scholarly journals Mechanistic modeling and numerical simulation of axial flow catalytic reactor for naphtha reforming unit

PLoS ONE ◽  
2020 ◽  
Vol 15 (11) ◽  
pp. e0242343
Author(s):  
Mahboubeh Pishnamazi ◽  
Ali Taghvaie Nakhjiri ◽  
Mashallah Rezakazemi ◽  
Azam Marjani ◽  
Saeed Shirazian

Naphtha catalytic reforming (NCR) process has been of tremendous attention all over the world owing to the significant requirement for high-quality gasoline. Industrialized naphtha reforming unit at oil refineries applies a series of fixed bed reactors (FBRs) to improve the quality of the low-octane hydrocarbons and convert them to more valuable products. The prominent purpose of this research is to understand the catalytic reactor of naphtha reforming unit. For this aim, an appropriate mechanistic modeling and its related CFD-based computational simulation is presented to predict the behavior of the system when the reactors are of the axial flow type. Also, the triangular meshing technique (TMT) is performed in this paper due to its brilliant ability to analyze the results of model’s predictions along with improving the computational accuracy. Additionally, mesh independence analysis is done to find the optimum number of meshes needed for reaching the results convergence. Moreover, suitable kinetic and thermodynamic equations are derived based on Smith model to describe the NCR process. The results proved that the proceeding of NCR process inside the reactor significantly increased the concentration amount of aromatic materials, lighter ends and hydrogen, while deteriorated the concentration amount of naphthene and paraffin. Moreover, the pressure drop along the reactor length was achieved very low, which can be considered as one of the momentous advantages of NCR process.

2017 ◽  
Vol 68 (7) ◽  
pp. 1496-1500
Author(s):  
Rami Doukeh ◽  
Mihaela Bombos ◽  
Ancuta Trifoi ◽  
Minodora Pasare ◽  
Ionut Banu ◽  
...  

Hydrodesulphurization of dimethyldisulphide was performed on Ni-Co-Mo /�-Al2O3 catalyst. The catalyst was characterized by determining the adsorption isotherms, the pore size distribution and the acid strength. Experiments were carried out on a laboratory echipament in continuous system using a fixed bed catalytic reactor at 50-100�C, pressure from 10 barr to 50 barr, the liquid hourly space velocity from 1h-1 to 4h-1 and the molar ratio H2 / dimethyldisulphide 60/1. A simplified kinetic model based on the Langmuir�Hinshelwood theory, for the dimethyldisulphide hydrodesulfurization process of dimethyldisulphide has been proposed. The results show the good accuracy of the model.


2011 ◽  
Vol 6 (1) ◽  
Author(s):  
Amir Rahimi ◽  
Sogand Hamidi

In this study, the performance of a fixed–bed tubular reactor for the production of phthalic anhydride is mathematically analyzed. The conversion degree and reactor temperature values are compared with the measured one in a tubular reactor applied in Farabi petrochemical unit in Iran as well as reported data in the literature for a pilot plate. The comparisons are satisfactory. The effects of some operating parameters including reactor length, feed temperature, reactor pressure, and existence of an inert in the catalytic bed are investigated. The optimum value of each parameter is determined on the basis of the corresponding operating conditions.


Author(s):  
A. Brito ◽  
M. E. Borges ◽  
R. Arvelo ◽  
F. Garcia ◽  
M. C. Diaz ◽  
...  

The transesterification reaction is the most utilized process to obtain biodiesel. Fried oil transesterification reactions with methanol have been studied using several zeolites Y and interchanged with CsCl and KOH. The reaction has been carried out both in a slurry reactor and a fixed bed catalytic reactor. The catalytic effects of zeolites have been tested within a temperature range of 60-476°C, 2.5-5% catalyst/waste oil weight ratio, and 6:1 - 100:1 methanol/oil molar ratio. Cosolvents (THF, n-hexane) in the reaction feedstock effect have also been studied as well as catalyst regeneration effects. Viscosity of both the oil and the transesterification reaction products was determined as an initial guide to investigate the degree of conversion to biodiesel as well as FAME content by GC. When interchanged zeolites are used conversions are improved, getting the best yields (98% FAME) for the Y756 zeolite interchanged with KOH. Viscosities of the reaction product obtained reached values next to diesel standard ones.


2021 ◽  
Author(s):  
Nikhil Margi ◽  
Ganapati D Yadav

The current industrial process of pseudoionone synthesis from citral uses a homogeneous catalyst with excessive acetone as a solvent-cum reactant in a stirred tank batch reactor. This process has several...


2020 ◽  
Vol 9 (1) ◽  
pp. 107-112 ◽  
Author(s):  
I. Istadi ◽  
Teguh Riyanto ◽  
Luqman Buchori ◽  
Didi Dwi Anggoro ◽  
Roni Ade Saputra ◽  
...  

Plasma-assisted catalytic cracking is an attractive method for producing biofuels from vegetable oil. This paper studied the effect of reactor temperature on the performance of plasma-assisted catalytic cracking of palm oil into biofuels. The cracking process was conducted in a Dielectric Barrier Discharge (DBD)-type plasma reactor with the presence of spent RFCC catalyst. The reactor temperature was varied at 400, 450, and 500 ºC. The liquid fuel product was analyzed using a gas chromatography-mass spectrometry (GC-MS) to determine the compositions. Result showed that the presenceof plasma and catalytic role can enhance the reactor performance so that the selectivity of the short-chain hydrocarbon produced increases. The selectivity of gasoline, kerosene, and diesel range fuels over the plasma-catalytic reactor were 16.43%, 52.74% and 21.25%, respectively, while the selectivity of gasoline, kerosene and diesel range fuels over a conventional fixed bed reactor was 12.07%, 39.07%, and 45.11%, respectively. The increasing reactor temperature led to enhanced catalytic role of cracking reaction,particularly directing the reaction to the shorter hydrocarbon range. The reactor temperature dependence on the liquid product components distribution over the plasma-catalytic reactor was also studied. The aromatic and oxygenated compounds increased with the reactor temperature.©2020. CBIORE-IJRED. All rights reserved


AIChE Journal ◽  
2017 ◽  
Vol 63 (11) ◽  
pp. 5029-5043 ◽  
Author(s):  
Austin P. Ladshaw ◽  
Sotira Yiacoumi ◽  
Ronghong Lin ◽  
Yue Nan ◽  
Lawrence L. Tavlarides ◽  
...  

2008 ◽  
Vol 130 (32) ◽  
pp. 10452-10453 ◽  
Author(s):  
Igor V. Koptyug ◽  
Alexey V. Khomichev ◽  
Anna A. Lysova ◽  
Renad Z. Sagdeev

Sign in / Sign up

Export Citation Format

Share Document