scholarly journals Sulphonation of Expanded Polystyrene Waste Under Microwave Irradiation

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Wiesław W. Sułkowski ◽  
Agnieszka Wolińska ◽  
Anna Sułkowska ◽  
Krzysztof Nowak ◽  
Dariusz Bogdal

AbstractChemical modification of polymeric materials is one way of polymer waste management. In our study, expanded polystyrene waste (EPS), used as the reference material, was converted into polymeric flocculants by the sulphonation reaction. Thus, poly(styrenesulphonate) acids (EPSS) were obtained from EPS during the sulphonation process with sulphuric acid as the sulphonation agent and Ag2SO4 as the catalyst under both conventional heating and microwave conditions. At the termination of the process the products were precipitated in the form of sodium salts (NaEPSS) in the reaction with Na2CO3 and their characteristics were given. The influence of temperature and time of reaction on the properties of EPSS and NaEPSS was studied and compared with conventional and microwave conditions. The results showed that the sulphonation process performed under microwave irradiation allowed us to receive products with properties similar to the ones obtained under conventional conditions but the reaction time was substantially reduced from 1 and ½ hour to 15 min.

2021 ◽  
Vol 5 (2) ◽  
pp. 14-19
Author(s):  
Olena Dan ◽  
Larysa Trofimova

Expanded polystyrene is widely used as a material for packaging, in modern construction as a heat and sound insulation layer, in thermal insulation systems for buildings, as well as tanks and pipelines. It is additionally used in foundry engineering for the production of models which are gasified during the production of castings from ferrous and non-ferrous alloys under the contact with liquid metal. The use of expanded polystyrene products is associated with waste generation, both in production and in consumption. About 40–50 kg/person of polystyrene waste is generated per year. The peculiarity of polymeric wastes is their resistance to aggressive environments. They do not rot and the destruction processes in natural conditions proceed rather slowly, with the formation of harmful substances that poison the environment. Therefore, the problem of the processing of waste from polymeric materials is of great importance, not only from the standpoint of environmental protection, but also due to the fact that in conditions of a shortage of polymer raw materials, this waste becomes a powerful raw material resource. This article describes the prospects for recycling expanded polystyrene wastes in foundry engineering. In this work, the properties of molding and core sands containing a combined binder, consisting of a solution of expanded polystyrene wastes in turpentine and clay were investigated, and their main characteristics (weight during stretching and crumbling) were determined. Molding and core mixtures, which contain only a binder in the form of a solution of expanded polystyrene in turpentine, have a crude strength of not more than 0.01 MPa. The introduction of a mixture of clay in the amount of 2–3% allows a crude strength of the mixture of up to 0.05 MPa to be obtained. After drying, the investigated mixtures containing a solution of expanded polystyrene wastes and clay have a tensile strength of up to 2.1 MPa. Mixtures into which a solution of polystyrene wastes and clay was introduced have an insignificant gas capacity and satisfactory gas permeability.


2020 ◽  
pp. 49-52
Author(s):  
S.E. YANUTINA ◽  

The relevance of research in the factory laboratory of JSC «198 KZHI», which is part of the HC GVSU «Center», is dictated by the need to dispose of foam polystyrene waste that occurs in large quantities when producing the precast concrete. In the production of three-layer external wall panels, polystyrene heatinsulating plates of the PPS 17-R-A brand are used as an effective insulation material. The secondary use of PPS 17-R-A for its intended purpose, as a heater, is not possible. The volume of foam polystyrene produced varies from 25 to 45 m3 per month. Utilization (disposal) of foam polystyrene waste is an expensive undertaking. Its use as a filler in the production of expanded polystyrene blocks was tested in the factory’s laboratory to produce foam polystyrene concrete with specified physical and mechanical characteristics. The results of testing of expanded polystyrene concrete of classes B2.5 and B 7.5 are presented. It is shown that under the conditions of the reinforced concrete factory technology, the production of polystyrene concrete blocks is possible with the achievement of the design strength. The information presented in the article is aimed at motivating specialists who produce recast concrete to the possibility of using foam polystyrene waste for low-rise construction. Keywords: foam polystyrene, ecology, energy efficiency, foam polystyrene concrete, foam polystyrene heat insulation plates, precast concrete.


2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.


2020 ◽  
Vol 7 (3) ◽  
pp. 183-195
Author(s):  
Musa Özil ◽  
Emre Menteşe

Background: Benzoxazole, containing a 1,3-oxazole system fused with a benzene ring, has a profound effect on medicinal chemistry research owing to its important pharmacological activities. On the other hand, the benzoxazole derivative has exhibited important properties in material science. Especially in recent years, microwave-assisted synthesis is a technique that can be used to increase diversity and quick research in modern chemistry. The utilization of microwave irradiation is beneficial for the synthesis of benzoxazole in recent years. In this focused review, we provide a metaanalysis of studies on benzoxazole in different reaction conditions, catalysts, and starting materials by microwave technique so far, which is different from conventional heating. Methods: Synthesis of different kind of benzoxazole derivatives have been carried out by microwave irradiation. The most used method to obtain benzoxazoles is the condensation of 2-aminophenol or its derivatives with aldehydes, carboxylic acids, nitriles, isocyanates, and aliphatic amines. Results: Benzoxazole system and its derivatives have exhibited a broad range of pharmacological properties. Thus, many scientists have remarked on the importance of the synthesis of different benzoxazole derivatives. Conventional heating is a relatively inefficient and slow method to convey energy in orientation to the reaction medium. However, the microwave-assisted heating technique is a more effective interior heating by straight coupling of microwave energy with the molecules. Conclusion: In this review, different studies were presented on the recent details accessible in the microwave- assisted techniques on the synthesis of the benzoxazole ring. It presents all examples of such compounds that have been reported from 1996 to the present. Benzoxazoles showed an extensive class of chemical substances not only in pharmaceutical chemistry but also in dyestuff, polymer industries, agrochemical, and optical brighteners. Thus the development of fast and efficient achievement of benzoxazoles with a diversity of substituents in high yield is getting more noteworthy. As shown in this review, microwave-assisted synthesis of benzoxazoles is a very effective and useful technique.


Synlett ◽  
2018 ◽  
Vol 29 (08) ◽  
pp. 1047-1054 ◽  
Author(s):  
Fulvia Felluga ◽  
Fabio Benedetti ◽  
Federico Berti ◽  
Sara Drioli ◽  
Giorgia Regini

A practical and general method for the Biginelli cyclocondensation of guanidine with aldehydes and β-dicarbonyl compounds is described and illustrated with the synthesis of a set of 26 functionalized 2-amino-3,4-dihydropyrimidines. The simple protocol involves the ­microwave-mediated reaction of a twofold excess of guanidine hydrochloride with the required reaction partners in an alcohol at 120 °C. Yields are generally good, with short reaction times and a simple workup. The scope is considerably wider than that of similar reactions ­carried out under conventional heating.


2019 ◽  
Vol 19 (2) ◽  
pp. 1122-1125 ◽  
Author(s):  
Thinh Van Pham ◽  
Thuong Thi Nguyen ◽  
Duy Trinh Nguyen ◽  
Tran Van Thuan ◽  
Phuong Quynh Thi Bui ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document