scholarly journals Intelligent Monitoring Network Construction based on the utilization of the Internet of things (IoT) in the Metallurgical Coking Process

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 656-662 ◽  
Author(s):  
Jianhou Gan ◽  
Xingchao Wang ◽  
Juxiang Zhou ◽  
Lin Tang ◽  
Lingyun Yuan

Abstract With the development of the Internet of Things (IoT), a new and important research direction is possible using IoT to solve the problems of information and intelligence in the metallurgical industry. This paper proposes an intelligent monitoring network based on networking technology and uses the coking process as the research object. The construction of a coking process intelligence monitoring network should focus on the formation of a perception layer network and build on a ZigBee mesh clustered network. Moreover, it also puts forward a network routing establishment and data transmission mechanism. This study provides an effective reference for the wide application of the IoT in the intelligent management and monitoring of the metallurgical process.

2013 ◽  
Vol 380-384 ◽  
pp. 2641-2644
Author(s):  
Hong Liang Wang ◽  
Min Cao ◽  
Da Da Wang ◽  
Xing Huang ◽  
Shao Quan Zhang ◽  
...  

Nowadays, collected datas from existed substation are transported to the power supply bureau layer or YunNan grid layer in this way, it will not only cause the information sharing difficulty, but also make the information uninteroperable. While, intelligent substation construction program base on Internet of Things will greatly improve these problems.This paper gives the intelligent substation overall framework based on the Internet of Things makes a detailed introduction to implementation of technology.Finally, the intelligent substation unified information platform is designed based on the whole life cycle, in order to achieve the system intelligent monitoring, intelligent judgment, intelligent management, intelligent verification and so on. Through the unified information platform and experiment, the method is proved to be effective and feasible.


2012 ◽  
Vol 516-517 ◽  
pp. 1414-1418 ◽  
Author(s):  
Hua Yin ◽  
Bin Fa Long ◽  
Nai Zhou Wang

This article discussed the basic principles of the power line carrier application technology and an example scheme, The unique advantage of the power line carrier networking technology is applied in the Internet of things. The advantage of the application of the power line carrier in the difficult environment of radio frequency application and layout is pointed out.


IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 177297-177308
Author(s):  
Zejiang Huang ◽  
Qingguo Chen ◽  
Lifeng Zhang ◽  
Xiaohai Hu

2014 ◽  
Vol 687-691 ◽  
pp. 1966-1969 ◽  
Author(s):  
Qiu Dong Yu ◽  
Yun Chen Tian ◽  
Xu Feng Hua

With the advent of the third information revolution, the internet of things (IOT) and cloud computing, as the representative of the emerging field of information technology, began in force. As an important part of the information, agricultural information has opportunities and challenges. The current agricultural information service information integration is low, real-time information is not enough, personalized service issues is incomplete. This paper proposes an integrated agricultural information service model IOT building programs and cloud computing. The program implements networking technology and cloud computing technology docked in the field of agricultural information service, a better solution to the shortage of agricultural information service in the presence of current, reducing the threshold for the use of agricultural information services, improving the efficiency of agricultural information services.


2020 ◽  
Vol 10 (9) ◽  
pp. 3074 ◽  
Author(s):  
Samad Sepasgozar ◽  
Reyhaneh Karimi ◽  
Leila Farahzadi ◽  
Farimah Moezzi ◽  
Sara Shirowzhan ◽  
...  

This article reviewed the state-of-the-art applications of the Internet of things (IoT) technology applied in homes for making them smart, automated, and digitalized in many respects. The literature presented various applications, systems, or methods and reported the results of using IoT, artificial intelligence (AI), and geographic information system (GIS) at homes. Because the technology has been advancing and users are experiencing IoT boom for smart built environment applications, especially smart homes and smart energy systems, it is necessary to identify the gaps, relation between current methods, and provide a coherent instruction of the whole process of designing smart homes. This article reviewed relevant papers within databases, such as Scopus, including journal papers published in between 2010 and 2019. These papers were then analyzed in terms of bibliography and content to identify more related systems, practices, and contributors. A designed systematic review method was used to identify and select the relevant papers, which were then reviewed for their content by means of coding. The presented systematic critical review focuses on systems developed and technologies used for smart homes. The main question is ”What has been learned from a decade trailing smart system developments in different fields?”. We found that there is a considerable gap in the integration of AI and IoT and the use of geospatial data in smart home development. It was also found that there is a large gap in the literature in terms of limited integrated systems for energy efficiency and aged care system development. This article would enable researchers and professionals to fully understand those gaps in IoT-based environments and suggest ways to fill the gaps while designing smart homes where users have a higher level of thermal comfort while saving energy and greenhouse gas emissions. This article also raised new challenging questions on how IoT and existing developed systems could be improved and be further developed to address other issues of energy saving, which can steer the research direction to full smart systems. This would significantly help to design fully automated assistive systems to improve quality of life and decrease energy consumption.


2014 ◽  
Vol 556-562 ◽  
pp. 5852-5854
Author(s):  
Ying Wei

The internet of things perception and recognition by the ubiquitous information to the physical world. Ad Hoc provide suitable network environment to the internet of things, whose routing protocol Protect data transmission efficient and reliable. This paper not only analyzes the particularity of Ad Hoc network technology in the Internet of Things, but also simulates AODV and DSDV in test environment to analysis the communication performance in the internet of things.


2021 ◽  
Vol 37 (1) ◽  
pp. 205-217
Author(s):  
Qun Li ◽  
Bing Cao ◽  
Xing Wang ◽  
Jiu Jiang Wu ◽  
You Ke Wang

A new application of the internet of things in a low-cost greenhouse with no networked intelligent control equipment.The systematic water-saving management focused over the whole growth stage of crops, and it can effectively increase yield and quality.Replace some chemical fertilizer with fully-decomposed organic fertilizer and new types of fertilizer to reduce negative impact on soil and the environment.Regarding pesticide usage, we advocate prevention first and treatment second.Improve systematic water-saving management with regard decreases in crop yield and quality.Abstract. A basic greenhouse is an inexpensive type of greenhouse, which lacks networked intelligent control equipment; it is currently the most common type of greenhouse used in China. To manage planting activities intelligently and improve water use efficiency in these greenhouses, an intelligent planting management platform for strawberry based on the internet of things (IoT) is developed. On the platform, human-computer interaction occurs through the WeChat app on a mobile phone so that manual control of the strawberry environment in the greenhouse can be conducted. In this study, we add a user module in the perception layer of the IoT to obtain the information and manually control the environment in a basic greenhouse. The network layer uses narrowband IoT wireless transmission technology based on 4G. The application layer is designed with a systematic water-saving management knowledge base for strawberry. The systematic water-saving management feature includes seven parts: strawberry variety selection, planting seedlings, flower and fruit thinning, environmental control, disease and pest prevention and treatment, fertilizer management, and water-saving irrigation. Through the human–computer interaction platform, growers can receive decision-making options, planting management evaluation, query information retrieval, and regular relevant planting information. The application results of the platform showed the following: compared with management experience of growers, the water use efficiency of yield (WUEy) increased by 128.55%, the water use efficiency of production value (WUEpy) increased by 226.31%; the amount of chemical fertilizer decreased by 40%, the amount of pesticide decreased by 61.67%, and the cost of pesticide decreased by 32.48%; thus a decrease in the use of both fertilizer and pesticide was achieved. This study can directly provide technical support for strawberry intelligent management in basic greenhouses, and can also be used as a basic platform intelligent management systems for other crops grown in basic greenhouses. Keywords: Basic greenhouse, Intelligent agriculture, Internet of things, Sensor network , Systematic water-saving management, Water-use efficiency.


2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Shan Hua ◽  
Kaiyuan Han ◽  
Zhifu Xu ◽  
Minjie Xu ◽  
Hongbao Ye ◽  
...  

In recent years, with the continuous innovation of the Internet of Things technology, the image processing technology in the Internet of Things technology has become more and more mature. Automated pig raising will become the mainstream pig raising technology, making the research of image processing technology in the intelligent pig breeding face a change. It has become more and more important. The traditional pig raising model cannot provide a suitable growth and development environment for the pigs. The pigs are disturbed by diseases and environmental discomforts during the growth process, which increases the mortality of the pig breeding process and cannot provide consumers with a guarantee. In order to solve the problem of unfavorable factors during the growth of live pigs, this article uses image processing technology to analyze data through images obtained through automated monitoring and management, uses the system to conduct intelligent, digitized, and standardized management of pig breeding data, and reports to the corresponding. The control module issues instructions to improve the corresponding environmental information and realize the intelligent management of pig breeding. This article will use image processing technology to monitor the growth of pigs in intelligent pig breeding. Studies have shown that the use of image processing technology to realize the intelligent management of pig breeding can help pig farms to carry out manual management to improve production efficiency and management efficiency. The management mode of the pig industry has changed from fuzzy to refined. The breeding cost of pig farms and a lot of manpower and material resources should be reduced, reducing the probability of pigs getting sick and the impact of the environment, reducing the mortality of pigs, improving their economic benefits, and providing consumers with a strong guarantee.


Sign in / Sign up

Export Citation Format

Share Document