Use of Polyguanidine-Derivatives-Based Biocides for Microbial Growth Inhibition and for the Development of a Novel Polyethylene-Based Composite Material Resistant to the Formation of Multispecies Microbial Biofilms

This study aimed to investigate the dependence of the biocidal activity of polyguanidine (co)polymers on their structure during the formation of biofilms by active PE-degrading cultures of model microorganisms. The Bc-2 copolymer of methacryloyl guanidine hydrochloride (MGHC) and diallyldimethylammonium chloride (DADMAC), which suppressed both the formation of biofilms and the growth of planktonic cultures, exhibited the highest activity. When PE was exposed in tropical soil, the composition of the microbial community on the PE surface differed significantly from that of the community in the surrounding soil. In particular, the proportion of Actinobacteria increased from 7% to 29%, while the proportion of Bacteroidetes decreased from 38% to 8%. Keywords: biofilms, polyhexamethylene guanidine salts, dynamics of biofilm formation, antibiofilm effect, composite materials

Green and efficient synthesis of 1, 2, 4-Triazolidine-3-thiones using guanidine hydrochloride as a recyclable catalyst under the aqueous condition

A rapid and highly efficient methodology for the synthesis of 1, 2, 4-Triazolidine-3-thiones derivatives has been developed in the presence of a catalytic amount of guanidine hydrochloride using water as a solvent. The reaction of thiosemicarbazide with different aryl aldehydes resulted in the formation of title compounds in good yields (85% -95%) with a convenient reaction time (20-30 min). The key advantages of this approach are shorter reaction time, energy efficiency, easy work-up procedure, and wide substrate scope tolerance. Further, the catalyst was recycled without significant loss of its catalytic activity

eDNA Inactivation and Biofilm Inhibition by the Polymeric Biocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here, we investigated how different biocides affect the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides, alcohols, hydrogen peroxide, quaternary ammonium compounds, and the polymeric biocide polyhexamethylene guanidine hydrochloride (PHMG-Cl), was evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release, and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA–PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high-molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after 4 weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain, which demonstrates the potential of a polymeric biocide as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.

Mining the Wheat Grain Proteome

Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using sample weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).

Antimicrobial activity of polyhexamethylene guanidine hydrochloride derivatives against multi-resistant strains of microorganisms

The resistance of bacteria to the disinfectants used is one of the pressing health problems that need to be addressed in order to prevent the formation and spread of resistant strains. This leads to a sharp decrease in the effectiveness of anti-epidemic measures and contributes to maintaining a high level of morbidity. In the context of the growing incidence of HAIs, their polyetiology, the large adaptive potential of opportunistic microorganisms, and the growing resistance to antimicrobial drugs, it is necessary to search for new or modify the corresponding substances of plant or synthetic origin that have antimicrobial action and are used as antimicrobial agents. One of the representatives of this class of compounds are polyguanidines, characterized by high antimicrobial activity and low toxicity. Due to the high reactivity of the guanidine group, as well as the ease of synthesis and the relative availability of raw materials, N-phenyl- and N-octyl-substituted derivatives of polyhexamethylene guanidine hydrochloride were obtained by melt polycondensation, their molecular weight characteristics were determined, and the structure was investigated by IR spectroscopy. An earlier study of the acute toxicity of polyhexamethylene guanidine hydrochloride derivatives after a single oral intake of drugs into the body of laboratory animals (white mice) made it possible to establish the following LD50 values: polyhexamethylene guanidine hydrochloride - 850.0 ± 112.02 mg / kg; N-phenyl-substituted polyhexamethylene guanidine hydrochloride - 1399.9 ± 120.51 mg / kg; N-octyl-substituted polyhexamethylene guanidine hydrochloride - 1150.0 ± 137.40 mg / kg. The obtained values, according to the tabulation of hazard classes, allow the synthesized derivatives to be classified into the fourth hazard class and open up the possibility of using disinfectants as active components. The evaluation of the antibacterial properties of the samples was carried out by the method of serial dilutions in agar on hospital strains of bacteria and fungi isolated from the biomaterial of patients of the Republican Clinical Hospital named after N.A. Semashko, according to the clinical guidelines "Laboratory diagnosis of community-acquired pneumonia" 2014; "Bacteriological analysis of urine" 2014; "Determination of the susceptibility of microorganisms to antimicrobial drugs" 2015 It was found that N-substituted derivatives exhibit a greater antimicrobial effect in comparison with an unsubstituted polymer. The most sensitive to all the drugs presented are the yeast-like fungi Candida albicans (No. 2495) (complete suppression), as well as methicillin-resistant St. aureus (no. 2544), and the substituted samples almost completely suppress its growth. The most resistant strains are P. aeruginosa (No. 2281), A. Baumannii (No. 2806) and K. Pneumoniae (No. 3023), the percentage of reduction of these bacteria under the action of substituted samples does not exceed 41%, which is explained by their multi-resistance.

Boron Carbon Oxynitride as a Novel Metal-Free Photocatalyst

Boron-based nanomaterials are emerging as non-toxic, earth-abundant (photo)electrocatalyst materials in solar energy conversion for the production of solar hydrogen fuel and environmental remediation. Boron carbon oxynitride (BCNO) is a quaternary semiconductor with electronic, optical, and physicochemical properties that can be tuned by varying the composition of boron, nitrogen, carbon, and oxygen. However, the relationship between BCNO's structure and -photocatalytic activity relationship has yet to be explored. We performed an in-depth spectroscopic analysis to elucidate the effect of using two different nitrogen precursors and the effect of annealing temperatures in the preparation of BCNO. BCNO nanodisks (D = 6.7 ± 1.1 nm) with turbostratic boron nitride diffraction patterns were prepared using guanidine hydrochloride as the nitrogen source precursor upon thermal annealing at 800°C. The X-ray photoelectron spectroscopy (XPS) surface elemental analysis of the BCNO nanodisks revealed the B, C, N, and O compositions to be 40.6%, 7.95%, 37.7%, and 13.8%, respectively. According to the solid-state 11B NMR analyses, the guanidine hydrochloride-derived BCNO nanodisks showed the formation of various tricoordinate BNx(OH)3−x species, which also served as one of the photocatalytic active sites. The XRD and in-depth spectroscopic analyses corroborated the preparation of BCNO-doped hexagonal boron nitride nanodisks. In contrast, the BCNO annealed at 600 °C using melamine as the nitrogen precursor consisted of layered nanosheets composed of B, C, N, and O atoms covalently bonded in a honeycomb lattice as evidence by the XRD, XPS, and solid-state NMR analysis (11B and 13C) analyses. The XPS surface elemental composition of the melamine-derived BCNO layered structures consisted of a high carbon composition (75.1%) with a relatively low boron (5.24%) and nitrogen (7.27%) composition, which indicated the formation of BCNO-doped graphene oxides layered sheet structures. This series of melamine-derived BCNO-doped graphene oxide layered structures were found to exhibit the highest photocatalytic activity, exceeding the photocatalytic activity of graphitic carbon nitride. In this layered structure, the formation of the tetracoordinate BNx(OH)3−x(CO) species and the rich graphitic domains were proposed to play an important role in the photocatalytic activity of the BCNO-doped graphene oxides layered structures. The optical band gap energies were measured to be 5.7 eV and 4.2 eV for BCNO-doped hexagonal boron nitride nanodisks and BCNO-doped graphene oxides layered structures, respectively. Finally, BCNO exhibited an ultralong photoluminescence with an average decay lifetime of 1.58, 2.10, 5.18, and 8.14 µs for BGH01, BGH03, BMH01, BMH03, respectively. This study provides a novel metal-free photocatalytic system and provides the first structural analysis regarding the origin of BCNO-based photocatalyst. Graphical Abstract

Green synthesis, characterization, biological evaluation and docking study of some pyrazoline and pyrimidine derivatives

Green and classical techniques have been utilized for preparing of a variety of aryl - substituted pyrazoline and pyrimidine derivatives (2-8). Reactions of chalcones 1 with semicarbazide and thiosemicarbazide, nicotinic acid hydrazide and amino guanidine hydrochloride afforded the corresponding N-substituted pyrazoline derivatives 2-5. Pyrimidine derivatives 6-8 were achieved via reaction of chalcone derivatives 1 with several reagents namely: guanidine nitrate, thiourea and 6-amino-2-thioxo-2,3- dihydropyrimidin-4(1H)-one under conventional and ultrasonic conditions. Ultrasonic method was found to be an easy work-up procedure and it gave high yield in comparison with conventional method. The structures of new synthesis compounds were characterized by elemental and spectral analyses. Some of newly compounds were tested in vitro antibacterial activity against some gram–positive and gram–negative. The antimicrobial results displayed favorable antimicrobial activity. Molecular docking has been perfomed for compound 5b using MOE 2008.10, The data results obtained are quite promising.

eDNA Inactivation and Biofilm Inhibition by the Polymeric Biocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here we investigated how different biocides affected the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides including alcohols, hydrogen peroxide, quaternary ammonium compounds, and polymeric guanidines were evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA-PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after four weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain which demonstrates the potential of PHMG-Cl as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.

Construction of ferritin hydrogels utilizing subunit–subunit interactions

Various proteins form nanostructures exhibiting unique functions, making them attractive as next-generation materials. Ferritin is a hollow spherical protein that incorporates iron ions. Here, we found that hydrogels are simply formed from concentrated apoferritin solutions by acid denaturation and subsequent neutralization. The water content of the hydrogel was approximately 80%. The apoferritin hydrogel did not decompose in the presence of 1 M HCl, 2-mercaptoethanol, or methanol but was dissolved in the presence of 1 M NaOH, by heating at 80°C, or by treatment with trypsin or 6 M guanidine hydrochloride. The Young’s modulus of the hydrogel was 20.4 ± 12.1 kPa according to local indentation experimentes using atomic force microscopy, indicating that the hydrogel was relatively stiff. Transition electron microscopy measurements revealed that a fibrous network was constructed in the hydrogel. The color of the hydrogel became yellow-brown upon incubation in the presence of Fe3+ ions, indicating that the hydrogel adsorbed the Fe3+ ions. The yellow-brown color of the Fe3+-adsorbed hydrogel did not change upon incubation in pure water, whereas it became pale by incubating it in the presence of 100 mM ethylenediaminetetraacetic acid (EDTA). The apoferritin hydrogel also adsorbed Co2+ and Cu2+ ions and released them in the presence of EDTA, while it adsorbed less Ni2+ ions; more Fe3+ ions adsorbed to the apoferritin hydrogel than other metal ions, indicating that the hydrogel keeps the iron storage characteristic of ferritin. These results demonstrate a new property of ferritin: the ability to form a hydrogel that can adsorb/desorb metal ions, which may be useful in designing future biomaterials.