scholarly journals Study of the pterigidal canal (vidian canal) through images of cone beam computer tomography.

2020 ◽  
Vol 23 (3) ◽  
Author(s):  
Fernanda Fritoli Marcondes Santana ◽  
Marcos Paulo Motta Silveira ◽  
Pedro Jacy Santos Diamantino ◽  
Karolina Aparecida Castilho Fardim ◽  
Luiz Roberto Coutinho Manhães Júnior ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Close Contact ◽  
Close Relation ◽  
Cone Beam ◽  
Inferior Wall ◽  
Mean Values ◽  
Vidian Canal ◽  
Foramen Rotundum ◽  
The Mean ◽  
The Right

Objective: The aim of this study was to evaluate the pterygoid canal (PC) by Cone Beam Computed Tomography (CBCT), establishing its configuration and proximity with anatomical structures. Material and Methods: We evaluated 398 CBCT exams, all from a public University radiology clinic archive. Four parameters were evaluated: single or double PC, distance between PC and the inferior part of the sphenoid sinus (SS), ratio of PC and SS and the distance between the PC and the foramen rotundum. Results: It was observed that most of the PC of the sample presented simple morphology, the most frequent type of relationship between the PC and the SS on both sides was the close contact with the wall. Among the cases that there were some distances between the PC and the inferior wall of the SS, the mean of this distance did not exceed 3.20 mm, being the left side (3.03 mm) slightly closer than the right (3.20 mm). Finally, the distances between the PC and the corresponding Foramen Rotundum are presented with mean values of 5.87 mm for the right side and 6.31 mm for the left side. Conclusion: CBCT examination is of paramount importance for PC identification; once in the studied sample, the mean values found evidence the close relation between the PC and the SS.KeywordsCone beam computed tomography; Endonasal approach; Vidian canal.

scholarly journals Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
P. López-Jarana ◽  
C. M. Díaz-Castro ◽  
A. Falcão ◽  
C. Falcão ◽  
J. V. Ríos-Santos ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Thickness ◽  
Height Difference ◽  
Mean Values ◽  
The Mean ◽  
Maxilla And Mandible ◽  
Palatal Bone ◽  
Two Parameters

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

scholarly journals Articular Eminence Inclination, Height, and Condyle Morphology on Cone Beam Computed Tomography

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Dilhan İlgüy ◽  
Mehmet İlgüy ◽  
Erdoğan Fişekçioğlu ◽  
Semanur Dölekoğlu ◽  
Nilüfer Ersan
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mean Value ◽  
Cone Beam ◽  
Articular Eminence ◽  
Age And Gender ◽  
Mean Values ◽  
The Mean ◽  
And Gender ◽  
The Relationship

Aim. The aim of the present study was to examine the relationship between articular eminence inclination, height, and thickness of the roof of the glenoid fossa (RGF) according to age and gender and to assess condyle morphology including incidental findings of osseous characteristics associated with osteoarthritis (OA) of the temporomandibular joint (TMJ) using cone beam computed tomography (CBCT).Materials and Methods. CBCT images of 105 patients were evaluated retrospectively. For articular eminence inclination and height, axial views on which the condylar processes were seen with their widest mediolateral extent being used as a reference view for secondary reconstruction. Condyle morphology was categorized both in the sagittal and coronal plane.Results. The mean values of eminence inclination and height of males were higher than those of females (P<0.05). There were significant differences in the RGF thickness in relation to sagittal condyle morphology. Among the group of OA, the mean value of the RGF thickness for “OA-osteophyte” group was the highest (1.59 mm), whereas the lowest RGF values were seen in the “OA-flattening.”Conclusion. The sagittal osteoarthritic changes may have an effect on RGF thickness by mechanical stimulation and changed stress distribution. Gender has a significant effect on eminence height (Eh) and inclination.

scholarly journals Custom Focal Trough in Cone-Beam Computed Tomography Reformatted Panoramic Versus Digital Panoramic for Mental Foramen Position to Aid Implant Planning

2020 ◽  
Vol 10 ◽  
pp. 34
Author(s):  
Khaled Beshtawi ◽  
Emad Qirresh ◽  
Mohamed Parker ◽  
Shoayeb Shaik
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Reference Points ◽  
Cone Beam ◽  
Vertical Position ◽  
Linear Measurements ◽  
Mean Values ◽  
The Mean ◽  
High Level

Objectives: To compare the linear measurements from digital panoramic (DP) radiographs and cone-beam computed tomography (CBCT) volumes for the localization of the mental foramen (MF). Material and Methods: Thirty-one patients with panoramic and CBCT radiographs depicted on the same machine were analyzed. The vertical and horizontal positions of the MF were compared by the differences in distances measured from reference points to the boundaries (tangents) of the MF in digital panoramic (DP) and CBCT reformatted panoramic (CRP) views. The vertical position of MF was also analyzed on CBCT oblique coronal views (CORO) and compared with its corresponding distances on DP and CRP views. Results: Statistically significant differences (P < 0.05) were found in all compared measurements between CRP and DP views. In addition, the vertical distance (Y1) compared between DP, CRP, and CORO views also showed a statistically significant measurement discrepancy in the mean distance (P < 0.000) with the highest mean difference of 1.59 mm (P < 0.05) was attained from Y1 (DP-CORO). Inter- and intra-examiner analysis indicated a high level of agreement for all measurements. Conclusion: The mean values of discrepancies in measurements between DP and CRP views for horizontal and vertical linear measurements were clinically tolerable. Nevertheless, significant differences in the vertical MF position were detected between the panoramic views (DP, CRP) and the coronal views (CORO). This implies that the use of coronal view measurements during implant planning might reduce the risk of neurovascular injuries.

scholarly journals Second Root Canal in Mandibular Incisors: an Ex Vivo Cone-Beam Computed Tomography (CBCT) Study

2018 ◽  
Vol 22 (1) ◽  
pp. 38-42
Author(s):  
Maria Elpida Kalaitzoglou ◽  
Eleni Kantilieraki ◽  
Charalampos Beltes ◽  
Christos Angelopoulos ◽  
Panagiotis Beltes
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Ex Vivo ◽  
Cone Beam ◽  
Mean Values ◽  
Root Canals ◽  
The Mean ◽  
Type 3 ◽  
Mandibular Incisors

SummaryBackground/Aim: To analyze the internal morphology of mandibular incisors with two root canals using cone-beam computed tomography (CBCT). Material and Methods: 289 (143 central and 146 lateral) extracted intact mandibular incisors were radiographed for detection of a second root canal. The teeth presenting a second root canal were imaged with CBCT and evaluated regarding: root canal type, the distance of the cementoenamel junction (CEJ) to the bifurcation of the canals and the distance of the canal fusion to the apical foramen (in teeth in which canals rejoined). Results: Out of 143 central and 146 lateral mandibular incisors, 41 (28.7%) and 44 (30.1%) teeth respectively showed a second root canal. Types II, III, V and an additional type to Vertucci’s classification were identified. Type III was the most prevalent and presented in 30 (73.2%) central and 34 (77.3%) lateral mandibular incisors with two root canals. The mean values of the distance of the CEJ to the canal bifurcation were 4.2 mm and 4.0 mm for central and lateral mandibular incisors respectively. The mean values of the distance of the canal fusion to the apical foramen 5.5 mm and 5.1 mm for central and lateral mandibular incisors respectively. Conclusions: Mandibular incisors with two root canals mainly present with Vertucci’s Type 3 canal configuration. The canal bifurcation was identified mostly at the coronal and middle thirds of the root, while the canal fusion occurred in the middle third of the root.

scholarly journals Root proximity of miniscrews at a variety of maxillary and mandibular buccal sites: Reliability of panoramic radiography

2019 ◽  
Vol 89 (4) ◽  
pp. 611-616 ◽  
Author(s):  
Jae-Hwa An ◽  
Yong-Il Kim ◽  
Seong-Sik Kim ◽  
Soo-Byung Park ◽  
Woo-Sung Son ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Orthognathic Surgery ◽  
Panoramic Radiography ◽  
Cone Beam ◽  
Central Incisor ◽  
Intermaxillary Fixation ◽  
Extreme Caution ◽  
The Mean ◽  
Root Proximity ◽  
The Right

ABSTRACT Objectives: To assess the root proximity and the insertion angles of miniscrews after miniscrew placement at a variety of maxillary and mandibular buccal sites using cone-beam computed tomography (CBCT) and to determine the differences in root proximity between CBCT and panoramic radiography (PR). Materials and Methods: This retrospective study included 50 patients (mean age, 22.0 ± 4.5 years) who underwent postoperative CBCT and PR after miniscrew placements for intermaxillary fixation in orthognathic surgery. Twelve miniscrews were placed in the buccal bone of each patient: at sites between the central incisor and lateral incisor (SII), sites between the canine and first premolar (SCP), and sites between the second premolar and first molar (SPM) on the right and left sides of the mandible and maxilla. The insertion angles were measured on CBCT, and the root proximity was assessed on CBCT and PR. Results: The mean vertical placement angles ranged from 84.27° to 95.12°, and the mean horizontal placement angles ranged from 90.93° to 101.1°. The rates of no contact between the root and the miniscrew were 68.0% in the SII, 50.5% in the SCP, and 57.8% in the SPM, which were significantly different (P = .000). The total concordance rate between PR and CBCT was 41.3%. Conclusions: Clinicians should use extreme caution during placement of miniscrews in the SCP. There are limitations on the use of PR for evaluating the root proximity of miniscrews.

Can palatal depth influence the buccolingual inclination of molars? A cone beam computed tomography-based retrospective evaluation

2020 ◽  
Vol 47 (4) ◽  
pp. 303-310
Author(s):  
Prasanna Arvind TR ◽  
SP Saravana Dinesh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Tamil Nadu ◽  
Cone Beam ◽  
Skeletal Class ◽  
The Mean ◽  
Student’S T ◽  
Suitable Reference ◽  
The Right ◽  
Vertical Growth Pattern

Objective: To interpret a correlation between buccolingual inclination of molars and palatal depth in hyperdivergent patients and to identify importance of determining inclination of molars in assessing transverse discrepancies (as skeletal or dental) Design: This was a retrospective cone beam computed tomography (CBCT) study. Setting: The study was conducted in the Department of Orthodontics, Saveetha Dental College and Hospital, Tamil Nadu, India. Methods: This was a retrospective CBCT study of 79 patients who underwent diagnostic CBCT for treatment purposes. The CBCT scans were evaluated systematically and the required parameters were accessed with suitable reference planes. Student’s t-test (95% confidence interval) was performed to determine buccolingual inclination of first molars between the right and left sides. Only patients with a vertical growth pattern and skeletal class I relation were included and they were classified into three groups based on their palate depth. Results: In patients with palatal depth > 22 mm, the mean inclination of molars was 7.4°; with palatal depth in the range of 19–22 mm, the mean inclination of molars was 5.23°; and with palatal depth < 19 mm, the mean inclination of molars was 2.9°. Results showed that there was a significant correlation between the buccolingual inclination of molars and the palate depth in vertical growers ( P < 0.05). Conclusion: The buccolingual inclination of first molars is increased in patients with greater palatal depth. This parameter is helpful in classifying crossbites as skeletal or dental. The amount of compensation required to correct the cross bite can be adjusted using Korkhaus Index.

scholarly journals A volumetric study of mandibular condyles in orthognathic patients by semiautomatic segmentation

2021 ◽  
Author(s):  
Max-Philipp Lentzen ◽  
Maximilian Riekert ◽  
Johannes Buller ◽  
Andrea Grandoch ◽  
Matthias Zirk ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Volumetric Analysis ◽  
Cone Beam ◽  
Bivariate Analysis ◽  
Semiautomatic Segmentation ◽  
Computed Tomography Images ◽  
Precise Knowledge ◽  
The Mean ◽  
The Right

Abstract Purpose This study was conducted to elucidate volumetric data of mandibular condyles of orthognathic patients by analyzing cone beam computed tomography images based upon semiautomatic segmentation. Methods Cone beam computed tomography images of 87 patients with malocclusions were analyzed in this retrospective study. Patients were between 17 and 53 years old and diagnosed with Angle class I, II, or III malocclusion. By using the validated open-source software “ITK-SNAP,” the volumetric measurements of 174 mandibular condyles were performed. Volumetric analysis was performed according to intra-subject side differences by paired Student t test. In accordance to inter-subject side, gender, age and type of malocclusion differences bivariate analysis and ANOVA were applied. Results The mean volume for the right condyle was 1.378 ± 0.447 cm3, with a maximum of 2.379 cm3 and a minimum of 0.121 cm3. The mean volume for the left side was 1.435 ± 0.474 cm3, with a maximum of 3.264 cm3 and a minimum of 0.109 cm3. Bivariate analysis indicated a highly significant inter-subject difference between the volume of the left and right mandibular condyles (p < 0.01). Females had a significantly smaller condyle volume than males (p < 0.05 left condyle; p < 0.01 right condyle). Conclusion The fact that shape and volume of mandibular condyles show a high susceptibility to pathological alterations and particularly malocclusions makes a precise knowledge about volumetric changes indispensable. Our results show that significant inter-subject differences in condyle volume could be found with respect to the side and gender. Larger volumes could be assessed for the left condyle and for male patients.

scholarly journals Cone-Beam Computed Tomography Evaluation of Mental Foramen Variations: A Preliminary Study

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Mahnaz Sheikhi ◽  
Mitra Karbasi Kheir ◽  
Ehsan Hekmatian
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Cone Beam ◽  
Vertical Position ◽  
3 Dimensional ◽  
The Mean ◽  
The Right ◽  
Common Shape ◽  
Surgical Operations

Background. Mental foramen is important in surgical operations of premolars because it transfers the mental nerves and vessels. This study evaluated the variations of mental foramen by cone-beam computed tomography among a selected Iranian population.Materials and Methods. A total number of 180 cone-beam computed tomography projections were analyzed in terms of shape, size, direction, and horizontal and vertical positions of mental foramen in the right and left sides.Results. The most common shape was oval, opening direction was posterior-superior, horizontal position was in line with second premolar, and vertical position was apical to the adjacent dental root. The mean of foremen diameter was 3.59 mm.Conclusion. In addition to the most common types of mental foramen, other variations exist, too. Hence, it reflects the significance of preoperative radiographic examinations, especially 3-dimensional images to prevent nerve damage.

scholarly journals Evaluation of condyle-fossa relationships in adolescents with various skeletal patterns using cone-beam computed tomography

2019 ◽  
Vol 90 (2) ◽  
pp. 224-232
Author(s):  
Jong-Moon Chae ◽  
Jae Hyun Park ◽  
Kiyoshi Tai ◽  
Kyosuke Mizutani ◽  
Satoshi Uzuka ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Joint Space ◽  
Cone Beam ◽  
Class Iii ◽  
Mean Values ◽  
Skeletal Pattern ◽  
Lateral Space ◽  
Left And Right ◽  
The Mean

ABSTRACT Objectives: To evaluate the condyle-fossa relationship in adolescents with various skeletal patterns using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images obtained in 120 adolescent patients were used for this study. The patients were divided into 3 groups according to 3 criteria: (1) age (early, middle, and late adolescence); (2) facial height ratio or Jarabak quotient (hyperdivergent, normodivergent, and hypodivergent); and (3) ANB classification (Class I, Class II, and Class III). Temporomandibular joint space (TMJS: AS, anterior space; SS, superior space; PS, posterior space; MS, medial space; LS, lateral space), width and depth of the condyle (MLT, mediolateral thickness; APT, anteroposterior thickness), articular slope (ArS) and vertical height of the fossa (VHF) were measured and compared using CBCT. Results: Differences in condyle-fossa relationships were not significantly different between male and female adolescents, but were significantly different (P &lt; .05) between left and right sides. The mean values showed no statistical differences according to age and skeletal pattern. Most measurements in the sagittal view showed that SS was the greatest, and the mean ratio of AS to SS to PS was 1.00 to 1.27 to 1.19, respectively. The mean values of coronal MS and LS were not significantly different. Conclusions: There were almost no statistical differences in the TMJS in adolescents across various factors except between left and right sides.

Evaluation of the Posterior Superior Alveolar Artery Prior to Sinus Floor Elevation via Lateral Window Technique: A Cone-Beam Computed Tomography Study

2020 ◽  
Vol 11 (2) ◽  
pp. 215-223
Author(s):  
Elçin Bedelog˘lu ◽  
Mustafa Yalçın
Keyword(s):  
Computed Tomography ◽  
Maxillary Sinus ◽  
Cone Beam Computed Tomography ◽  
Lateral Wall ◽  
Cone Beam ◽  
Sinus Floor Elevation ◽  
Mean Values ◽  
Detection Point ◽  
Sinus Floor ◽  
The Mean

Aim: To evaluate the prevalence, diameter, localization of the posterior superior alveolar artery (PSAA) and the relationship between PSAA and the floor of the maxillary sinus and the thickness of the maxillary sinus lateral wall using cone-beam computed tomography (CBCT). Material and Methods: In this retrospective study, more than 500 CBCT images were retrieved. Out of them 156 CBCT images were related to the sinus floor elevation, among which 120 CBCT images were enrolled in the study based on the inclusion criteria, and 36 CBCT images were excluded. A total of 120 CBCT images of the PSSA from 60 patients comprising 32 (53.3%) men and 28 (46.7%) women were analyzed. Statistical data were analyzed using SPSS for Windows version 22. Descriptive statistics (mean, standard deviation, frequency) were used for the analyses. Results: The ages of the participants ranged between 26 and 76 years and the mean age was 54.48 ± 10.92 years. The PSAA was detected on the right side in 95% of the CBCT scans and on the left side in 85% of the maxillary sinuses. At the first detection point (FDP) and last detection point (LDP), the mean values of the distance between the inferior border of the PSAA and the floor of the maxillary sinus were 9.54 ± 4.27 mm and 7.91 ± 4.75 mm, respectively. The mean diameters of the PSAA at the FDP and LDP were 1.36 ± 0.46 mm and 1.12 ± 0.35 mm, respectively. Conclusion: Detection of the characteristics of the PSAA by using CBCT is crucial for handling the sinus floor elevation procedures uneventfully.

Sign in / Sign up

Export Citation Format

Share Document