scholarly journals Case Study Regarding the Interests and Leisure Practices of Persons Aged 50 and over in Saint-Léonard, Suburb of Montreal: Seniors Vs. Baby Boomers

2016 ◽  
Vol 23 (2) ◽  
pp. 99-103
Author(s):  
Romain Roult ◽  
Hélène Carbonneau ◽  
Jean-Marc Adjizian ◽  
Émilie Belley-Ranger

Abstract Introduction. Several studies have shown that leisure contributes to improving seniors’ quality of life. However, some of this research has also highlighted the fact that there are marked physical, socioeconomic, and cultural disparities in this population. Material and methods. To this end, this article presents the results of a survey conducted in 2015 in Montreal with 464 respondents aged 50 and over regarding their interests and leisure practices. Results. This study highlights the importance that persons in this age group give to physical and outdoor recreation as well as free and outdoor activities. However, this study has also confirmed that there exist, regarding the problem of leisure, more or less significant differences among seniors and baby boomers which need to be taken into account by local actors. Conclusions. The results obtained and the correlated analyses clearly indicate that the senior population is not homogeneous with respect to their practices and their leisure needs. This analytical finding confirms that leisure and community services must be planned, programmed, and promoted taking into account these generational differences, as well as physical, socioeconomic, and cultural differences.

2021 ◽  
Vol 316 ◽  
pp. 01015
Author(s):  
Sriyadi ◽  
Ananti Yekti

To anticipate and develop rural areas, the government is currently promoting rural social and economic development, including rural agribusiness and agrotourism programs. This study aims to determine the level of sustainability of the agrotourism development model based on local wisdom. The research was conducted by interviewing fanners and related parties and conducting field observations. The development of agrotourism must be continued. It could be seen from the benefits of environmental conservation, beauty value, recreational value, science development, income, business opportunities for the community, services, promotion support, production, and quality of agriculture supporting agrotourism. Hence, the Karangtengah Tourism Village management should be more serious and professional to benefit the community.


2020 ◽  
Vol 29 (4) ◽  
pp. 685-690
Author(s):  
C. S. Vanaja ◽  
Miriam Soni Abigail

Purpose Misophonia is a sound tolerance disorder condition in certain sounds that trigger intense emotional or physiological responses. While some persons may experience misophonia, a few patients suffer from misophonia. However, there is a dearth of literature on audiological assessment and management of persons with misophonia. The purpose of this report is to discuss the assessment of misophonia and highlight the management option that helped a patient with misophonia. Method A case study of a 26-year-old woman with the complaint of decreased tolerance to specific sounds affecting quality of life is reported. Audiological assessment differentiated misophonia from hyperacusis. Management included retraining counseling as well as desensitization and habituation therapy based on the principles described by P. J. Jastreboff and Jastreboff (2014). A misophonia questionnaire was administered at regular intervals to monitor the effectiveness of therapy. Results A detailed case history and audiological evaluations including pure-tone audiogram and Johnson Hyperacusis Index revealed the presence of misophonia. The patient benefitted from intervention, and the scores of the misophonia questionnaire indicated a decrease in the severity of the problem. Conclusions It is important to differentially diagnose misophonia and hyperacusis in persons with sound tolerance disorders. Retraining counseling as well as desensitization and habituation therapy can help patients who suffer from misophonia.


2017 ◽  
Vol 2 (3) ◽  
pp. 57-62
Author(s):  
Anna Maria Siciliano

This paper presents a successful behavioral case study in treatment of chronic refractory cough in a 60-year-old adult female. The efficacy for speech-language pathology treating chronic cough is discussed along with description of treatment regime. Discussion focuses on therapy approaches used and the patient's report of changes in quality of life and frequency, duration, and severity reduction of her cough after treatment.


2020 ◽  
Vol 3 (2) ◽  
pp. 109-119
Author(s):  
Partono Partono

So far, in implementing school strategies, they tend not to utilize Information and Communication Technology (ICT), despite the availability of ICT resources available. Stages of strategic management are needed to generate the vision, mission, objectives, policy, program, budget, and procedures as well as control and evaluation process as an effort to utilize ICT to improve school quality. Based on the interpretation and the results of the study, it is concluded that schools have organized stages in strategic management that enable schools to have a quality profile. The impact of effective utilization of ICTs for schools is the achievement of effective school management, as per the National Education Standards, which is characterized by effective planning, implementation, control, and evaluation of school ICTs.The purpose of this study is to get a general description, describe, and reveal the Strategic Management of Information and Communication Technology Utilization to Improve the Quality of School Learning in Ciledug Al Musaddadiyah Vocational High School and Garut 1 Vocational High School, both on environmental analysis, strategic formulation, implementation and strategic evaluation. The research method used in this research is the case study method, because the problems studied occur in the place and situation of Ciledug Al Musaddadiyah Vocational School and Vocational High School 1 Garut. The use of case study models in this study is based on the consideration that to provide an overview of the strategic management activities of the use of ICTs carried out at vocational high schools with the ultimate goal of being able to improve the quality of school learning. Based on observations in the field of SMK 1 Garut and SMK Al Musaddadiyah Ciledug Garut is one of the public schools and private schools that have these advantages.


2019 ◽  
pp. 5-28
Author(s):  
Vadim V. Radaev

A sociological approach towards the generational cohort analysis is developed. A special emphasis is made upon the youngest adult generation of millennials coming out of their adolescence in the 2000s. A broad range of social indicators is used for empirical exploration of intra-generational differences between urban and rural millennials. Data were collected from the annual Russian Longitudinal Monitoring Survey (RLMS-HSE) in 2003—2016. Numerous significant differences have been revealed with regard to the educational level, family planning, use of modern gadgets and digital technologies, commitment to healthy lifestyles, and some values. Some practices are more widely spread among rural millennials, whereas other practices are more characteristic of urban millennials. Most of revealed differences are explained by the lower level of material well-being of rural millennials and lower quality of rural infrastructure.


2019 ◽  
Vol 1 (1) ◽  
pp. 16-18 ◽  
Author(s):  
Norafida Bahari ◽  
Nik Azuan Nik Ismail ◽  
Jegan Thanabalan ◽  
Ahmad Sobri Muda

In this article, we evaluate the effectiveness of Cone Beam Computed Tomography, through a case study, in assessing the complication of intracranial bleeding during an endovascular treatment of brain arteriovenous malformation when compared to Multislice-Detector Computed Tomography performed immediately after the procedure. The image quality of Cone Beam Computed Tomography has enough diagnostic value in differentiating between haemorrhage, embolic materials and the arteriovenous malformation nidus to facilitate physicians to decide for further management of the patient.


Author(s):  
Norafida Bahari ◽  
NikAzuan Nik Ismail ◽  
Jegan Thanabalan ◽  
Ahmad Sobri Muda

In this article, we evaluate the effectiveness of Cone Beam Computed Tomography, through a case study, in assessing the complication of intracranial bleeding during an endovascular treatment of brain arteriovenous malformation when compared to Multislice-Detector Computed Tomography performed immediately after the procedure. The image quality of Cone Beam Computed Tomography has enough diagnostic value in differentiating between haemorrhage, embolic materials and the arteriovenous malformation nidus to facilitate physicians to decide for further management of the patient.


2019 ◽  
Vol 11 (01) ◽  
pp. 1-7
Author(s):  
Roni Kusnowo ◽  
Kus Hanaldi

Animal feed knife is a tool that serves to cut and chop animal feed consisting of grass as the main ingredient with additives such as bran, herbs, centrate, cassava, tofu pulp and others. Therefore, as a cutting tool must have the properties of friction resistance, impact resistance, and have good sharpness, so that the material chosen is Ni-Hard 1. The use of centrifugal casting method was chosen because it has the advantage of being able to make castings with relatively thin thickness this is due to the influence of the centrifugal force on the distribution of metal liquids throughout the cavity in the mold. Case study in this study is the use of centrifugal casting methods as an alternative to gravity casting methods to overcome defects of misruns. This research was conducted to investigate the effect of speed on the formation of castings products. The method that was carried out began with a literature study on centrifugal casting, and continued by determining the material, the temperature of the cast is in the range 1250ºC - 1300ºC, and the type of mold. The next step is to do work drawings, pattern making, mold making, casting processes, fettling processes, and analysis. With variations in speed of 200 rpm, 300 rpm and 400 rpm, it can be seen the optimal speed for making this product. The results of this study obtained optimal speed at a speed of 300 rpm to make good quality of animal feed knife products.


Sign in / Sign up

Export Citation Format

Share Document