ◽  
pp. 1032-1037 ◽  
Author(s):  
M. Christova ◽  
E. Castaños-Martinez ◽  
M. D. Calzada ◽  
Y. Kabouzi ◽  
J. M. Luque ◽  
...  
2008 ◽  
Author(s):  
M. Christova ◽  
L. Christov ◽  
E. Castaños-Martinez ◽  
M. S. Dimitrijević ◽  
M. Moisan ◽  
...  

2008 ◽  
Author(s):  
M. Jasinski ◽  
Z. Zakrzewski ◽  
J. Mizeraczyk ◽  
Hans-Jürgen Hartfuss ◽  
Michel Dudeck ◽  
...  

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Thi-Thuy-Nga Nguyen ◽  
Minoru Sasaki ◽  
Takayoshi Tsutsumi ◽  
Kenji Ishikawa ◽  
Masaru Hori

Abstract A green method to synthesize spherical Sn particles by reducing SnO2 film in atmospheric-pressure H2/Ar plasma at low temperatures for various applications is presented. The floating wire-assisted remotely-generated plasma with a mixture of 0.05% H2/Ar gas formed spherical metallic Sn particles by reducing a SnO2 layer on glass substrate. During the reduction process, H radical density was measured by using vacuum ultraviolet absorption spectroscopy, and plasma properties including electron density and gas temperature were diagnosed by optical emission spectroscopy. The inductively coupled generated plasma with a high electron density of 1014 cm−3, a hydrogen atom density of 1014 cm−3, and a gas temperature of 940 K was obtained at a remote region distance of 150 mm where the SnO2/glass substrate was placed for plasma treatment. The process has been modeled on the spherical Sn formation based on the reduction of SnO2 films using H radicals. Depending on the treatment condition, the total reduction area, where spherical Sn particles formed, was enlarged and could reach 300 mm2 after 2 min. The substrate temperature affected the expansion rate of the total reduction area and the growth of the Sn spheres.


2006 ◽  
Vol 56 (S2) ◽  
pp. B964-B970 ◽  
Author(s):  
H. Nowakowska ◽  
M. Jasiński ◽  
J. Mizeraczyk ◽  
Z. Zakrzewski ◽  
Y. Kabouzi ◽  
...  

2005 ◽  
Vol 59 (4) ◽  
pp. 519-528 ◽  
Author(s):  
M. C. García ◽  
C. Yubero ◽  
M. D. Calzada ◽  
M. P. Martínez-Jiménez

A surface-wave-sustained discharge created by using a surfatron device in a tube open to the atmosphere can be used to maintain a microwave (2.45 GHz) plasma at atmospheric pressure at powers of less than 300 W. The TIA ( Torche à Injection Axiale) is a device also producing a plasma that, moreover, permits us to work at high power (higher than 200 W and up to 1000 W). A study of the departure from the thermodynamic equilibrium existing in the argon plasmas created by both devices has been done by using optical emission spectroscopy techniques in order to characterize them and to evaluate their possible advantages when they are used for applied purposes.


Sign in / Sign up

Export Citation Format

Share Document