scholarly journals Some Investigations Performed for the Bridge Over Jiu at Aninoasa

2012 ◽  
Vol 1 (1) ◽  
pp. 50-59
Author(s):  
Ionuţ Radu Răcănel ◽  
Marian Daraban ◽  
Răzvan Stănescu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Cross Section ◽  
Element Model ◽  
Structural Elements ◽  
Static And Dynamic Analysis ◽  
Time Period ◽  
Vertical Displacements ◽  
The Finite Element Model ◽  
Test Project

Abstract The carrying structure of the bridge over the Jiu River at Aninoasa consists in two parallel concrete arches with variable height of the cross section, sustaining a concrete deck through vertical concrete hangers. In the time period passed since the bridge was erected, some structural elements shown damages. In order to establish the technical state of the bridge, a technical appraisement was performed and according to this, the most exposed elements to the risk of failure are the hangers. The purpose of this paper is to present briefly both, the method used to test the actual bridge carrying capacity in situ and the finite element model developed for the static and dynamic analysis of the structure. In order to estimate the state of the structural elements, two ways were followed. In the first stage, a test project was carried out and in the second stage, a complete 3D finite element model was developed to analyze the bridge structure. The test project has foreseen the loading of the bridge by heavy unloaded trucks, disposed in some positions on the deck and the measurements of the deck and arches displacements. The positions of the trucks were established in order to obtain the maximum values both for arches transverse displacements and vertical displacements of the deck. Using electro-resistive transducers the hangers elongations and strains values on their cross section were also measured. These measured values were compared with those obtained from the numerical calculations performed by using the complete finite element model. By means of the finite element model, also the response of the structure following the dynamic action of vehicles was investigated.

scholarly journals Sensitivity Analysis of the Influence of Structural Parameters on Dynamic Behaviour of Highly Redundant Cable-Stayed Bridges

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
B. Asgari ◽  
S. A. Osman ◽  
A. Adnan
Keyword(s):  
Sensitivity Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Model Updating ◽  
Structural Parameters ◽  
Element Model ◽  
Structural Behavior ◽  
Model Tuning ◽  
The Finite Element Model ◽  
Cable Stayed Bridges

The model tuning through sensitivity analysis is a prominent procedure to assess the structural behavior and dynamic characteristics of cable-stayed bridges. Most of the previous sensitivity-based model tuning methods are automatic iterative processes; however, the results of recent studies show that the most reasonable results are achievable by applying the manual methods to update the analytical model of cable-stayed bridges. This paper presents a model updating algorithm for highly redundant cable-stayed bridges that can be used as an iterative manual procedure. The updating parameters are selected through the sensitivity analysis which helps to better understand the structural behavior of the bridge. The finite element model of Tatara Bridge is considered for the numerical studies. The results of the simulations indicate the efficiency and applicability of the presented manual tuning method for updating the finite element model of cable-stayed bridges. The new aspects regarding effective material and structural parameters and model tuning procedure presented in this paper will be useful for analyzing and model updating of cable-stayed bridges.

Biodynamics of Human Thorax With Body Armors Subject to Bullet Impact

2001 ◽  
Author(s):  
Y. W. Kwon ◽  
J. A. Lobuono
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Body Armor ◽  
Projectile Impact ◽  
Human Thorax ◽  
Trachea And Bronchi ◽  
Armor System ◽  
The Finite Element Model

Abstract The objective of this study is to develop a finite element model of the human thorax with a protective body armor system so that the model can adequately determine the thorax’s biodynamical response from a projectile impact. The finite element model of the human thorax consists of the thoracic skeleton, heart, lungs, major arteries, major veins, trachea, and bronchi. The finite element model of the human thorax is validated by comparing the model’s results to experimental data obtained from cadavers wearing a protective body armor system undergoing a projectile impact.

Dynamic Analysis of a Turbocharger Centrifugal Compressor Impeller

1991 ◽  
Author(s):  
V. Ramamurti ◽  
D. A. Subramani ◽  
K. Sridhara
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Centrifugal Compressor ◽  
Element Model ◽  
Simplified Model ◽  
Cyclic Symmetry ◽  
Compressor Impeller ◽  
Cyclic Symmetric ◽  
The Finite Element Model

Abstract Stress analysis and determination of eigen pairs of a typical turbocharger compressor impeller have been carried out using the concept of cyclic symmetry. A simplified model treating the blade and the hub as isolated elements has also been attempted. The limitations of the simplified model have been brought out. The results of the finite element model using the cyclic symmetric approach have been discussed.

Analysis of Effective Pre-Stress of Continuous Rigid Frame Bridge in Service Based on Inversion Theory

2013 ◽  
Vol 671-674 ◽  
pp. 1012-1015
Author(s):  
Zhao Ning Zhang ◽  
Ke Xing Li
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Inversion Method ◽  
Vertical Deflection ◽  
Continuous Rigid Frame Bridge ◽  
Rigid Frame ◽  
Inversion Theory ◽  
Rigid Frame Bridge ◽  
The Finite Element Model

Due to the environment, climate, loads and other factors, the pre-stress applied to the beam is not a constant. It is important for engineers to track the state of the pre-stress in order to ensure security of the bridge in service. To solve the problem mentioned above, the paper puts forward a new way to analyze the effective pre-stress using the displacement inversion method based on the inversion theory according to the measured vertical deflection of the bridge in service at different time. The method is a feasible way to predict the effective pre-stress of the bridge in service. Lastly, taking the pre-stressed concrete continuous rigid frame bridge for example, the effective pre-stress is analyzed by establishing the finite element model.

scholarly journals Physical Principles of a Piezo Accelerometer Sensitive to a Nearly Constant Signal

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3258 ◽  
Author(s):  
Valery Gupalov ◽  
Alexander Kukaev ◽  
Sergey Shevchenko ◽  
Egor Shalymov ◽  
Vladimir Venediktov
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Frequency Band ◽  
Linear Acceleration ◽  
High Sensitivity ◽  
Element Model ◽  
Wide Frequency Band ◽  
Piezoelectric Accelerometer ◽  
The Finite Element Model ◽  
Physical Principles

The paper considers the construction of a piezoelectric accelerometer capable of measuring constant linear acceleration. A number of designs are proposed that make it possible to achieve high sensitivity with small dimensions and a wide frequency band (from 10−5 Hz). The finite element model of the proposed design was investigated, and its output characteristic and scale factor (36 mV/g) were obtained.

Analysis on sealing performance of VL seals based on mixed lubrication theory

2019 ◽  
Vol 71 (1) ◽  
pp. 54-60 ◽  
Author(s):  
Shixian Xu ◽  
Zhengtao Su ◽  
Jian Wu
Keyword(s):  
Finite Element ◽  
Film Thickness ◽  
Finite Element Model ◽  
Friction Factor ◽  
Contact Pressure ◽  
Element Model ◽  
Mixed Lubrication ◽  
Content Type ◽  
Deformation Mechanics ◽  
The Finite Element Model

Purpose This paper aims to research the influence of pressure, friction factors, roughness and actuating speed to the mixed lubrication models of outstroke and instroke. Design/methodology/approach Mixed lubrication model is solved by finite volume method, which consists of coupled fluid mechanics, deformation mechanics and contact mechanics analyses. The influence of friction factor on the finite element model is also considered. Then, contact pressure, film thickness, friction and leakage have been studied. Findings It was found that the amount of leakage is sensitive to the film thickness. The larger the film thickness is, the greater the influence received from the friction factor, however, the effect of oil film on the friction is negligible. The friction is determined mainly by the contact pressure. The trend of friction and leakage influenced by actuating velocity and roughness is also obtained. Originality/value The influence of friction factor on the finite element model is considered. This can make the calculation more accurate.

scholarly journals Co-Simulation of an Inverter Fed Permanent Magnet Synchronous Machine

2014 ◽  
Vol 6 (1) ◽  
pp. 19-25
Author(s):  
Gergely Máté Kiss ◽  
István Vajda
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Analytical Model ◽  
Element Model ◽  
Electrical Machine ◽  
Permanent Magnet Synchronous Machine ◽  
Variable Speed ◽  
Analytical Variable ◽  
Drive Model ◽  
The Finite Element Model

Abstract Co-simulation is a method which makes it possible to study the electric machine and its drive at once, as one system. By taking into account the actual inverter voltage waveforms in a finite element model instead of using only the fundamental, we are able to study the electrical machine's behavior in more realistic scenario. The recent increase in the use of variable speed drives justifies the research on such simulation techniques. In this paper we present the co-simulation of an inverter fed permanent magnet synchronous machine. The modelling method employs an analytical variable speed drive model and a finite element electrical machine model. By linking the analytical variable speed drive model together with a finite element model the complex simulation model enables the investigation of the electrical machine during actual operation. The methods are coupled via the results. This means that output of the finite element model serves as an input to the analytical model, and the output of the analytical model provides the input of the finite element model for a different simulation, thus enabling the finite element simulation of an inverter fed machine. The resulting speed and torque characteristics from the analytical model and the finite element model show a good agreement. The experiences with the co-simulation technique encourage further research and effort to improve the method.

scholarly journals INFLUENCE OF CURVED WEB CLOSED STEEL SECTIONS IN BRIDGE DESIGN

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Gilles Van Staen ◽  
Hans De Backer ◽  
Philippe Van Bogaert
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Urban Area ◽  
Element Model ◽  
Structural Elements ◽  
Railway Bridge ◽  
Bridge Design ◽  
Steel Sections ◽  
Steel Panels ◽  
Closed Steel

A bridge is nowadays more than a structure that connects people over an obstacle. When a bridge has to be built in an urban area, either it has to be a landmark or it should blend away in the environment. The use of curved steel panels is one option to obtain these requirements. However, due to a lack of knowledge, engineers end up with a conservative design to implement these structural elements. For that reason, a Finite Element Model is made of a railway bridge, where the outer webs of the main girders have a varying web curvature. Six different models are made and compared. The most important parameters that are compared are the deformations and the stresses in the webs. The study finds that curved webs have an equal or even better behavior than flat webs, even with smaller web thickness. This makes that designers can use curved webs in their design, without needing extra steel to make their design safe.

scholarly journals Investigation on aerodynamic characteristics of bionic membrane nano rotor

2021 ◽  
Vol 18 ◽  
pp. 175682932110433
Author(s):  
Shanyong Zhao ◽  
Zhen Liu ◽  
Ke Lu ◽  
Dacheng Su ◽  
Shangjing Wu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Structural Parameters ◽  
Element Model ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Performance ◽  
Dynamics Model ◽  
Interaction Method ◽  
Calculation Results ◽  
The Finite Element Model

In this paper, the bionic membrane structure is introduced to improve the aerodynamic performance of nano rotor at the low Reynolds number. The aerodynamic characteristics of nano rotor made of hyperelastic material as membrane blades are studied. Firstly, based on the hyperelastic constitutive model, a finite element model of the rotor is established and compared with the results of the modal test to verify the accuracy of the model. Then the computational fluid dynamics model of membrane nano rotor is established which combined with the finite element model. The aerodynamic characteristics of the membrane rotor under hovering conditions are studied using fluid–structure interaction method. It is found that the calculation results matched well with the experiment results. The design of the structural parameters such as the membrane proportion, shape, and position of the membrane rotor is optimized. The influence of each parameter on the aerodynamic performance of the rotor is obtained. Under certain structural conditions, the performance can be effectively improved, which provides a new idea for the design of the nano rotor.

Sign in / Sign up

Export Citation Format

Share Document