scholarly journals A Quick Method for the Texture Mapping of Meshes Acquired by Laser Scanner

2012 ◽  
Vol 9 ◽  
pp. 17-26 ◽  
Author(s):  
Francesco Gabellone ◽  
Ivan Ferrari ◽  
Francesco Giuri
Keyword(s):  
Laser Scanner ◽  
Morphological Characteristics ◽  
Texture Mapping ◽  
Operational Effectiveness ◽  
Quick Method ◽  
Simple Method ◽  
Infra Red ◽  
Different Types ◽  
Infra Red Images ◽  
False Colour

The methodology described in this article was developed in connection with two different projects and entails texture mapping by time-of-flight laser scanner. In order to verify its operational effectiveness and applicability to other contexts, sites with extremely different morphological characteristics were studied. The basic rationale of this simple method derives from the need to obtain different types of mapping – including RGB real colour images, infra-red images, false colour images from georadar scans, etc. – from the same scanned surface. To resolve this problem, we felt that the most appropriate step was to obtain a UVW mapping based on the high resolution real colour images and then use the samecoordinates to rapidly map the false colour images as well. Thus we fitted a device to the camera to determine its trajectory (similar to a gunsight); when scanned by the laser scanner in the same context as the monument, it makes it possible to know the exact coordinates of the viewpoint.

Estimation of Kinetic Parameters of Heterotrophic Biomass under Aerobic Conditions and Characterization of Wastewater for Activated Sludge Modelling

1992 ◽  
Vol 25 (6) ◽  
pp. 125-139 ◽  
Author(s):  
J. Kappeler ◽  
W. Gujer
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Kinetic Parameters ◽  
Specific Growth ◽  
Wastewater Treatment Plants ◽  
Simple Method ◽  
Batch Tests ◽  
Different Types ◽  
Heterotrophic Biomass

To predict the behaviour of biological wastewater treatment plants, the Activated Sludge Model No. 1 is often used. For the application of this model kinetic parameters and wastewater composition must be known. A simple method to estimate kinetic parameters of heterotrophic biomass and COD wastewater fractions is presented. With three different types of batch-tests these parameters and fractions can be determined by measuring oxygen respiration. Our measurements showed that the maximum specific growth rate µmax of heterotrophic biomass depends on temperature, reactor configuration and SRT. In typical wastewater treatment plants of Switzerland the amount of readily biodegradable substrate was generally small (about 9 % of the COD in primary effluent). The same method can also be used to determine kinetic parameters of nitrifying biomass.

Bilateral open-door cervical expansive laminoplasty with hydroxyapatite spacers and titanium screws

2002 ◽  
Vol 96 (1) ◽  
pp. 22-28 ◽  
Author(s):  
Masakazu Takayasu ◽  
Teruhide Takagi ◽  
Toshihisa Nishizawa ◽  
Koji Osuka ◽  
Takehiko Nakajima ◽  
...  
Keyword(s):  
Screw Fixation ◽  
Cervical Spinal Cord ◽  
Intraoperative Complications ◽  
Fixation Strength ◽  
Open Door ◽  
Quick Method ◽  
Simple Method ◽  
Content Type ◽  
Titanium Screws ◽  
Fine Print

Object. The authors report a simple method for bilateral open-door cervical expansive laminoplasty in which hydroxyapatite (HA) spacers are secured by titanium screws. A biomechanical study was also conducted to confirm the strength of the screw fixation. Methods. A unilateral posterior approach was used to allow preservation of the posterior supporting elements (the posterior tension band) until the laminae were cut at the base. A bilateral open-door expansive laminotomy was then performed in standard fashion. Appropriate-sized HA spacers were selected, held with a specially designed holder, and placed between the split laminae. The screw holes were made in the laminae along the direction of the screw holes in the spacer, and two screws were inserted ventrolaterally to the laminae, resulting in instantaneous fixation. This procedure was performed in 15 patients; clinical results were successful, and there were no significant intraoperative complications. Follow-up radiological studies revealed no evidence of displacement of the spacers or screw backout. The screw artifacts observed on magnetic resonance imaging were minimal, allowing evaluation of the cervical spinal cord. The sagittal alignment of the cervical spine was well preserved. In the biomechanical studies the authors found that the screw fixation was of satisfactory strength, compared with other methods of fixation. Conclusions. Bilateral open-door cervical expansive laminoplasty in which HA spacers are secured by titanium screws is a simple and quick method that yields sufficient fixation strength.

Mapping and monitoring intertidal benthic habitats: a review of techniques and a proposal for a new visual methodology for the European coasts

2009 ◽  
Vol 33 (3) ◽  
pp. 378-402 ◽  
Author(s):  
Laurent Godet ◽  
Jérôme Fournier ◽  
Nicolas Toupoint ◽  
Frédéric Olivier
Keyword(s):  
Environmental Changes ◽  
Coastal Zones ◽  
Quick Method ◽  
Simple Method ◽  
Long Term Monitoring ◽  
Intertidal Habitats ◽  
Global Environmental Changes ◽  
Remote Sensing Methods ◽  
Term Monitoring

Mapping seafloors is a fundamental step for managing and preserving coastal zones. Moreover, in a context of current global environmental changes, new methods allowing long-term monitoring are increasingly required. Various methods have been used to map seafloors, primarily benthic macrofauna and sediment sampling along regular grids or transects, and remote sensing methods. These methods map very different things, do not have the same accuracy levels, and have different costs in time and money. Furthermore, such methods often require the competencies of highly skilled scientists and exclude non-specialists otherwise best placed to perform them. In this paper, we test a method based on Direct Field Observations (‘DFO method’), which can be used by non-specialists, and assess if it is sufficient for mapping and monitoring intertidal habitats. We further compare this method with other conventional ones. The results show that such a simple method is relatively rapid and inexpensive given the results obtained. Moreover, it is particularly suitable for highly fragmented intertidal landscapes where other methods are often very limited. In consequence, in areas such as the European coasts, it can be used by non-specialists, such as protected-area managers, and because it is an inexpensive and quick method long-term monitoring is also possible.

scholarly journals TERRESTRIAL LASER SCANNERS SELF-CALIBRATION STUDY: DATUM CONSTRAINTS ANALYSES FOR NETWORK CONFIGURATIONS

2015 ◽  
Vol XL-2/W4 ◽  
pp. 1-9 ◽  
Author(s):  
M. A. Abbas ◽  
H. Setan ◽  
Z. Majid ◽  
A. K. Chong ◽  
L. Chong Luh ◽  
...  
Keyword(s):  
Laser Scanner ◽  
Network Configuration ◽  
Calibration Technique ◽  
Self Calibration ◽  
Laser Scanners ◽  
Different Types ◽  
Minimum Number ◽  
Calibration Study ◽  
Different Sources ◽  
Selection Of

Similar to other electronic instruments, terrestrial laser scanner (TLS) can also inherent with various systematic errors coming from different sources. Self-calibration technique is a method available to investigate these errors for TLS which were adopted from photogrammetry technique. According to the photogrammetry principle, the selection of datum constraints can cause different types of parameter correlations. However, the network configuration applied by TLS and photogrammetry calibrations are quite different, thus, this study has investigated the significant of photogrammetry datum constraints principle in TLS self-calibration. To ensure that the assessment is thorough, the datum constraints analyses were carried out using three variant network configurations: 1) minimum number of scan stations; 2) minimum number of surfaces for targets distribution; and 3) minimum number of point targets. Based on graphical and statistical, the analyses of datum constraints selection indicated that the parameter correlations obtained are significantly similar. In addition, the analysis has demonstrated that network configuration is a very crucial factor to reduce the correlation between the calculated parameters.

scholarly journals On the diversity of the SE Indo-Pacific species ofTerebellides(Annelida; Trichobranchidae), with the description of a new species

PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e2313 ◽  
Author(s):  
Julio Parapar ◽  
Juan Moreira ◽  
Daniel Martin
Keyword(s):  
New Species ◽  
Morphological Characteristics ◽  
Relative Length ◽  
Andaman Sea ◽  
Species Discrimination ◽  
Pacific Waters ◽  
Routine Monitoring ◽  
Different Types ◽  
Pacific Species ◽  
A New Species

The study of material collected during routine monitoring surveys dealing with oil extraction and aquaculture in waters off Myanmar (North Andaman Sea) and in the Gulf of Thailand, respectively, allowed us to analyse the taxonomy and diversity of the polychaete genusTerebellides(Annelida). Three species were found, namelyTerebellidescf.woolawa,Terebellides hutchingsaespec. nov.(a new species fully described and illustrated), andTerebellidessp. (likely a new species, but with only one available specimen). The new species is characterised by the combination of some branchial (number, fusion and relative length of lobes and papillation of lamellae), and thoracic (lateral lobes and relative length of notopodia) characters and is compared with all species described or reported in the SW Indo-Pacific area, as well as with those sharing similar morphological characteristics all around the world. The taxonomic relevance of the relative length of branchial lobes and different types of ciliature in branchial lamellae for species discrimination in the genus is discussed. A key to allTerebellidesspecies described in SE Indo-Pacific waters is presented.

scholarly journals Terrestrial Laser Scanning and Settled Techniques: A Support to Detect Pathologies and Safety Conditions of Timber Structures

2013 ◽  
Vol 778 ◽  
pp. 350-357 ◽  
Author(s):  
Clara Bertolini-Cestari ◽  
Filiberto Chiabrando ◽  
Stefano Invernizzi ◽  
Tanja Marzi ◽  
Antonia Spanò
Keyword(s):  
Laser Scanning ◽  
Planning Process ◽  
Laser Scanner ◽  
Texture Mapping ◽  
Surface Model ◽  
Resolution Model ◽  
Close Range ◽  
High Resolution Model ◽  
Increasing Demand ◽  
Non Destructive

Nowadays, there is an increasing demand for detailed geometrical representation of the existing cultural heritage, in particular to improve the comprehension of interactions between different phenomena and to allow a better decisional and planning process. The LiDAR technology (Light Detection and Ranging) can be adopted in different fields, ranging from aerial applications to mobile and terrestrial mapping systems. One of the main target of this study is to propose an integration of innovative and settled inquiring techniques, ranging from the reading of the technological system, to non-destructive tools for diagnosis and 3D metric modeling of buildings heritage. Many inquiring techniques, including Terrestrial Laser Scanner (TLS) method, have been exploited to study the main room of the Valentino Castle in Torino. The so-called “Salone delle Feste”, conceived in the XVIIth century under the guidance of Carlo di Castellamonte, has been selected as a test area. The beautiful frescos and stuccoes of the domical vault are sustained by a typical Delorme carpentry, whose span is among the largest of their kind. The dome suffered from degradation during the years, and a series of interventions were put into place. A survey has revealed that the suspender cables above the vault in the region close to the abutments have lost their tension. This may indicate an increase of the vault deformation; therefore a structural assessment of the dome is mandatory. The high detailed metric survey, carried out with integrated laser scanning and digital close range photogrammetry, reinforced the structural hypothesis of damages and revealed the deformation effects. In addition, the correlation between the survey-model of the intrados and of the extrados allowed a non-destructive and extensive determination of the dome thickness. The photogram-metrical survey of frescos, with the re-projection of images on vault surface model (texture mapping), is purposed to exactly localize formers restoration and their signs on frescos continuity. The present paper illustrates the generation of the 3D high-resolution model and its relations with the results of the structural survey; both of them support the Finite Element numerical simulation of the dome.

scholarly journals Diversity of Phytophthora Communities across Different Types of Mediterranean Vegetation in a Nature Reserve Area

Forests ◽  
2020 ◽  
Vol 11 (8) ◽  
pp. 853
Author(s):  
Mario Riolo ◽  
Francesco Aloi ◽  
Federico La Spada ◽  
Saverio Sciandrello ◽  
Salvatore Moricca ◽  
...  
Keyword(s):  
Vegetation Type ◽  
Morphological Characteristics ◽  
Natura 2000 ◽  
Physicochemical Characteristics ◽  
Phytophthora Species ◽  
Nerium Oleander ◽  
Specific Objective ◽  
Different Types ◽  
Terrestrial Habitats ◽  
Sarcopoterium Spinosum

Research Highlights: Protected natural areas are a reservoir of Phytophthora species and represent the most suitable sites to study their ecology, being less disturbed by human activities than other environments. Background and Objectives: The specific objective of this study was to correlate the diversity and distribution of Phytophthora species with the vegetation in aquatic, riparian and terrestrial habitats within a protected area in Eastern Sicily, Southern Italy. Materials and Methods: Environmental samples (water and soil) were sourced from two streams running through the reserve and six different types of vegetation, including Platano-Salicetum pedicellatae, the Sarcopoterium spinosum community, Myrto communis-Pistacietum lentisci, Pistacio-Quercetum ilicis,Oleo-Quercetum virgilianae and a gallery forest dominated by Nerium oleander (Natura 2000 classification of habitats). Phytophthora species were recovered from samples using leaf baiting and were classified on the basis of morphological characteristics and sequencing of internal transcribed spacer (ITS) regions of ribosomal DNA (rDNA). Results: As many as 11 Phytophthora species, within five different ITS clades, were identified, including P. asparagi, P. bilorbang, P. cryptogea, P. gonapodyides, P. lacustris, P. multivora, P. nicotianae, P. oleae, P. parvispora, P. plurivora and P. syringae. No Phytophthora species were found in the Sarcopoterium spinosum comm. Phytophthora asparagi, P. lacustris and P. plurivora were the prevalent species in the other five plant communities, but only P. plurivora was present in all of them. Overall aquatic species from clade 6 (100 out of 228 isolates) were the most common; they were recovered from all five types of vegetation, streams and riparian habitats. Phytophthora populations found in the Platano-Salicetum pedicellatae and Oleo-Quercetum virgilianae show the highest diversity, while no correlation was found with the physicochemical characteristics of the soil. Conclusions: The vegetation type and the aquatic or terrestrial habitat were identified as major environmental factors correlated with the diversity of Phytophthora communities in this reserve.

Sign in / Sign up

Export Citation Format

Share Document