Evaluation of condyle-fossa relationships in adolescents with various skeletal patterns using cone-beam computed tomography

ABSTRACT Objectives: To evaluate the condyle-fossa relationship in adolescents with various skeletal patterns using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images obtained in 120 adolescent patients were used for this study. The patients were divided into 3 groups according to 3 criteria: (1) age (early, middle, and late adolescence); (2) facial height ratio or Jarabak quotient (hyperdivergent, normodivergent, and hypodivergent); and (3) ANB classification (Class I, Class II, and Class III). Temporomandibular joint space (TMJS: AS, anterior space; SS, superior space; PS, posterior space; MS, medial space; LS, lateral space), width and depth of the condyle (MLT, mediolateral thickness; APT, anteroposterior thickness), articular slope (ArS) and vertical height of the fossa (VHF) were measured and compared using CBCT. Results: Differences in condyle-fossa relationships were not significantly different between male and female adolescents, but were significantly different (P < .05) between left and right sides. The mean values showed no statistical differences according to age and skeletal pattern. Most measurements in the sagittal view showed that SS was the greatest, and the mean ratio of AS to SS to PS was 1.00 to 1.27 to 1.19, respectively. The mean values of coronal MS and LS were not significantly different. Conclusions: There were almost no statistical differences in the TMJS in adolescents across various factors except between left and right sides.

Download Full-text

Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

BMC Oral Health ◽

10.1186/s12903-020-01322-0 ◽

2021 ◽

Vol 21 (1) ◽

Author(s):

P. López-Jarana ◽

C. M. Díaz-Castro ◽

A. Falcão ◽

C. Falcão ◽

J. V. Ríos-Santos ◽

...

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Cone Beam ◽

Bone Thickness ◽

Height Difference ◽

Mean Values ◽

The Mean ◽

Maxilla And Mandible ◽

Palatal Bone ◽

Two Parameters

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

Download Full-text

Articular Eminence Inclination, Height, and Condyle Morphology on Cone Beam Computed Tomography

The Scientific World JOURNAL ◽

10.1155/2014/761714 ◽

2014 ◽

Vol 2014 ◽

pp. 1-6 ◽

Cited By ~ 24

Author(s):

Dilhan İlgüy ◽

Mehmet İlgüy ◽

Erdoğan Fişekçioğlu ◽

Semanur Dölekoğlu ◽

Nilüfer Ersan

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Mean Value ◽

Cone Beam ◽

Articular Eminence ◽

Age And Gender ◽

Mean Values ◽

The Mean ◽

And Gender ◽

The Relationship

Aim. The aim of the present study was to examine the relationship between articular eminence inclination, height, and thickness of the roof of the glenoid fossa (RGF) according to age and gender and to assess condyle morphology including incidental findings of osseous characteristics associated with osteoarthritis (OA) of the temporomandibular joint (TMJ) using cone beam computed tomography (CBCT).Materials and Methods. CBCT images of 105 patients were evaluated retrospectively. For articular eminence inclination and height, axial views on which the condylar processes were seen with their widest mediolateral extent being used as a reference view for secondary reconstruction. Condyle morphology was categorized both in the sagittal and coronal plane.Results. The mean values of eminence inclination and height of males were higher than those of females (P<0.05). There were significant differences in the RGF thickness in relation to sagittal condyle morphology. Among the group of OA, the mean value of the RGF thickness for “OA-osteophyte” group was the highest (1.59 mm), whereas the lowest RGF values were seen in the “OA-flattening.”Conclusion. The sagittal osteoarthritic changes may have an effect on RGF thickness by mechanical stimulation and changed stress distribution. Gender has a significant effect on eminence height (Eh) and inclination.

Download Full-text

Custom Focal Trough in Cone-Beam Computed Tomography Reformatted Panoramic Versus Digital Panoramic for Mental Foramen Position to Aid Implant Planning

Journal of Clinical Imaging Science ◽

10.25259/jcis_150_2019 ◽

2020 ◽

Vol 10 ◽

pp. 34

Author(s):

Khaled Beshtawi ◽

Emad Qirresh ◽

Mohamed Parker ◽

Shoayeb Shaik

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Mental Foramen ◽

Reference Points ◽

Cone Beam ◽

Vertical Position ◽

Linear Measurements ◽

Mean Values ◽

The Mean ◽

High Level

Objectives: To compare the linear measurements from digital panoramic (DP) radiographs and cone-beam computed tomography (CBCT) volumes for the localization of the mental foramen (MF). Material and Methods: Thirty-one patients with panoramic and CBCT radiographs depicted on the same machine were analyzed. The vertical and horizontal positions of the MF were compared by the differences in distances measured from reference points to the boundaries (tangents) of the MF in digital panoramic (DP) and CBCT reformatted panoramic (CRP) views. The vertical position of MF was also analyzed on CBCT oblique coronal views (CORO) and compared with its corresponding distances on DP and CRP views. Results: Statistically significant differences (P < 0.05) were found in all compared measurements between CRP and DP views. In addition, the vertical distance (Y1) compared between DP, CRP, and CORO views also showed a statistically significant measurement discrepancy in the mean distance (P < 0.000) with the highest mean difference of 1.59 mm (P < 0.05) was attained from Y1 (DP-CORO). Inter- and intra-examiner analysis indicated a high level of agreement for all measurements. Conclusion: The mean values of discrepancies in measurements between DP and CRP views for horizontal and vertical linear measurements were clinically tolerable. Nevertheless, significant differences in the vertical MF position were detected between the panoramic views (DP, CRP) and the coronal views (CORO). This implies that the use of coronal view measurements during implant planning might reduce the risk of neurovascular injuries.

Download Full-text

Second Root Canal in Mandibular Incisors: an Ex Vivo Cone-Beam Computed Tomography (CBCT) Study

Balkan Journal of Dental Medicine ◽

10.2478/bjdm-2018-0007 ◽

2018 ◽

Vol 22 (1) ◽

pp. 38-42

Author(s):

Maria Elpida Kalaitzoglou ◽

Eleni Kantilieraki ◽

Charalampos Beltes ◽

Christos Angelopoulos ◽

Panagiotis Beltes

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Root Canal ◽

Ex Vivo ◽

Cone Beam ◽

Mean Values ◽

Root Canals ◽

The Mean ◽

Type 3 ◽

Mandibular Incisors

SummaryBackground/Aim: To analyze the internal morphology of mandibular incisors with two root canals using cone-beam computed tomography (CBCT). Material and Methods: 289 (143 central and 146 lateral) extracted intact mandibular incisors were radiographed for detection of a second root canal. The teeth presenting a second root canal were imaged with CBCT and evaluated regarding: root canal type, the distance of the cementoenamel junction (CEJ) to the bifurcation of the canals and the distance of the canal fusion to the apical foramen (in teeth in which canals rejoined). Results: Out of 143 central and 146 lateral mandibular incisors, 41 (28.7%) and 44 (30.1%) teeth respectively showed a second root canal. Types II, III, V and an additional type to Vertucci’s classification were identified. Type III was the most prevalent and presented in 30 (73.2%) central and 34 (77.3%) lateral mandibular incisors with two root canals. The mean values of the distance of the CEJ to the canal bifurcation were 4.2 mm and 4.0 mm for central and lateral mandibular incisors respectively. The mean values of the distance of the canal fusion to the apical foramen 5.5 mm and 5.1 mm for central and lateral mandibular incisors respectively. Conclusions: Mandibular incisors with two root canals mainly present with Vertucci’s Type 3 canal configuration. The canal bifurcation was identified mostly at the coronal and middle thirds of the root, while the canal fusion occurred in the middle third of the root.

Download Full-text

Evaluation of the Posterior Superior Alveolar Artery Prior to Sinus Floor Elevation via Lateral Window Technique: A Cone-Beam Computed Tomography Study

Journal of Advanced Oral Research ◽

10.1177/2320206820940463 ◽

2020 ◽

Vol 11 (2) ◽

pp. 215-223

Author(s):

Elçin Bedelog˘lu ◽

Mustafa Yalçın

Keyword(s):

Computed Tomography ◽

Maxillary Sinus ◽

Cone Beam Computed Tomography ◽

Lateral Wall ◽

Cone Beam ◽

Sinus Floor Elevation ◽

Mean Values ◽

Detection Point ◽

Sinus Floor ◽

The Mean

Aim: To evaluate the prevalence, diameter, localization of the posterior superior alveolar artery (PSAA) and the relationship between PSAA and the floor of the maxillary sinus and the thickness of the maxillary sinus lateral wall using cone-beam computed tomography (CBCT). Material and Methods: In this retrospective study, more than 500 CBCT images were retrieved. Out of them 156 CBCT images were related to the sinus floor elevation, among which 120 CBCT images were enrolled in the study based on the inclusion criteria, and 36 CBCT images were excluded. A total of 120 CBCT images of the PSSA from 60 patients comprising 32 (53.3%) men and 28 (46.7%) women were analyzed. Statistical data were analyzed using SPSS for Windows version 22. Descriptive statistics (mean, standard deviation, frequency) were used for the analyses. Results: The ages of the participants ranged between 26 and 76 years and the mean age was 54.48 ± 10.92 years. The PSAA was detected on the right side in 95% of the CBCT scans and on the left side in 85% of the maxillary sinuses. At the first detection point (FDP) and last detection point (LDP), the mean values of the distance between the inferior border of the PSAA and the floor of the maxillary sinus were 9.54 ± 4.27 mm and 7.91 ± 4.75 mm, respectively. The mean diameters of the PSAA at the FDP and LDP were 1.36 ± 0.46 mm and 1.12 ± 0.35 mm, respectively. Conclusion: Detection of the characteristics of the PSAA by using CBCT is crucial for handling the sinus floor elevation procedures uneventfully.

Download Full-text

Appraisal of the relationship between tooth inclination, dehiscence, fenestration, and sagittal skeletal pattern with cone beam computed tomography

The Angle Orthodontist ◽

10.2319/050818-344.1 ◽

2019 ◽

Vol 89 (4) ◽

pp. 544-551 ◽

Cited By ~ 1

Author(s):

İpek Coşkun ◽

Burçak Kaya

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Gingival Recession ◽

Class I ◽

Cone Beam ◽

Class Iii ◽

Chi Square ◽

Skeletal Pattern ◽

Tooth Inclination ◽

The Relationship

ABSTRACT Objectives: To examine the relationship between sagittal facial pattern and dehiscence/fenestration presence in conjunction with buccolingual tooth inclination by using cone beam computed tomography. Materials and Methods: The study was carried out on the cone beam computed tomography scans of the following three groups of patients (n = 20 in each group): Class I, Class II, Class III. Buccolingual tooth inclination, buccal dehiscence/fenestration presence, and lingual dehiscence/fenestration presence were evaluated on each tooth. Analysis of variance, Kruskall-Wallis H, Scheffe, and chi-square tests were used for statistical comparisons. Results: Differences (P < .05) were observed between the groups for inclination of upper incisors and all lower teeth except for second molars. Dehiscence prevalence in the upper buccal and posterior buccal regions was higher (P < .05) in the Class I group when compared with the other groups. Lower buccal and anterior buccal regions showed higher (P = .0001) dehiscence prevalence in all groups. No difference was observed in fenestration prevalence between the groups. The upper buccal and anterior buccal regions showed higher (P = .0001) fenestration prevalence in all groups. Conclusions: Orthodontists must consider concealed alveolar defects in treatment planning to avoid gingival recession or tooth mobility.

Download Full-text

Comparison of condylar size among different anteroposterior and vertical skeletal patterns using cone-beam computed tomography

The Angle Orthodontist ◽

10.2319/032518-229.1 ◽

2018 ◽

Vol 89 (2) ◽

pp. 306-311 ◽

Cited By ~ 2

Author(s):

Atsushi Hasebe ◽

Tetsutaro Yamaguchi ◽

Takatoshi Nakawaki ◽

Yu Hikita ◽

Koushu Katayama ◽

...

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Statistical Significance ◽

Analysis Of Covariance ◽

Class I ◽

Cone Beam ◽

Class Iii ◽

Composite Effect ◽

Mandibular Plane ◽

Left And Right

ABSTRACT Objectives: To compare condylar size among different anteroposterior and vertical skeletal patterns using cone-beam computed tomography (CBCT). Materials and Methods: The study included 166 subjects (61 men, mean age: 27.2 ± 7.6 years; 105 women, mean age: 27.4 ± 9.2 years). The anteroposterior skeletal patterns of the subjects were classified into Classes I (−1° ≤ A point–nasion–B point angle [ANB] < 4°), II (ANB ≥ 4°), and III (ANB < −1°). The vertical skeletal patterns were classified into hypodivergent (mandibular plane [MP] ≤ 23°), normodivergent (23° < MP < 30°), and hyperdivergent (MP ≥ 30°) groups. The condylar length, height, and width were examined using CBCT images. Analysis of covariance was used to compare three condylar size measurements among the three anteroposterior groups and the three vertical groups using sex as a covariate. Both left and right sides were examined. Nine groups were further divided according to the anteroposterior and vertical groups, and two-way analysis of covariance (ANCOVA) was applied to estimate the composite effect of skeletal patterns in both directions. Results: Sex as a covariate showed statistical significance in most examinations. The condylar height on both sides had statistically different anteroposterior skeletal patterns (P < .001). The condylar width on both sides also had statistically different vertical skeletal patterns (P < .001). After adjusting for sex, the condylar height and width on both sides increased from Class II, Class I, and Class III. The condylar width on both sides increased from the hypodivergent group, the normodivergent group, and the hyperdivergent group. No composite effect of skeletal patterns in both directions was observed. Conclusions: Condylar height and width considerably differed among subjects with different anteroposterior or vertical skeletal patterns. The anteroposterior or vertical skeletal patterns independently affected the condylar size.

Download Full-text

Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽

10.3390/diagnostics11030541 ◽

2021 ◽

Vol 11 (3) ◽

pp. 541

Author(s):

Xiao-Chuan Fan ◽

Lin-Sha Ma ◽

Li Chen ◽

Diwakar Singh ◽

Xiaohui Rausch-Fan ◽

...

Keyword(s):

Computed Tomography ◽

Temporomandibular Joint ◽

Cone Beam Computed Tomography ◽

Class Ii ◽

Class I ◽

Cone Beam ◽

Glenoid Fossa ◽

Linear Measurements ◽

Significant Difference ◽

Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

Download Full-text

Intraoperative cone beam computed tomography for detecting residual stones in percutaneous nephrolithotomy: a feasibility study

Urolithiasis ◽

10.1007/s00240-021-01259-1 ◽

2021 ◽

Author(s):

R. A. Kingma ◽

M. J. H. Voskamp ◽

B. H. J. Doornweerd ◽

I. J. de Jong ◽

S. Roemeling

Keyword(s):

Computed Tomography ◽

Percutaneous Nephrolithotomy ◽

Cone Beam Computed Tomography ◽

University Hospital ◽

Cone Beam ◽

Cross Sectional ◽

The Mean ◽

Residual Stones ◽

Residual Fragments

AbstractCone beam computed tomography (CBCT) provides multiplanar cross-sectional imaging and three-dimensional reconstructions and can be used intraoperatively in a hybrid operating room. In this study, we investigated the feasibility of using a CBCT-scanner for detecting residual stones during percutaneous nephrolithotomy (PCNL). Intraoperative CBCT-scans were made during PCNL procedures from November 2018 until March 2019 in a university hospital. At the point where the urologist would have otherwise ended the procedure, a CBCT-scan was made to image any residual fragments that could not be detected by either nephroscopy or conventional C-arm fluoroscopy. Residual fragments that were visualized on the CBCT-scan were attempted to be extracted additionally. To evaluate the effect of this additional extraction, each CBCT-scan was compared with a regular follow-up CT-scan that was made 4 weeks postoperatively. A total of 19 procedures were analyzed in this study. The mean duration of performing the CBCT-scan, including preparation and interpretation, was 8 min. Additional stone extraction, if applicable, had a mean duration of 11 min. The mean effective dose per CBCT-scan was 7.25 mSv. Additional extraction of residual fragments as imaged on the CBCT-scan occurred in nine procedures (47%). Of the follow-up CT-scans, 63% showed a stone-free status as compared to 47% of the intraoperative CBCT-scans. We conclude that the use of CBCT for the detection of residual stones in PCNL is meaningful, safe, and feasible.

Download Full-text