The effect of agitation and evaporating time of a newly released universal adhesive on dentin bond strength

2021 ◽  
Vol 48 (3) ◽  
pp. 135-145
Author(s):  
Soo-Min Ahn ◽  
Jeong-Kil Park ◽  
Sung-Ae Son
Keyword(s):  
Bond Strength ◽  
Universal Adhesive

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

Effect of Different Protocols in Preconditioning With EDTA in Sclerotic Dentin and Enamel Before Universal Adhesives Applied in Self-etch Mode

2017 ◽  
Vol 42 (3) ◽  
pp. 284-296 ◽  
Author(s):  
EC Martini ◽  
SO Parreiras ◽  
MF Gutierrez ◽  
AD Loguercio ◽  
A Reis
Keyword(s):  
Bond Strength ◽  
Adhesive Systems ◽  
Microtensile Bond Strength ◽  
Universal Adhesive ◽  
Etching Pattern ◽  
Bonding Performance ◽  
Universal Adhesives ◽  
Microshear Bond Strength ◽  
Self Etch ◽  
Main Factor

SUMMARY Objectives: The aim of this study was to investigate the effect of different protocols of 17% ethylene diamine tetra-acetic acid (EDTA) conditioning on the etching pattern and immediate bond strength of universal adhesives to enamel and sclerotic dentin. Methods and Materials: Forty bovine teeth with sclerotic dentin and 20 human third molars were randomly divided into eight groups resulting from the combination of the main factors surface treatment (none, two-minute EDTA conditioning manual application, 30-second EDTA manual application, 30-second EDTA sonic application) and adhesives systems (Scotchbond Universal Adhesive [SBU] and Prime & Bond Elect [PBE]). Resin-dentin and enamel-dentin bond specimens were prepared and tested under the microtensile bond strength (μTBS) and microshear bond strength (μSBS) tests, respectively. The etching pattern produced on the unground enamel and the sclerotic dentin surfaces under the different protocols and adhesive systems was evaluated under scanning electron microscopy. Results: For enamel, only the main factor adhesive was significant (p<0.0001), with SBU showing the highest μSBS. In sclerotic dentin, the lowest mean was observed for the group without EDTA application and the highest mean in the group with EDTA application with the sonic device for 30 seconds. Regardless of the EDTA protocol, the highest means of μTBS were observed for SBU (p<0.05). Conclusions: EDTA conditioning improves the bonding performance of universal adhesives in the self-etch mode on sclerotic dentin, mainly when applied for 30 seconds with the aid of a sonic device. EDTA pretreatment also improves the retentive etching pattern of enamel, but it does not result in higher enamel bond strength.

scholarly journals Comparative study of the dentin bond strength of a new universal adhesive

2016 ◽  
Vol 35 (4) ◽  
pp. 606-612 ◽  
Author(s):  
Ji-Hyun JANG ◽  
Myoung Geun LEE ◽  
Sang Uk WOO ◽  
Chung Ok LEE ◽  
Jin-Kyu YI ◽  
...  
Keyword(s):  
Bond Strength ◽  
Comparative Study ◽  
Universal Adhesive

scholarly journals Effects of Universal Adhesive on Shear Bond Strength of Resin Cement to Zirconia Ceramic with Different Surface Treatments

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Zohreh Moradi ◽  
Farnoosh Akbari ◽  
Sara Valizadeh
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Resin Cement ◽  
Zirconia Ceramic ◽  
Single Bond ◽  
Universal Adhesive

Aim. This study aimed to assess shear bond strength (SBS) of resin cement to zirconia ceramic with different surface treatments by using Single Bond Universal. Methods. In this in vitro study, 50 zirconia discs (2 × 6 mm) were divided into 5 groups of (I) sandblasting with silica-coated alumina (CoJet)  + silane + Single Bond 2, (II) sandblasting with CoJet + Single Bond Universal, (III) sandblasting with alumina + Single Bond Universal, (IV) sandblasting with alumina + Z-Prime Plus, and (V) Single Bond Universal with no surface treatment. Resin cement was applied in plastic tubes (3 × 5 mm2), and after 10,000 thermal cycles, the SBS was measured by a universal testing machine. The mode of failure was determined under a stereomicroscope at × 40 magnification. Data were analyzed using one-way ANOVA. Results. The maximum (6.56 ± 4.29 MPa) and minimum (1.94 ± 1.96 MPa) SBS values were noted in groups III and I, respectively. Group III had the highest frequency of mixed failure (60%). Group V had the maximum frequency of adhesive failure (100%). Conclusion. Single Bond Universal + sandblasting with alumina or silica-coated alumina particles is an acceptable method to provide a strong SBS between resin cement and zirconia.

scholarly journals Shear Strength of Brackets Bonded with Universal Adhesive Containing 10-MDP after 20,000 Thermal Cycles

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Mariana Almeida Mello Proença ◽  
Karime Tavares Lima da Silva ◽  
Alisson Costa e Silva ◽  
Edilausson Moreno Carvalho ◽  
José Bauer ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Dental Enamel ◽  
Adhesive System ◽  
Test Machine ◽  
Adhesive Systems ◽  
Thermal Cycles ◽  
Universal Adhesive ◽  
Adhesive Remnant Index ◽  
One Way Anova

Objectives. The aim of this study was to evaluate the shear bond strength of metal brackets bonded with different universal adhesive systems containing 10-MDP and Transbond Plus Self Etching Primer after 20,000 thermal cycles. Materials and Methods. A total of 130 sound bovine teeth were used, which are divided into 5 groups (n = 26) according to the adhesive system used: All-Bond Universal (Bisco), Ambar Universal (FGM), Clearfil Universal Bond (Kuraray), Single Bond Universal (3M/ESPE), and Transbond Plus SEP (3M/ESPE) as control. The adhesives were applied for 20 seconds and bonded with a resin Transbond XT (3M/ESPE). After this, the teeth were submitted to 20,000 cycles at 5°C and 55°C. Afterwards, the shear bond strength test was performed in a universal test machine (Instron 3342). The adhesive remnant index (ARI) was evaluated under a stereomicroscope at 10x magnification and scanning electronic microscopy (SEM, Hitachi 3030). The shear bond strength data were submitted to One-Way ANOVA (α = 0.05) and the ARI to the Kruskal–Wallis test (α = 0.05). Results. Statistical analysis showed that the universal adhesive systems presented mean shear bond strength values similar to Transbond Plus SEP (p<0.05). The universal adhesive presented similar ARI values among them but differed from those of Transbond Plus SEP (p<0.001). Transbond Plus SEP presented a high ARI value when compared with the universal adhesive systems and high demineralization of enamel. Conclusions. The results show that universal adhesive systems may be used for bonding metal brackets if the orthodontist wants to maintain dental enamel health.

scholarly journals In Vitro Study on the Effect of a New Bioactive Desensitizer on Dentin Tubule Sealing and Bonding

2020 ◽  
Vol 11 (2) ◽  
pp. 38
Author(s):  
Minh N. Luong ◽  
Laurie Huang ◽  
Daniel C. N. Chan ◽  
Alireza Sadr
Keyword(s):  
Bond Strength ◽  
In Vitro Study ◽  
Vitro Study ◽  
Acid Pretreatment ◽  
Universal Adhesive ◽  
Cross Sectional ◽  
Before And After ◽  
Human Dentin ◽  
Microshear Bond Strength

Bioactive mineral-based dentin desensitizers that can quickly and effectively seal dentinal tubules and promote dentin mineralization are desired. This in vitro study evaluated a novel nanohydroxyapatite-based desensitizer, Predicta (PBD, Parkell), and its effect on bond strength of dental adhesives. Human dentin discs (2-mm thick) were subjected to 0.5 M EDTA to remove the smear layer and expose tubules, treated with PBD, and processed for surface and cross-sectional SEM examination before and after immersion in simulated body fluid (SBF) for four weeks (ISO 23317-2014). The effects of two dental desensitizers on the microshear bond strength of a universal adhesive and a two-step self-etch system were compared. SEM showed coverage and penetration of nanoparticles in wide tubules on the PBD-treated dentin at the baseline. After four weeks in SBF, untreated dentin showed amorphous mineral deposits while PBD-treated dentin disclosed a highly mineralized structure integrated with dentin. Desensitizers significantly reduced microshear bond strength test (MSBS) of adhesives by 15–20% on average, depending on the bonding protocol. In conclusion, PBD demonstrated effective immediate tubules sealing capability and promoted mineral crystal growth over dentin and into the tubules during SBF-storage. For bonding to desensitizer-treated dentin, a two-step self-etching adhesive or universal bond with phosphoric acid pretreatment are recommended.

scholarly journals Silane Effect of Universal Adhesive on the Composite–Composite Repair Bond Strength after Different Surface Pretreatments

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 950 ◽  
Author(s):  
Gioia Michelotti ◽  
Maria Niedzwiecki ◽  
Darius Bidjan ◽  
Phoebe Dieckmann ◽  
Shengjile Deari ◽  
...  
Keyword(s):  
Bond Strength ◽  
Silica Coating ◽  
Positive Control ◽  
Positive Control Group ◽  
Control Group ◽  
Universal Adhesive ◽  
Diamond Bur ◽  
Composite Substrates ◽  
The Impact ◽  
Mechanical Surface

This study investigated the impact of a separate silanization step on the repair bond strength of composite substrates using a universal adhesive after various mechanical surface treatments. Composite specimens were aged and exposed to the following mechanical roughening treatments: diamond bur abrasion, aluminum oxide sandblasting, or silica coating. The specimens were then either left untreated or conditioned with universal adhesive (Scotchbond Universal), or a silane coupling agent was applied before the use of the universal adhesive or a conventional adhesive (Optibond FL). The conditioned surfaces and fresh substrate (positive control group) were covered with repair composite, and microtensile bond strength testing was performed. The significantly highest bond strength was obtained in the positive control group. Repair bond strength of the universal adhesive applied after a separate silanization step was similar to that without prior silanization, independent of the mechanical surface treatment. Moreover, after silica coating, no significant differences in the repair bond strength were detected among the different adhesive treatments. In conclusion, a separate silanization step before surface conditioning with the universal adhesive does not enhance the repair bond strength. On silica-coated composite substrates, repair bond strength values of the universal adhesive were similar to those of the conventional adhesive.

Sign in / Sign up

Export Citation Format

Share Document