“A Wonderful Horrid Thing”

Author(s):  
A. Robin Hoffman

A. Robin Hoffman considers the sinister books designed by Edward Gorey (many of which she claims were intended for a young audience) in relation to influences such as Hoffman’s Struwwelpeter and Dickens’s The Old Curiosity Shop andBleak House. Hoffman argues that Gorey, by appropriating and reconceptualizing these texts’ modes of representation, manages to provide an “anaesthetizing historical distance” between his modern readers and the representations of childhood death popular among Victorian audiences. Through a careful examination of his books’ production methods, concentrating on their calculated appeal toward younger audiences, as well as his insistence on presenting childhood death as a subject of dark comedy, Hoffman asserts that what Gorey produces is at once an homage to Dickens’s work and a perversion of Dickens’s sentimentalized stories, mainly because of Gorey’s more unequivocal representations of violence and his eradication of Christian symbolism that offered the promise of moral redemption in favor of a critique of mid-twentieth-century American representations of childhood. In the end, Hoffman recognizes Gorey’s disruptive potential as he offers up, for both child and adult readers, a novel representation of childhood death, one that disempowers the mythologizing of textual children’s demises as a means of conveying a particular social, philosophical, or political agenda. She also suggests that Gorey’s portrayals of childhood death in his books serve as both a precursor to and an influence on the modern turn toward the comic gothic in many children’s and young adult horror texts. In doing so, she provides us with a useful model for thinking about the methods of portraying and thinking about death and violence against children within the space of horror novels, films, or television shows targeted toward young audiences.

T oung Pao ◽  
2017 ◽  
Vol 103 (1-3) ◽  
pp. 1-32 ◽  
Author(s):  
Kin Sum (Sammy) Li

After annexing his opponent states, the Qin First Emperor in 221 bce issued an edict to regulate the measurement system of lengths, volumes, and weights throughout the empire. This edict was inscribed on a great number of metal objects to be used as prototypes or standards for the measurement system. How the molds for the weights and crucibles of metal were prepared are essential questions regarding the production of these standards. By examining the weights and tracing the history of their industrial production, this article focuses on studying their material features, which enable us to understand the operation of the Qin foundries that produced them and their relationships with the government. It is hypothesized that the weights were produced at multiple local workshops rather than in a centrally administered factory, but that the foundries’ production methods were determined by the government’s political agenda to communicate its regulation policy to its subordinates. In addition, the study explores the Qin industrial organization and how the maintenance and large-scale distribution of the standardized weights reflected the policy implementation of the Qin empire.
Après avoir annexé les Etats qui s’opposaient encore à lui, le premier empereur des Qin promulgua en 221 avant notre ère un édit qui fixait les systèmes de mesure pour les longueurs, volumes et poids dans tout l’empire. Cet édit fut gravé sur un grand nombre d’objets métalliques devant servir de prototypes ou d’étalon. L’une des questions essentielles que pose la production de ces poids-étalons est la façon dont étaient préparés les moules pour façonner les poids et les creusets où était fondu le métal. En examinant les poids-étalons qui ont subsisté et en retraçant l’histoire de leur production industrielle, cet article concentre l’attention sur leur matérialité, ce qui nous permet de comprendre le fonctionnement des fonderies des Qin qui les ont produites, et leurs rapports avec le gouvernement. Il avance l’hypothèse que les poids furent produits dans de nombreux ateliers locaux plutôt que dans une fonderie centrale administrée par l’Etat, mais que les méthodes de production mises en œuvre par ces ateliers étaient déterminées par le gouvernement, qui avait pour objectif de faire systématiquement connaître et appliquer ses règlementations à ses subordonnés. De plus, cet article explore l’organisation industrielle des Qin et la façon dont l’entretien et la distribution à grande échelle des poids standardisés reflètent plus largement les méthodes de mise en œuvre des politiques décidées par l’Etat impérial des Qin.



Author(s):  
L. A. Bendersky ◽  
W. J. Boettinger

Rapid solidification produces a wide variety of sub-micron scale microstructure. Generally, the microstructure depends on the imposed melt undercooling and heat extraction rate. The microstructure can vary strongly not only due to processing parameters changes but also during the process itself, as a result of recalescence. Hence, careful examination of different locations in rapidly solidified products should be performed. Additionally, post-solidification solid-state reactions can alter the microstructure.The objective of the present work is to demonstrate the strong microstructural changes in different regions of melt-spun ribbon for three different alloys. The locations of the analyzed structures were near the wheel side (W) and near the center (C) of the ribbons. The TEM specimens were prepared by selective electropolishing or ion milling.


Author(s):  
Jun Liu ◽  
Mehmet Sarikaya ◽  
Ilhan A. Aksay

Ultrafine particles usually have unique physical properties. This study illustrates how the lattice defects and interfacial structures between particles are related to the size of ultrafine crystalline gold particles.Colloidal gold particles were produced by reducing gold chloride with sodium citrate at 100°C. In this process, particle size can be controlled by changing the concentration of the reactant. TEM samples are prepared by transferring a small amount of solution onto a thin (5 nm) carbon film which is suspended on a copper grid. In this work, all experiments were performed with Philips 430T at 300 kV.With controlled seeded growth, particles of different sizes are produced, as shown in Figure 1. By a careful examination, it can be resolved that very small particles have lattice defects with complex interfaces. Some typical particle structures include multiple twins, resulting in a five-fold symmetry bicrystals, and highly disordered regions. Many particles are too complex to be described by simple models.


Author(s):  
Charles Ellis ◽  
Molly Jacobs

Health disparities have once again moved to the forefront of America's consciousness with the recent significant observation of dramatically higher death rates among African Americans with COVID-19 when compared to White Americans. Health disparities have a long history in the United States, yet little consideration has been given to their impact on the clinical outcomes in the rehabilitative health professions such as speech-language pathology/audiology (SLP/A). Consequently, it is unclear how the absence of a careful examination of health disparities in fields like SLP/A impacts the clinical outcomes desired or achieved. The purpose of this tutorial is to examine the issue of health disparities in relationship to SLP/A. This tutorial includes operational definitions related to health disparities and a review of the social determinants of health that are the underlying cause of such disparities. The tutorial concludes with a discussion of potential directions for the study of health disparities in SLP/A to identify strategies to close the disparity gap in health-related outcomes that currently exists.


Author(s):  
Laramie D. Taylor

Research has shown that thoughts about death influence sexual cognitions and some media choices. The present study tested the hypothesis that thoughts about death may affect individuals’ tendency to select or avoid entertainment media programming containing sexual material. In two experiments, thoughts about death (mortality salience [MS]) were manipulated before college undergraduates expressed interest in viewing television shows and movies with varying amounts of sexual content. In both studies, MS was associated with greater overall interest in sexual media content. Although terror management theory would indicate that sexual worldview should moderate this effect, this was not observed to be the case. In addition, MS was not found to affect interest in other types of highly engaging media content including violent and dramatic content. Limitations regarding generalizability are discussed. Results suggest that MS increases a preference for sexual media content, and that this occurs for individuals with diverse sexual values systems. This is discussed in terms of implications for terror management theory and cognitive models of media influence.


2013 ◽  
Vol 221 (2) ◽  
pp. 90-97 ◽  
Author(s):  
John L. Sherry

Millions in taxpayer and foundation euros and dollars have been spent building and testing educational video games, games for health, and serious games. What have been the fruits of this frenzy of activity? What educational video game has had the reach and impact of Sesame Street or Blues Clues television shows? By comparison, the Children’s Television Workshop (CTW) managed to get Sesame Street off the ground within a couple of years, writing the basic scientific literature on educational media design in the process. Not only is Sesame Street well known and proven, it laid the basis for every effective educational show to follow. This article explores the differences between the CTW scientific approach to educational media production and the mostly nonscientific approach consuming so many resources in the educational games, games for health, and serious games movements. Fundamental scientific questions that remain unanswered are outlined.


2014 ◽  
Author(s):  
Halina Krol ◽  
Grazyna Nowak-Starz ◽  
Bozena Zboina ◽  
Malgorzata Markowska ◽  
Tomasz Wojcik ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document