Diamond turning fabrication of an ultra-compact endoscope

2016 ◽  
Vol 5 (4) ◽  
Author(s):  
Chih-Yu Huang ◽  
Rongguang Liang
Keyword(s):  
Optical System ◽  
Low Cost ◽  
High Accuracy ◽  
Diamond Turning ◽  
Fabrication Process ◽  
Stray Light ◽  
Assembly Process ◽  
Interference Fringes ◽  
Compact Size ◽  
Endoscope System

AbstractIn this paper, we propose a technique by integrating mechanical mounts into lens elements to fulfill a self-aligned and self-assembled optical system. To prove this concept, we designed, fabricated, and tested an ultra-compact endoscope that adopts this technique. By taking advantages of the specially designed fixture and observing the interference fringes between the lens and fixture, we developed a method to minimize decenter and tilt between the two surfaces of the endoscope lens during the diamond turning fabrication process. The integrated mechanical mounts provide an easy assembly process for the endoscope system while maintaining high accuracy in system alignment. With the application of heat shrink tube as the endoscope system holder and to block stray light, the proposed endoscope system has the advantages of low cost, compact size, and high imaging quality.

scholarly journals Low-Cost Multisensor Integrated System for Online Walking Gait Detection

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Lingyun Yan ◽  
Guowu Wei ◽  
Zheqi Hu ◽  
Haohua Xiu ◽  
Yuyang Wei ◽  
...  
Keyword(s):  
Detection System ◽  
Low Cost ◽  
Detection Algorithm ◽  
High Accuracy ◽  
Integrated System ◽  
Heel Strike ◽  
Detection Accuracy ◽  
Time Error ◽  
Kinematic Data ◽  
Compact Size

A three-dimensional motion capture system is a useful tool for analysing gait patterns during walking or exercising, and it is frequently applied in biomechanical studies. However, most of them are expensive. This study designs a low-cost gait detection system with high accuracy and reliability that is an alternative method/equipment in the gait detection field to the most widely used commercial system, the virtual user concept (Vicon) system. The proposed system integrates mass-produced low-cost sensors/chips in a compact size to collect kinematic data. Furthermore, an x86 mini personal computer (PC) running at 100 Hz classifies motion data in real-time. To guarantee gait detection accuracy, the embedded gait detection algorithm adopts a multilayer perceptron (MLP) model and a rule-based calibration filter to classify kinematic data into five distinct gait events: heel-strike, foot-flat, heel-off, toe-off, and initial-swing. To evaluate performance, volunteers are requested to walk on the treadmill at a regular walking speed of 4.2 km/h while kinematic data are recorded by a low-cost system and a Vicon system simultaneously. The gait detection accuracy and relative time error are estimated by comparing the classified gait events in the study with the Vicon system as a reference. The results show that the proposed system obtains a high accuracy of 99.66% with a smaller time error (32 ms), demonstrating that it performs similarly to the Vicon system in the gait detection field.

scholarly journals Simultaneous Strain and Temperature Sensor Based on a Fiber Mach-Zehnder Interferometer Coated with Pt by Iron Sputtering Technology

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1535 ◽  
Author(s):  
Xinran Dong ◽  
Haifeng Du ◽  
Xiaoyan Sun ◽  
Ji’an Duan
Keyword(s):  
Simultaneous Measurement ◽  
Temperature Sensor ◽  
Low Cost ◽  
High Sensitivity ◽  
Single Mode ◽  
Zehnder Interferometer ◽  
Strain Sensitivity ◽  
Interference Fringes ◽  
Compact Size ◽  
Mach Zehnder Interferometer

We demonstrated a fiber in-line Mach-Zehnder interferometer (MZI) coated with platinum (Pt) for the simultaneous measurement of strain and temperature. The sensor was fabricated by splicing a section of multimode fiber (MMF) between two single mode fibers (SMFs) and the Pt coating was prepared by iron sputtering technology. Fine interference fringes of over 20 dB with a compact size of 20 mm were achieved. The experimental results of the two different resonant dips showed strain sensitivities of −2.06 pm/με and −2.21 pm/με, as well as temperature sensitivities of 55.2 pm/°C and 53.4 pm/°C, respectively. Furthermore, it was found that the Pt coating can improve the strain sensitivity significantly, resulting in an increase of about 54.5%. In addition, the sensor has advantages of easy fabrication, low cost, and high sensitivity, showing great potential for the dual-parameter sensing of strain and temperature.

scholarly journals Low cost, high accuracy 1.5m2 heliostat

2020 ◽  
Author(s):  
Derek Schulte ◽  
Kyam Krieger ◽  
Carl W. Chin ◽  
Alexander Sonn
Keyword(s):  
Low Cost ◽  
High Accuracy

scholarly journals A Machine Vision Approach for Bioreactor Foam Sensing

2021 ◽  
pp. 247263032110088
Author(s):  
Jonas Austerjost ◽  
Robert Söldner ◽  
Christoffer Edlund ◽  
Johan Trygg ◽  
David Pollard ◽  
...  
Keyword(s):  
Machine Learning ◽  
Machine Vision ◽  
State Of The Art ◽  
Low Cost ◽  
High Accuracy ◽  
Consumer Electronics ◽  
Learning System ◽  
Automotive Applications ◽  
Fine Grained

Machine vision is a powerful technology that has become increasingly popular and accurate during the last decade due to rapid advances in the field of machine learning. The majority of machine vision applications are currently found in consumer electronics, automotive applications, and quality control, yet the potential for bioprocessing applications is tremendous. For instance, detecting and controlling foam emergence is important for all upstream bioprocesses, but the lack of robust foam sensing often leads to batch failures from foam-outs or overaddition of antifoam agents. Here, we report a new low-cost, flexible, and reliable foam sensor concept for bioreactor applications. The concept applies convolutional neural networks (CNNs), a state-of-the-art machine learning system for image processing. The implemented method shows high accuracy for both binary foam detection (foam/no foam) and fine-grained classification of foam levels.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

scholarly journals Fabrication of Porous Silicon Based Humidity Sensing Elements on Paper

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Tero Jalkanen ◽  
Anni Määttänen ◽  
Ermei Mäkilä ◽  
Jaani Tuura ◽  
Martti Kaasalainen ◽  
...  
Keyword(s):  
Porous Silicon ◽  
Smart Cities ◽  
Low Cost ◽  
Electrical Characterization ◽  
Fabrication Process ◽  
Sensing Element ◽  
Paper Substrate ◽  
Roll To Roll ◽  
Silver Electrodes ◽  
Silicon Based

A roll-to-roll compatible fabrication process of porous silicon (pSi) based sensing elements for a real-time humidity monitoring is described. The sensing elements, consisting of printed interdigitated silver electrodes and a spray-coated pSi layer, were fabricated on a coated paper substrate by a two-step process. Capacitive and resistive responses of the sensing elements were examined under different concentrations of humidity. More than a three orders of magnitude reproducible decrease in resistance was measured when the relative humidity (RH) was increased from 0% to 90%. A relatively fast recovery without the need of any refreshing methods was observed with a change in RH. Humidity background signal and hysteresis arising from the paper substrate were dependent on the thickness of sensing pSi layer. Hysteresis in most optimal sensing element setup (a thick pSi layer) was still noticeable but not detrimental for the sensing. In addition to electrical characterization of sensing elements, thermal degradation and moisture adsorption properties of the paper substrate were examined in connection to the fabrication process of the silver electrodes and the moisture sensitivity of the paper. The results pave the way towards the development of low-cost humidity sensors which could be utilized, for example, in smart packaging applications or in smart cities to monitor the environment.

High accuracy low-cost videogrammetric system: an application to 6DOF estimation of ship models

2013 ◽  
Author(s):  
Erica Nocerino ◽  
Fabio Menna ◽  
Salvatore Troisi
Keyword(s):  
Low Cost ◽  
High Accuracy

Design and Implement of High-Accuracy On-Line Metal Thickness Measuring Instrument Based on NiosII Processor

2013 ◽  
Vol 834-836 ◽  
pp. 930-934
Author(s):  
Shou Liang Yang ◽  
Bao Liang Yang
Keyword(s):  
Eddy Current ◽  
Low Cost ◽  
High Accuracy ◽  
Resolving Power ◽  
Current Sensor ◽  
Measuring Instrument ◽  
Precision Data ◽  
Eddy Current Sensor ◽  
Metal Thickness ◽  
On Line

The paper proposes a new design of high-accuracy On-line Metal Thickness Measuring Instrument, which was based on EP2C20 series FPGA chip, through adding NiosII soft processor and other interfaces to FPGA, equipped with high precision data collection system and TFT LCD module and so on. The key hardware blocks schematics and components of the RC Oscillation Circuit,eddy current sensor Circuit,rectifier and filter Circuit,A/D converting circuit,FPGA Circuit are described,software flow charts and sample codes are given. According to practice, The measurement range of this system is 1~100 mm and the resolving power is 0.1 μm. degree of linearity is 1%, The system has many features including small volume of hardware, low cost, high detecting precision, convenient operating, high intelligent and so on, leading to broad and bright future. Key words: NiosII processor; eddy current sensor; metal thickness

Sign in / Sign up

Export Citation Format

Share Document