Evaluation of the programme for long-term operation for safety requirements during operational safety

2014 ◽  
Vol 8 (2) ◽  
pp. 146
Author(s):  
Wesam Z. Ibrahim ◽  
Hany Salam
Keyword(s):  
Term Operation ◽  
Safety Requirements ◽  
Operational Safety

scholarly journals Quality assurance program for Angra 1 licence renewal and long-term operation

2021 ◽  
Vol 9 (2B) ◽  
Author(s):  
YOUSSEF MORGHI ◽  
Amir Zacarias Mesquita ◽  
Ana Rosa BALIZA MAIA
Keyword(s):  
Quality Assurance ◽  
Nuclear Power ◽  
Nuclear Regulatory Commission ◽  
Quality Assurance Program ◽  
Term Operation ◽  
Safety Requirements ◽  
Plant Safety ◽  
Regulatory Commission ◽  
License Renewal

In Brazil, according to Cnen standard, a nuclear power plant has authorization to operate for 40 years. Angra 1 commercial operation started in 1985 and it has license to operate until 2024. Eletronuclear aims to extend the operation of the Angra 1 plant from 40 to 60 years. To obtain the license renewal by more than 20 years (long-term operation), Eletronuclear will need to meet the requirements of 10 CFR Part 54, Cnen NT-CGRC-007/18 and NT-CGRC-008/18 (Cnen technical notes). To obtain a license renewal to a long-term operation it is necessary to demonstrate that the plants will operate according to safety requirements, through analysis, testing, aging management, system upgrades, as well as additional inspections. Plant operators and regulators must always ensure that plant safety is maintained and, when it is possible, strengthened during the long-term operation of the plant. One of the documents to obtain a license renewal to a long-term operation is the Quality Assurance Program (QAP). Angra 1 has a QAP according to 10CFR 50 App B and Cnen NN 1.16 for safety related items. However, according to 10 CFR50.34, Nureg-1800 Appendix A.2, Nureg-1801 Appendix A-1 of Nuclear Regulatory Commission (NRC) and NT-CGRC-007/18 and NT-CGRC-008/18 of Cnen, the QAP needs to include the items that are not safety related but are included in the Aging Management. This article will discuss the Angra 1 QAP for the license renewal to a long-term operation according the standards approved by Cnen.

scholarly journals Study of the Effect of Addition of Hydrogen to Natural Gas on Diaphragm Gas Meters

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 3006 ◽  
Author(s):  
Jacek Jaworski ◽  
Paweł Kułaga ◽  
Tomasz Blacharski
Keyword(s):  
Natural Gas ◽  
Energy Transformation ◽  
Important Conclusion ◽  
Gas Network ◽  
Term Operation ◽  
Operational Safety ◽  
Power To Gas ◽  
Technical Regulations ◽  
Over Time

Power-to-gas technology plays a key role in the success of the energy transformation. This paper addresses issues related to the legal and technical regulations specifying the rules for adding hydrogen to the natural gas network. The main issue reviewed is the effects of the addition of hydrogen to natural gas on the durability of diaphragm gas meters. The possibility of adding hydrogen to the gas network requires confirmation of whether, within the expected hydrogen concentrations, long-term operation of gas meters will be ensured without compromising their metrological properties and operational safety. Methods for testing the durability of gas meters applied at test benches and sample results of durability tests of gas meters are presented. Based on these results, a metrological and statistical analysis was carried out to establish whether the addition of hydrogen affects the durability of gas meters over time. The most important conclusion resulting from the conducted study indicates that, for the tested gas meter specimens, there was no significant metrological difference between the obtained changes of errors of indications after testing the durability of gas meters with varying hydrogen content (from 0% to 15%).

Analysis of crystallite size changes in a hematite and magnetite formed on steel used in the power idustry

2017 ◽  
Vol 1 (21) ◽  
pp. 65-73
Author(s):  
Monika Gwoździk
Keyword(s):  
Elevated Temperature ◽  
Oxide Layer ◽  
Cross Section ◽  
X Ray ◽  
Term Operation ◽  
Diffraction Line Profile ◽  
Crystallite Sizes ◽  
Scherrer Formula ◽  
Pipe Outlet

The paper presents results of studies on the crystallite sizes of oxide layer formed during a long-term operation on 10CrMo9-10 steel at an elevated temperature (T = 545° C, t = 200,000 h). This value was determined by a method based on analysis of the diffraction line profile, according to a Scherrer formula. The oxide layer was studied on a surface and a cross-section at the outer and inner site on the pipe outlet, at the fire and counter-fire wall of the tube. X-ray studies were carried out on the surface of a tube, then the layer’s surface was polished and the diffraction measurements repeated to reveal differences in the originated oxides layer.

Retention and expression of recombinant plasmids in suspended and biofilm-bound bacteria degrading trichloroethene (TCE)

1997 ◽  
Vol 36 (10) ◽  
pp. 1-8 ◽  
Author(s):  
James D. Bryers ◽  
Robert R. Sharp
Keyword(s):  
Biofilm Reactor ◽  
Bacterial Biofilm ◽  
Laboratory Evaluation ◽  
Recombinant Bacteria ◽  
Suitable Host ◽  
Term Operation ◽  
Open Environment ◽  
Recombinant Microorganisms ◽  
Extracellular Polymer

Exposure of plasmid recombinant microorganisms to an open environment, either inadvertently or intentionally, requires research into those fundamental processes that govern plasmid retention, transfer and expression. In the open environment, a majority of the microbial activity occurs associated with an interface, within thin biological layers consisting of cells and their insoluble extracellular polymer, layers known as biofilms. Current toxic wastewater or wastegas treatment reactors exploit bacterial biofilm systems for certain system operating advantages. Using recombinant bacteria within a biofilm reactor to degrade xenobiotic wastes requires finding a suitable host to harbor and express the desired plasmid phenotype. Suitable host characteristics include: the ability to produce copious amounts of biofilm, resistance to waste-related injury and toxicity, and the ability to retain and express the desired plasmid during long term operation. This paper reports on a laboratory evaluation of factors governing plasmid retention and the expression of trichloroethene (TCE) degradative capacity in both suspended and biofilm cultures.

Restoration of cylinder liners for automotive tractors engines in modern conditions

2020 ◽  
pp. 122-133
Author(s):  
Vyacheslav A. Denisov ◽  
Aleksandr Yu. Kostyukov ◽  
Roman N. Zadorozhniy
Keyword(s):  
Adhesion Strength ◽  
Electrode Materials ◽  
Research Purpose ◽  
Laboratory Studies ◽  
Term Operation ◽  
Operational Load ◽  
Operational Tests ◽  
Conducting Research ◽  
Cylinder Liners

One of the most promising technologies for restoring machine parts and cylinder liners is electric spark treatment as the most versatile technology that provides high-quality restoration of worn parts with wear up to 0.5 mm. (Research purpose) The research purpose is in developing a technology for restoring various cylinder liners by means of electric spark processing, selecting optimal modes and electrode materials that allow improving the quality of repair and increasing the post-repair life of the sleeve. (Materials and methods) It was taken into account when conducting research aimed at restoring the geometric parameters of the sleeve, that the coating must have sufficient adhesion strength to the surface of the sleeve under mechanical, thermal loads and long-term operation. Laboratory studies of the adhesion strength of electric spark coatings on the separation (adhesive) and on the cut, as well as tribotechnical studies of interfaces were conducted. Authors have found by analyzing the results of operational tests of restored and new cylinder liners the prospects for using electric spark treatment of worn parts, including diesel engine liners. (Results and discussion) It was shown by laboratory studies of the adhesion strength of electric spark coatings with a 0.2 mm thick BrMKc 3-1 electrode to the working surface of cylinder liners that their separation strength (adhesive) was 20-40 megapascals, and the shear strength (cohesive) was 50-80 megapascals. It was found that this provides the required functional strength of coatings with maximum operational load. The article presents the results of comprehensive research in graphs and tables. (Conclusions) The research conducted in the CCP "Nano-Center" of the FSAC VIM and operational tests in the 2nd bus fleet of Moscow confirmed the principal possibility of effectively restoring cast iron liners (blocks) using the technology of electric spark processing.

Sign in / Sign up

Export Citation Format

Share Document