Antibacterial mechanism of biogenic copper nanoparticles synthesized using Heliconia psittacorum leaf extract

2016 ◽  
Vol 5 (6) ◽  
Author(s):  
Kaushik Roy ◽  
Chandan K. Sarkar ◽  
Chandan K. Ghosh

AbstractHere, we report on the novel green synthesis of metallic copper nanoparticles from copper sulfate solution by using the leaf extract of

2020 ◽  
Vol 6 (3) ◽  
pp. 908-910
Author(s):  
C. Sreeja ◽  
K. Annieta Philip ◽  
K. Shamil ◽  
O.P. Asraj ◽  
S. Sreeja

In the present days the development of efficient green synthesis of metal nanoparticles has become a major focus of researchers. It was aimed in order to find a safe, economic and eco-friendly technique for the production of well characterized nanoparticles. The present study reports the green synthesis of copper nanoparticles using plant extract (pepper leaf extract) and a copper salt (copper chloride, CuCl2). Copper nanoparticles are produced by the reduction of CuCl2, while the aqueous leaf extract act as reducing agent. The formation of copper nanoparticles was recognized by the change of colour from blue to black. The synthesized nanoparticles were then characterized through EDAX, XRD, and UV-Vis spectrophotometry. EDAX confirmed the formation of copper nanoparticles. The UV-Vis spectrophotometer analysis confirmed the absorption peak of copper nanoparticles at wavelength of 500-700 nm. XRD analysis revealed three sharp peaks specifically referred to face centered cubic structure of metallic copper. This work was also carried out the optical studies of copper nanoparticles which were exposed to direct sunlight. This study reflected the effect of sunlight intensity on the absorption peak of copper nanoparticles.


2021 ◽  
Vol 108 ◽  
pp. 103194
Author(s):  
Francisco R.A. Ziegler-Rivera ◽  
Blanca Prado ◽  
Alfonso Gastelum-strozzi ◽  
Jorge Márquez ◽  
Lucy Mora ◽  
...  

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 555 ◽  
Author(s):  
Prince Edwin Das ◽  
Imad A. Abu-Yousef ◽  
Amin F. Majdalawieh ◽  
Srinivasan Narasimhan ◽  
Palmiro Poltronieri

The synthesis of metal nanoparticles using plant extracts is a very promising method in green synthesis. The medicinal value of Moringa oleifera leaves and the antimicrobial activity of metallic copper were combined in the present study to synthesize copper nanoparticles having a desirable added-value inorganic material. The use of a hydroalcoholic extract of M. oleifera leaves for the green synthesis of copper nanoparticles is an attractive method as it leads to the production of harmless chemicals and reduces waste. The total phenolic content in the M. oleifera leaves extract was 23.0 ± 0.3 mg gallic acid equivalent/g of dried M. oleifera leaves powder. The M. oleifera leaves extract was treated with a copper sulphate solution. A color change from brown to black indicates the formation of copper nanoparticles. Characterization of the synthesized copper nanoparticles was performed using ultraviolet-visible light (UV-Vis) spectrophotometry, Fourier-transform infrared (FTIR) spectrometry, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The synthesized copper nanoparticles have an amorphous nature and particle size of 35.8-49.2 nm. We demonstrate that the M. oleifera leaves extract and the synthesized copper nanoparticles display considerable antioxidant activity. Moreover, the M. oleifera leaves extract and the synthesized copper nanoparticles exert considerable anti-bacterial activity against Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, and Enterococcus faecalis (MIC values for the extract: 500, 250, 250, and 250 µg/mL; MIC values for the copper nanoparticles: 500, 500, 500, and 250 µg/mL, respectively). Similarly, the M. oleifera leaves extract and the synthesized copper nanoparticles exert relatively stronger anti-fungal activity against Aspergillus niger, Aspergillus flavus, Candida albicans, and Candida glabrata (MIC values for the extract: 62.5, 62.5, 125, and 250 µg/mL; MIC values for the copper nanoparticles: 125, 125, 62.5, and 31.2 µg/mL, respectively). Our study reveals that the green synthesis of copper nanoparticles using a hydroalcoholic extract of M. oleifera leaves was successful. In addition, the synthesized copper nanoparticles can be potentially employed in the treatment of various microbial infections due to their reported antioxidant, anti-bacterial, and anti-fungal activities.


Nano Express ◽  
2020 ◽  
Vol 1 (1) ◽  
pp. 010033
Author(s):  
Sandip Kumar Chandraker ◽  
Mishri Lal ◽  
Mithun Kumar Ghosh ◽  
Vivek Tiwari ◽  
Tanmay Kumar Ghorai ◽  
...  

2019 ◽  
Vol 73 (11) ◽  
pp. 945-946
Author(s):  
Rachel Fischer ◽  
Marco Oetken

For aluminum, a new visualization method is presented in which copper is deposited electrochemically. The fingerprint on the aluminum (trace carrier) serves as an insulator as it prevents direct contact between electrolyte and aluminum. The decisive factor is the choice of an ammoniacal copper sulfate solution, which acts as a corrosion inhibitor due to the ammonia molecules. This enables uniform copper deposition on aluminum and thus the development of a clearly defined negative image.


2014 ◽  
Vol 84 (19) ◽  
pp. 2026-2035 ◽  
Author(s):  
Bing Li ◽  
Dapeng Li ◽  
Jiping Wang

A three-axis automatic robot was coupled with a precision liquid dispenser to deposit copper on fabrics to be used as the conductive layer for assembly of textile-based flexible microstrip patch antennas. Two reactive solutions, copper sulfate and sodium borohydride, were sequentially dispensed on fabrics and a conductive copper was produced in situ and in real time, through a simple redox mechanism. Driving pressure, the number of dispensing cycles, concentration and composition (i.e. the addition of a complexing agent sodium citrate to the copper sulfate solution) of the reactive solutions were studied to optimize the dispensing process in favor of rapid copper deposition. The electrical performance of the resulting copper deposit and its adhesion to the textile substrates were characterized. A copper coating of about 0.2 ohm/□ sheet resistance could be prepared in less than 1 hour under a 45 kPa driving pressure, at a 200 mm·s−1 moving speed, and within 60 dispensing cycles.


1983 ◽  
Vol 22 (8) ◽  
pp. 1184-1187 ◽  
Author(s):  
A. Musinu ◽  
G. Paschina ◽  
G. Piccaluga ◽  
M. Magini

Sign in / Sign up

Export Citation Format

Share Document