Mechanical Properties of High-Strength Lightweight Concrete

10.14359/1839 ◽  
1991 ◽  
Vol 88 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
High Strength

Lightweight Concrete Based on Gypseous Binding Materials, Modified with Microcrystalline Cellulose, and Cavitationly Processed Sawdust

2019 ◽  
Vol 945 ◽  
pp. 188-192 ◽  
Author(s):  
A.A. Pykin ◽  
E.Y. Gornostaeva ◽  
N.P. Lukutsova ◽  
J.S. Pykina
Keyword(s):  
Mechanical Properties ◽  
Microcrystalline Cellulose ◽  
Lightweight Concrete ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Water Soluble ◽  
Waste Wood ◽  
Matrix Microstructure ◽  
Calcium Sulfate Dihydrate ◽  
Reducing Substances

The physical and mechanical properties of lightweight constructional heat-insulating concrete (sawdust gypsum concrete) with high-strength gypsum binder, modified by food cotton microcrystalline cellulose and organic fillers of plant origin from the waste wood of coniferous and deciduous species in the form of cavitationly processed pine and birch sawdust have been studied. The dependence of the cavitation extraction time of water-soluble reducing substances (sugars) from sawdust on the strength of sawdust gypsum concrete is established. The changes in microstructure of the gypsum matrix, the mean density, bending tension strength and compression strength, the thermal conductivity coefficient of sawdust gypsum concrete on the basis of the cavitationly processed sawdust with the introduction of microcrystalline cellulose are analyzed. It is proven that microcrystalline cellulose compacts the space between the crystalline hydrates of calcium sulfate dihydrate in the gypsum matrix microstructure and improves the physical and mechanical properties of sawdust gypsum concrete.

Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete

2015 ◽  
Vol 49 (4) ◽  
pp. 1221-1233 ◽  
Author(s):  
Ming Kun Yew ◽  
Hilmi Bin Mahmud ◽  
Payam Shafigh ◽  
Bee Chin Ang ◽  
Ming Chian Yew
Keyword(s):  
Mechanical Properties ◽  
Oil Palm ◽  
Lightweight Concrete ◽  
High Strength ◽  
Palm Shell ◽  
Oil Palm Shell ◽  
Twisted Bundle

Mechanical Properties of Modified Polypropylene Coarse Fiber-Reinforced, High-Strength, Lightweight Concrete

2011 ◽  
Vol 374-377 ◽  
pp. 1499-1506
Author(s):  
Rong Hui Zhang ◽  
Jian Li
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Lightweight Concrete ◽  
Volume Fraction ◽  
High Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume

In this study, the effect of micro-expansion high strength grouting material (EGM) and Modified polypropylene coarse fiber (M-PP fiber) on the mechanical properties of lightweight concrete are investigated. The influence of EGM and M-PP fiber on compressive strength , flexural strength and drying shrinkage of concrete are researched, and flexural fracture toughness are calculated. Test results show that the effect of EGM and M-PP fiber volume fraction (Vf) on flexural strength and fracture toughness is extremely prominent, compressive strength is only slightly enhanced, and the rate of shrinkage is obviously decreased. It is observed that the shape of the descending branch of load-deflection and the ascending branch of shrinkage-age tends towards gently with the increase of Vf. And M-PP fiber reinforced lightweight aggregate concrete is more economical.

scholarly journals Effects of Low Volume Fraction of Polyvinyl Alcohol Fibers on the Mechanical Properties of Oil Palm Shell Lightweight Concrete

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Ming Kun Yew ◽  
Hilmi Bin Mahmud ◽  
Bee Chin Ang ◽  
Ming Chian Yew
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Polyvinyl Alcohol ◽  
Oil Palm ◽  
Lightweight Concrete ◽  
Volume Fraction ◽  
High Strength ◽  
Palm Shell ◽  
Oil Palm Shell ◽  
Low Volume

This paper presents the effects of low volume fraction(Vf)of polyvinyl alcohol (PVA) fibers on the mechanical properties of oil palm shell (OPS) high strength lightweight concrete mixtures. The slump, density, compressive strength, splitting tensile strength, flexural strength, and modulus of elasticity under various curing conditions have been measured and evaluated. The results indicate that an increase in PVA fibers decreases the workability of the concrete and decreases the density slightly. The 28-day compressive strength of oil palm shell fiber-reinforced concrete (OPSFRC) high strength lightweight concrete (HSLWC) subject to continuous moist curing was within the range of 43–49 MPa. The average modulus of elasticity (E) value is found to be 16.1 GPa for all mixes, which is higher than that reported in previous studies and is within the range of normal weight concrete. Hence, the findings of this study revealed that the PVA fibers can be used as an alternative material to enhance the properties of OPS HSLWC for building and construction applications.

scholarly journals PERFORMANCE OF HIGH STRENGTH LIGHTWEIGHT CONCRETE USING PALM WASTES

2018 ◽  
Vol 19 (2) ◽  
pp. 30-42
Author(s):  
Md. Nazmul Huda ◽  
Mohd Zamin Jumaat ◽  
A. B. M. Saiful Islam ◽  
Walid A. Al-Kutti
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Coarse Aggregate ◽  
Lightweight Concrete ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Palm Shell

The performance of high strength structural lightweight concrete (LWC) using the palm wastes, oil palm shell (OPS) as well as palm oil clinker (POC) has been reported. Existing literatures used either OPS or POC individually for production of LWC. Each concept has their own advantages-disadvantages. In this study, both OPS and POC have been put together as coarse aggregate on the way to see the improvement of mechanical properties of waste based LWC. To achieve this purpose, regular coarse aggregate has been fully replaced by OPS and POC in the concrete. This structural grade lightweight concrete is named as palm shell and clinker concrete (PSCC). Attempts have been made with the series of OPS and POC mixture aimed at identifying for better performance. The quantity of OPS and POC mix has been varied as 30%, 40%, 50%, 60% and 70%. Mechanical properties of PSCC like density, workability, compressive strength at different ages, flexural strength, splitting tensile strength as well as modulus of elasticity have been evaluated. It is revealed that the proposed PSCC has extensive potential in terms of high compressive strength and good material behavior to perform as a better LWC. The study could offer structural lightweight concrete of compressive strength up to 46 MPa that is 31% higher than the control mix. The usage of 50% OPS to 50% POC coarse aggregate by vol. in the concrete mix is found to be the optimum mix. Furthermore, simple correlations have been developed which can easily predict compressive strength, splitting tensile strength, flexural strength, modulus of elasticity and ultrasonic pulse velocity of lightweight concrete.

Sign in / Sign up

Export Citation Format

Share Document