scholarly journals Cone Beam Computed Tomography Based Sex Estimation by Volume of Odontoid Process of The Second Cervical Vertebra

2021 ◽  
Vol 24 (3) ◽  
Author(s):  
André Luiz Ferreira Costa ◽  
Ana Amelia Barbieri ◽  
Bianca Costa Gonçalves ◽  
Camila Felisbino Silva ◽  
Celso Massahiro Ogawa ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Odontoid Process ◽  
Cervical Vertebra ◽  
Cone Beam ◽  
Computer Assisted ◽  
Sex Estimation ◽  
Significant Difference ◽  
Male Sex

Objective: The aim of this study was to evaluate whether the volume of odontoid process of the second cervical vertebra on CBCT images can be used for sex estimation. Material and Methods: The volume of odontoid process on CBCT images of 138 subjects was measured. In addition, the patients were classified into five age groups. The comparisons between the groups in relation to sex and age were performed by using Mann-Whitney’s test and Kruskal-Wallis’ test, respectively. The ROC curve was used to assess the sensitivity and specificity of the volume to determine the sex.  Results: No statistically significant difference was observed between age and volume. Males had significantly larger volumes than females. Values of volume equal to or greater than 1.254 mm3 have sensitivity of 68.2% and specificity of 68.1% to determine male sex.  Conclusion: The volume of the odontoid process tends to be larger in males than in females and can be used as sex estimation. KEYWORDS Cone beam computed tomography; Diagnostic imaging; Sex determination processes; Image processing; Computer-assisted.

scholarly journals Estimating the Entrance Surface Dose in the Eyes, Thyroid, and Parotid Gland Regions in Adult and Pediatric Groups: A Cone-Beam Computed Tomography Technique

2021 ◽  
Author(s):  
Reza Omidi ◽  
Fariba Farhadi Birgani ◽  
Ali Asghar Parach ◽  
Hamed Zamani ◽  
Saman Dalvand ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Parotid Gland ◽  
Cone Beam Computed Tomography ◽  
Pediatric Patients ◽  
Age Groups ◽  
Cone Beam ◽  
Surface Dose ◽  
Parotid Glands ◽  
Entrance Surface Dose ◽  
Significant Difference

Purpose: This study aimed to determine the Entrance Surface Dose (ESD) of sensitive organs in Cone-Beam Computed Tomography (CBCT) imaging of the maxillofacial region in the two age groups of adult and pediatric. Materials and Methods: In this work, the measurements were performed using Thermo Luminescent Dosimeters (TLD-GR200). The imaging was performed using a PROMAX 3D CBCT scanner for 30 adults and 20 pediatric patients. The ESD value for each patient in the region of eyes, thyroid, and parotid glands was measured by 15 TLDs during CBCT of maxillofacial. Results: The highest and lowest mean values of ESDs were related to the parotid and thyroid gland regions in adults, 4.77 ± 0.61 mGy and 0.37 ± 0.16 mGy, respectively. In addition, these values were obtained 2.97 ± 0.36 mGy and 0.35 ± 0.12 mGy in pediatric groups as the highest and lowest values in that order. The results showed that the ESD values of the parotid gland regions in maxilla and mandible examinations had a significant difference (P <0.05). In addition, there was a significant difference between the ESD values of the parotid gland regions among the adults and pediatric groups (P <0.05). Conclusion: According to the results, the ESD values in both age groups were higher in the parotid gland region during maxillofacial CBCT examinations. Therefore, it is recommended to set radiation parameters like mAs as low as possible for reducing the patient dose, especially pediatric patients due to the more sensitive organs.

scholarly journals Mandibular Canal Location and Cortical Bone Thickness in Males and Females of Different Age Groups: A Cone-beam Computed Tomography Study

2021 ◽  
Vol 9 (A) ◽  
pp. 1117-1122
Author(s):  
Sherif Shafik El-Bahnasy ◽  
Magdy Youakim ◽  
Mohamed Shamel ◽  
Hisham El Sheikh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Mandibular Canal ◽  
Cone Beam ◽  
Age Group ◽  
Bone Thickness ◽  
Significant Difference ◽  
Computed Tomography Scans ◽  
The Mean

AIM: The purpose of the study was to measure and compare the prevalence of mandibular canal (MC) location variations in regard to mandibular first molars in both genders at different age groups. METHODS: A retrospective study was performed on 80 cone-beam computed tomography scans. Distance between MC and apical apices of first molars, buccal and lingual cortical plates was measured in both sides. RESULTS: 80 scans with 160 sides were analyzed. Distances was measured bilaterally for all scans with mean (5.22 ± 0.77) in men versus (4.1 ± 0.7) in women at group age 31–40 apical to apices of first molars. The mean was (3.77 ± 0.62) in men versus (2.81 ± 0.47) in women at same age group at buccal side, lingually the mean was (4.02 ± 0.67) in men versus (3.67 ± 0.26) in women in the same age group. CONCLUSION: Our study showed that there were decrease in measurements in older age group in both genders and in female groups more than male groups but with no statistical significant difference.

scholarly journals Evaluation of Midpalatal Suture Ossification Using Cone-Beam Computed Tomography: A Digital Radiographic Study

2020 ◽  
Vol 63 (4) ◽  
pp. 188-193
Author(s):  
Girish Katti ◽  
Syed Shahbaz ◽  
Chandrika Katti ◽  
Mohd Sabyasachi Rahman
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Imaging Modality ◽  
Imaging Techniques ◽  
Age Groups ◽  
Cone Beam ◽  
Chi Square ◽  
Midpalatal Suture ◽  
Significant Difference ◽  
Mid Palatal Suture

Background: Cone beam computed tomography (CBCT) imaging techniques are the recent rage in the field of oral diagnostic imaging modality. It is noninvasive, faster and lacks anatomic superimposition. Earlier maxillary occlusal radiographs were used to assess and evaluate the mid palatal suture, but being a two dimensional imaging modality it could not assess the ossification process which takes place in multiple planes mostly due to curved nature of the palate. In this study we assessed the mid palatal suture morphology and classify them according to the variants using CBCT images. Materials and methods: A total of 200 CBCT scans (95 males and 105 females) were evaluated in the present study from the archives of an imaging center. As per Angelieri classification the midpalatal suture was classified into five categories (A–E) depending on the degree of ossification that had taken place. Statistical analysis was done by Chi Square test using SPSS version 23.0. Results: There is statistically significant difference present in the stages of maturity of mid palatal suture in various age groups with Stage B is most common in Group 1 (50%), Stage C most common in Group 2 (60%) and Group 3 (40%) and Stage E more common in Group 4 (50%). Conclusion: The results of the present study showed a wide variation in the initiation time and the degree of ossification and morphology of the midpalatal suture in different age groups. Although there was an increase in the closure of the suture with aging, age is not a reliable criterion for determining the open or closed nature of the suture. This finding is important in providing an idea as to how diverse is the ossification of maxillary sutures.

scholarly journals Evaluation of the Distance between the Mental Foramen and the Mandibular Edge: Cone Beam Computed Tomography Analysis in Turkish Population

2021 ◽  
Vol 25 (1) ◽  
pp. 53-57
Author(s):  
Ozkan Adiguzel ◽  
Suzan Cangul ◽  
Artemisa Adiguzel ◽  
Begum Erpacal ◽  
Zeki Akkus
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Turkish Population ◽  
Mental Foramen ◽  
Cone Beam ◽  
Imaging Method ◽  
Gender And Age ◽  
Significant Difference ◽  
Imaging Science

Summary Background/Aim: The aim of this study was to evaluate the distance between the mental foramen and the upper and lower edges of the mandible in the Turkish population according to different gender and age groups. Material and Methods: A total of 1756 samples of 878 patients who presented at the Dentomaxillofacial Radiology Department of the Dentistry Faculty of Dicle University were included in the study for evaluation of the distance between the mental foramen and the upper and lower edges of the mandible. The cone beam computed tomography (CBCT) images were taken using an I-CAT Vision device (Imaging Science International, Hatfield, USA). Multiple variance analysis was used in the statistical analyses of the data. Results: A statistically significant difference was identified between the genders in respect of the distance of the external edge of the mental foramen from the upper edge of the mandible (p=0,000). In the evaluations of the different age groups, no statistically significant difference was determined. A statistically significant difference was determined between the gender and age groups in respect of the distance of the mental foramen from the lower edge of the mandible (p=0,000). Conclusions: The distance of the mental foramen from the upper and lower edges of the mandible can show variations according to age and gender. Therefore, the use of CBCT as a 3-dimensional imaging method with a low radiation dose is recommended.

scholarly journals Radiological and Morphometric Features of Canalis Sinuosus in Russian Population: Cone-Beam Computed Tomography Study

2019 ◽  
Vol 2019 ◽  
pp. 1-5 ◽  
Author(s):  
Avanesov Anatoly ◽  
Yuri Sedov ◽  
Evgeniya Gvozdikova ◽  
Oleg Mordanov ◽  
Liudmila Kruchinina ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Russian Population ◽  
Cone Beam ◽  
Slice Thickness ◽  
Diagnostic Efficiency ◽  
Morphometric Features ◽  
Significant Difference ◽  
Canalis Sinuosus

Introduction. Cone-beam computed tomography (CBCT) is considered to be the most informative radiographic method for pre- and postoperative analysis of the maxillary anatomy and for avoiding further complication. Canalis sinuosus is one of such structures that damage can go along with bleeding and neurological symptomatology. The aim of the study was to investigate radiological and morphometric features of the canalis sinuosus in Russian population using CBCT technique. Materials and Methods. 150 CBCT scans of 61 males and 89 females aged from 24 to 80 years were retrospectively studied with different slice thickness and evaluated with regards to prevalence and diameter among age and gender groups in Russia. Results. CS prevalence in this study was 67%, and CS was most frequently presented in the lateral incisor region (33.5%). Women showed statistically higher CS prevalence (p<0.01) than the male group, and there was no statistically significant difference observed between occurrence and localization of CS and age groups. Conclusion. CBCT examination demonstrated good diagnostic efficiency in CS visualization, and the CS may have variations on its location and prevalence with statistically significant differences between the gender group and without significant differences among age groups and can depend on the population.

scholarly journals Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study

2017 ◽  
Vol 7 (1) ◽  
pp. 6 ◽  
Author(s):  
Ceren Aktuna Belgin ◽  
Ozkan Adiguzel ◽  
Marius Bud ◽  
Mehmet Colak ◽  
Zeki Akkus
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Cone Beam ◽  
Bone Thickness ◽  
Posterior Teeth ◽  
Second Molar ◽  
Significant Difference ◽  
Molar Teeth ◽  
The Difference

Aim: Buccal bone thickness is an important factor in implant treatment, bone health after tooth extraction, apical surgery, and esthetic outcomes. We evaluated the distance from the mandibular premolar and molar teeth apices to the buccal cortical bone in southeastern Anatolian people using cone-beam computed tomography (CBCT). Methodology: This retrospective study was performed in 461 posterior teeth (220 premolars, 241 molars) of 133 patients (62 females, 64 males) at Dicle University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology. Data were analyzed using Student’s t-tests and Tukey HSD tests. Results: The mandibular buccal bone was thicker in men than in women, but the difference was not statistically significant (p>0.05). The thinnest point of the mandibular buccal bone was measured in women as 2.431 mm and in men as 2.491 mm in the first premolar teeth. The thickest point of the mandibular bone was measured in women as 7.940 mm and in men as 7.859 mm in the distal roots of mandibular second molar teeth. For the mandibular first and second premolars, there was no significant difference in buccal bone thickness among the 10–29-, 30–49-, and 50–69-year age groups. The difference between the first and second molar mesial and distal roots of the age groups was significant at the level of buccal root thickness (p<0.05). Conclusions: It is important to examine buccal bone thickness (with CBCT) before surgical dental procedures for appropriate implant planning and surgical endodontic treatment.  How to cite this article: Aktuna Belgin C, Adiguzel O, Bud M, Colak M, Akkus Z. Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study. Int Dent Res 2017;7:6-12. Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Vertucci's Root Canal Configuration of 11376 Mandibular Anteriors and its Relationship with Distolingual Roots in Mandibular First Molars in A Cantonese Population: A Cone-Beam Computed Tomography Study

2021 ◽  
Author(s):  
Yeqing Yang ◽  
Chong Jiang ◽  
Ming Chen ◽  
Junkai Zeng ◽  
Buling Wu
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Statistical Significance ◽  
Age Groups ◽  
Cone Beam ◽  
Anterior Teeth ◽  
Significant Difference ◽  
Root Canal Morphology ◽  
Canal Morphology

Abstract Background: Cone-beam computed tomography (CBCT) was used to study the root canal system of mandibular anteriors (MAs) in a Cantonese population and to evaluate the correlation between the complicated root canal configurations of mandibular lateral incisors (MLIs) and the presence of distolingual roots (DLRs) in mandibular first molars (MFMs).Methods: A total of 11376 mandibular anterior teeth were scanned by CBCT. Those whose images met the inclusion criteria were first analysed according to Vertucci's root canal configuration and then grouped based on gender, age, and side, and their effects on root canal morphology were analysed. Finally, statistical analysis was used to evaluate the correlation between the complicated root canal configurations of MLIs and the existence of DLRs in MFMs. All statistical analyses were performed by using SPSS 21.0 software. Quantitative data are presented as the mean ± standard deviation. Student’s t tests were used to calculate statistical significance. P < 0.05 was considered statistically significant.Results: In MAs in the Cantonese population, all mandibular central incisors (MCIs) and MLIs had one root, and 0.37% of mandibular canines (MCs) had two roots. The most common Vertucci's root canal configuration was Vertucci I followed by Vertucci III. A total of 30.91% of MLIs and approximately 8% of MCIs and MCs have complicated root canal configurations. There were no significant differences in the prevalence of DLRs in MFMs and the incidence of complicated root canal configurations of MLIs between males and females or between the right and left teeth. However, a significant difference was found in different age groups of root canal configurations in MLIs. Moreover, significant ipsilateral and contralateral correlations between MFMs with DLRs and MLIs with complicated root canal configurations were observed on both sides.Conclusion: There is a correlation between the presence of DLRs in MFMs and complicated root canal morphology in MCIs in the Cantonese population.

scholarly journals Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 541
Author(s):  
Xiao-Chuan Fan ◽  
Lin-Sha Ma ◽  
Li Chen ◽  
Diwakar Singh ◽  
Xiaohui Rausch-Fan ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Linear Measurements ◽  
Significant Difference ◽  
Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

scholarly journals Knowledge Level of Iranian Dental Practitioners Towards Digital Radiography And Cone-Beam Computed Tomography

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Fatemeh Salemi ◽  
Abbas Shokri ◽  
Maryam Foroozandeh ◽  
Maryam Farhadian ◽  
Ayoub Yeganeh
Keyword(s):  
Computed Tomography ◽  
Radiation Dose ◽  
Digital Radiography ◽  
Cone Beam Computed Tomography ◽  
Work Experience ◽  
Further Education ◽  
Cone Beam ◽  
Knowledge Level ◽  
Dental Practitioners ◽  
Significant Difference

Objective: This study aimed to assess the knowledge level of Iranian dental practitioners about digital radiography(DR) andcone-beamcomputedtomography (CBCT). Material and Methods: In this crosssectional study, a researcher-designed questionnaire was administered among 180 general dentists and specialists. The questionnaire had three main domains of demographic information, fifteen questions about knowledge of DR (advantages, disadvantages, physical properties) and twenty six questions about knowledge of CBCT (indications, applications, advantages, route of knowledge acquisition). Data were analyzed using descriptive statistics, t-test and Pearson’s correlation coefficient. Results: Of 180 participants, 76 (42.2%) were females. The minimum, maximum and mean± standard deviation scores obtained in DR were 4, 14, and 9.031 ± 1.85 and in CBCT were 0,26 and 18.56 ± 4.81, respectively. In the CBCT domain, the participants had maximum knowledge about “low radiation dose” (72.8%) and minimum knowledge about the “role of CBCT in determination of bone density” (45%). In DR domain, the participants had maximum knowledge about “no need for radiographic films” (75.6%) and minimum knowledge about “not requiring manual processing” (15.6%). Overall, participants had higher level of knowledge about CBCT than DR. An inverse correlation was noted between age and work experience with the number of correct answers. However, no significant difference was noted in the knowledge level of males and females regarding CBCT or DR (p = 0.233 and p = 0.227, respectively). Conclusions: further education seem imperative for dentists in this respect for more efficient diagnosis and treatment planning, minimize patient radiation dose and save time and cost.   Keywords Digital radiography; Cone-Beam computed tomography; Knowledge; Dentists.

scholarly journals Comparison of the Hounsfield Unit Values Obtained From Cone-Beam Computed Tomography (CBCT) and Multidetector Computed Tomography (MDCT) Images for Different Bone Densities

2021 ◽  
Vol 7 (2) ◽  
Author(s):  
Atefeh Khavid ◽  
Mojgan Sametzadeh ◽  
Mostafa Godiny ◽  
Mohammad Mehdi Moarrefpour
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Pearson Correlation ◽  
Hounsfield Unit ◽  
Cone Beam ◽  
Ct Scanner ◽  
Significance Level ◽  
Dental Practitioners ◽  
Significant Difference ◽  
The Mean

Background and objective: In recent years, cone-beam computed tomography (CBCT) has become a key diagnostic tool in dentistry. CBCT can provide 3D images of the maxillofacial area to help dental practitioners in diagnosis and treatment, especially implant placement and treatment of pathogenic lesions. This study aimed to compare the Hounsfield Unit (HU) values obtained from CBCT images for bones of different densities with the corresponding HU values from MDCT images. Materials and methods: cube-shaped bone blocks of identical size were cut from the middle section of the cow ribs and femur area such that they had a layer of cortical bone in their buccal, lingual, and top surfaces and trabecular bone in the middle. MDCT scans were performed using a Somatom Sensation Ct Scanner. After determining HU from the results of these scans, nine suitable specimens from different ranges of HU were chosen for comparison. HU of the CBCT images was computed by the dedicated software of the CBCT machine. Finally, HU values obtained from MDCT and CBCT were compared. Data analysis was performed using SPSS version 25 at the 0.05 significance level. Results: The results showed a statistically significant difference between the mean HU from MDCT images and the mean HU from CBCT images (P<0.05). For similar specimens, CBCT produced higher mean HU values than MDCT. The Pearson correlation test detected a significant direct relationship between the HU values of specimens in MDCT and CBCT (P<0.05). Conclusion: For the tools and software used in this study, there was no significant difference between the HU values obtained from MDCT and CBCT, but the mean HU obtained from CBCT was higher than that from MDCT.

Sign in / Sign up

Export Citation Format

Share Document