scholarly journals Optimal Operating Conditions for Capillary Breakup Rheometry Based on Half-times of Liquid Bridges

2020 ◽  
Author(s):  
Joseph Connell ◽  
Murray Rudman ◽  
Ranganathan Prabhakar
Keyword(s):  
Operating Conditions ◽  
Liquid Bridges ◽  
Optimal Operating ◽  
Capillary Breakup

Studies of microbial acclimation to hard chemicals on the basis of respiratory quinone profiles and kinetic analyses

1996 ◽  
Vol 34 (5-6) ◽  
pp. 249-256 ◽  
Author(s):  
Hong-Ying Hu ◽  
Mamie Nozawa ◽  
Koichi Fujie ◽  
Tsuyoshi Makabe ◽  
Kohei Urano
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Population Dynamics ◽  
Volatile Substance ◽  
Operating Conditions ◽  
Biological Wastewater Treatment ◽  
Basic Information ◽  
Optimal Operating ◽  
Respiratory Quinone ◽  
Treatment Processes ◽  
Quinone Profile

The population dynamics of microbes in the biological wastewater treatment processes such as a submerged biofilter was investigated to obtain basic information to determine the optimal operating conditions. The effects of coexistence of biodegradable substances such as glucose and peptone on the acclimation of microbes in the biofilm to hard chemicals such as acrylonitrile (AN), which is poorly biodegradable and a volatile substance, was investigated on the basis of the respiratory quinone profile. Kinetic study of the removal of AN in the course of acclimation of microbes was investigated using a laboratory-scale submerged biofilter as well. It was ascertained that the acclimation of the microbes to AN was accelerated by coexistence of biodegradable substances, and the microbial phase after acclimation differed from those with the coexistence of glucose and peptone. The quinone profiles in the acclimation showed that Brevibacterium sp. and Pseudomonas aeruginosa, of which the predominant quinone of the respiratory chain is menaquinone-8(H2) and ubiquinone-9, respectively, multiplied selectively in the acclimation course without and with the coexistence of glucose and peptone, respectively. It was also made clear that there were few kinds and number of protozoa and metazoa in the biofilter treating the wastewater containing AN.

scholarly journals Evaporator Optimization of Refrigerator Systems Using Quality Analysis

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 555
Author(s):  
Sangkyung Na ◽  
Sanghun Song ◽  
Seunghyuk Lee ◽  
Jehwan Lee ◽  
Hyun Kim ◽  
...  
Keyword(s):  
Power Consumption ◽  
Operating Time ◽  
Cooling Capacity ◽  
Operating Conditions ◽  
Quality Analysis ◽  
Lubricating Oil ◽  
Optimal Operating ◽  
Compressor Piston ◽  
Refrigerator Temperature ◽  
Visualization Experiments

In this study, evaporator optimization, via both experimental and simulation methods was conducted. To evaluate the evaporator performance, under the optimal system, the compressor operating time and the effects of oil on the refrigerator system were studied. If the temperature of the refrigerator chamber reaches the setting value, the compressor stops working and it leads to the temperature of the refrigerator chamber slowly increasing, due to the heat transfer to the ambient. When the refrigerator temperature is out of the setting range, the compressor works again, and the refrigerator repeats this process until the end of its life. These on/off period can be controlled through the compressor piston movement. To determine the optimal compressor operating conditions, experiments of monthly power consumption were conducted under various compressor working times and the lowest power consumption conditions was determined when the compressor worked continuously. Lubricating oil, the refrigerator system, using oil, also influenced the system performance. To evaluate the effect of oil, oil eliminated and oil systems were compared based on cooling capacity and power consumption. The cooling capacity of the oil eliminated system was 2.6% higher and the power consumption was 3.6% lower than that of the oil system. After determining the optimal operating conditions of the refrigerator system, visualization experiments and simulations were conducted to decide the optimal evaporator and the conventional evaporator size can be reduced by approximately 2.9%.

scholarly journals Chemical–Electrochemical Process Concept for Lead Recovery from Waste Cathode Ray Tube Glass

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1546
Author(s):  
Árpád Imre-Lucaci ◽  
Melinda Fogarasi ◽  
Florica Imre-Lucaci ◽  
Szabolcs Fogarasi
Keyword(s):  
Flow Rate ◽  
Current Density ◽  
Complete Recovery ◽  
Electrochemical Process ◽  
Operating Conditions ◽  
General Effect ◽  
Optimal Operating ◽  
Recirculation Flow ◽  
Lead Recovery ◽  
Cathode Ray Tube

This paper presents a novel approach for the recovery of lead from waste cathode-ray tube (CRT) glass by applying a combined chemical-electrochemical process which allows the simultaneous recovery of Pb from waste CRT glass and electrochemical regeneration of the leaching agent. The optimal operating conditions were identified based on the influence of leaching agent concentration, recirculation flow rate and current density on the main technical performance indicators. The experimental results demonstrate that the process is the most efficient at 0.6 M acetic acid concentration, flow rate of 45 mL/min and current density of 4 mA/cm2. The mass balance data corresponding to the recycling of 10 kg/h waste CRT glass in the identified optimal operating conditions was used for the environmental assessment of the process. The General Effect Indices (GEIs), obtained through the Biwer Heinzle method for the input and output streams of the process, indicate that the developed recovery process not only achieve a complete recovery of lead but it is eco-friendly as well.

Experimental Investigation on the Performance of a Formic Acid Electrolyte-Direct Methanol Fuel Cell

2013 ◽  
Vol 11 (2) ◽  
Author(s):  
David Ouellette ◽  
Cynthia Ann Cruickshank ◽  
Edgar Matida
Keyword(s):  
Fuel Cell ◽  
Formic Acid ◽  
Power Output ◽  
Direct Methanol Fuel Cell ◽  
Operating Conditions ◽  
Portable Devices ◽  
Acid Electrolyte ◽  
Optimal Operating ◽  
Direct Methanol ◽  
Methanol Fuel Cell

The performance of a new methanol fuel cell that utilizes a liquid formic acid electrolyte, named the formic acid electrolyte-direct methanol fuel cell (FAE-DMFC) is experimentally investigated. This fuel cell type has the capability of recycling/washing away methanol, without the need of methanol-electrolyte separation. Three fuel cell configurations were examined: a flowing electrolyte and two circulating electrolyte configurations. From these three configurations, the flowing electrolyte and the circulating electrolyte, with the electrolyte outlet routed to the anode inlet, provided the most stable power output, where minimal decay in performance and less than 3% and 5.6% variation in power output were observed in the respective configurations. The flowing electrolyte configuration also yielded the greatest power output by as much as 34%. Furthermore, for the flowing electrolyte configuration, several key operating conditions were experimentally tested to determine the optimal operating points. It was found that an inlet concentration of 2.2 M methanol and 6.5 M formic acid, as along with a cell temperature of 52.8 °C provided the best performance. Since this fuel cell has a low optimal operating temperature, this fuel cell has potential applications for handheld portable devices.

Photo-degradation of butyl parahydroxybenzoate by using TiO2-supported catalyst

2013 ◽  
Vol 67 (10) ◽  
pp. 2141-2147 ◽  
Author(s):  
Patrick Atheba ◽  
Patrick Drogui ◽  
Brahima Seyhi ◽  
Didier Robert
Keyword(s):  
Flow Rate ◽  
Photocatalytic Oxidation ◽  
Supported Catalyst ◽  
Operating Conditions ◽  
Treatment Efficiency ◽  
Optimal Operating ◽  
Photo Degradation ◽  
Photochemical Process ◽  
Recirculation Flow ◽  
High Treatment

The present work evaluates the potential of the photocatalysis (PC) process for the degradation of butylparaben (BPB). Relatively high treatment efficiency was achieved by comparison to photochemical process. Prior to photocatalytic degradation, adsorption (AD) of BPB occurred on the titanium dioxide (TiO2)-supported catalyst. AD was described by Langmuir isotherm (KL = 0.085 L g−1, qm = 4.77 mg g−1). The influence of angle of inclination of the reactor, pH, recirculation flow rate and initial concentration of BPB were investigated. The PC process applied under optimal operating conditions (recirculation flow rate of 0.15 L min−1, angle of inclination of 15°, pH = 7 and 5 mg L−1 of BPB) is able to oxidize 84.9–96.6% of BPB and to ensure around 38.7% of mineralization. The Langmuir–Hinshelwood kinetic model described well the photocatalytic oxidation of BPB (k = 7.02 mg L−1 h−1, K = 0.364 L mg−1).

Hydrogen Production via Catalytic Autothermal Reforming of Desulfurized Jet-A Fuel

2016 ◽  
Author(s):  
Shuyang Zhang ◽  
Xiaoxin Wang ◽  
Peiwen Li
Keyword(s):  
Energy Efficiency ◽  
Hydrogen Production ◽  
Hydrogen Storage ◽  
Coke Formation ◽  
Autothermal Reforming ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Conversion ◽  
Optimal Operating ◽  
Reaction Equilibrium

On-board hydrogen production via catalytic autothermal reforming is beneficial to vehicles using fuel cells because it eliminates the challenges of hydrogen storage. As the primary fuel for both civilian and military air flight application, Jet-A fuel (after desulfurization) was reformed for making hydrogen-rich fuels in this study using an in-house-made Rh/NiO/K-La-Ce-Al-OX ATR catalyst under various operating conditions. Based on the preliminary thermodynamic analysis of reaction equilibrium, important parameters such as ratios of H2O/C and O2/C were selected, in the range of 1.1–2.5 and 0.5–1.0, respectively. The optimal operating conditions were experimentally obtained at the reactor’s temperature of 696.2 °C, which gave H2O/C = 2.5 and O2/C = 0.5, and the obtained fuel conversion percentage, hydrogen yield (can be large than 1 from definition), and energy efficiency were 88.66%, 143.84%, and 64.74%, respectively. In addition, a discussion of the concentration variation of CO and CO2 at different H2O/C, as well as the analysis of fuel conversion profile, leads to the finding of effective approaches for suppression of coke formation.

Sign in / Sign up

Export Citation Format

Share Document