scholarly journals Synthesis Gas from Pyrolysed Plastics for Combustion Engine

2015 ◽  
Vol 23 (1) ◽  
pp. 18-24
Author(s):  
Andrej Chríbik ◽  
Marián Polóni ◽  
Ján Lach ◽  
Ľubomír Jančošek ◽  
Peter Kunc ◽  
...  
Keyword(s):  
Natural Gas ◽  
Synthesis Gas ◽  
Combustion Engine ◽  
Petrol Engine ◽  
Experimental Measurements ◽  
Internal Parameters

Abstract The article discusses the application of synthesis gas from pyrolysis of plastics in petrol engine. The appropriate experimental measurements were performed on a combustion engine LGW 702 designated for micro-cogeneration unit. The power parameters, economic and internal parameters of the engine were compared to the engine running on the reference fuel - natural gas and synthesis gas. Burning synthesis gas leads to decreased performance by about 5% and to increased mass hourly consumption by 120%. In terms of burning, synthesis gas has similar properties as natural gas. More significant changes are observed in even burning of fuel in consecutive cycles.

scholarly journals Internal Combustion Engine Powered by Synthesis Gas from Pyrolysed Plastics

2016 ◽  
Vol 66 (1) ◽  
pp. 37-46
Author(s):  
Andrej Chríbik ◽  
Marián Polóni ◽  
Ján Lach ◽  
Ľubomír Jančošek ◽  
Peter Kunc ◽  
...  
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engine ◽  
Synthesis Gas ◽  
Combustion Engine ◽  
Experimental Measurements ◽  
Brake Specific Fuel Consumption ◽  
Engine Torque ◽  
Internal Parameters ◽  
Detailed Assessment ◽  
Engine Cycle

AbstractThe article discusses the application of synthesis gas from pyrolysis of plastics in petrol engine. The appropriate experimental measurements were performed on a combustion engine LGW 702 designated for micro-cogeneration unit. The power parameters, economic parameters in term of brake specific fuel consumption, and internal parameters of the engine were compared to the engine running on the reference fuel - natural gas and synthesis gas. Burning synthesis gas leads to decreased performance by about 5% and to increased mass hourly consumption by 120 %. In terms of burning, synthesis gas has similar properties as natural gas. Compared with [5] a more detailed study has been prepared on the effects of angle of spark advance on the engine torque, giving more detailed assessment of engine cycle variability and considering specification of start and end of combustion in the logarithm p-V diagram.

scholarly journals Influence of Selected Synthesis Gas Component on Internal Parameters of Combustion Engine

2019 ◽  
Vol 69 (4) ◽  
pp. 25-32
Author(s):  
Chríbik Andrej ◽  
Polóni Marián ◽  
Minárik Matej
Keyword(s):  
Carbon Monoxide ◽  
Synthesis Gas ◽  
Combustion Engine ◽  
Pressure Rise ◽  
Engine Performance ◽  
Maximum Pressure ◽  
Operating Modes ◽  
Internal Parameters ◽  
Rise Rate ◽  
Methane Mixture

AbstractThe paper deals with the influence of selected component of synthesis gas on internal parameters of combustion engine that is planned to be used in micro-cogeneration unit. The aim is to better understand the mechanism of combustion of carbon monoxide mixed with methane and as a follow-up to optimize the operation of the Lombardini LGW 702 engine on change of fuel composition. Generally, an increasing proportion of carbon monoxide in methane mixture leads to a decrease in engine performance (mean indicated pressure) and the hourly fuel consumption in each of the operating modes of the engine increases. With growing proportion of CO in mixture with CH4, the maximum pressure in the cylinder increases together with pressure rise rate up to approximately 10 % vol. of CH4. With further increasing proportion of CH4, there is a significant decrease of the before-mentioned engine parameters. The optimum ignition angle for pure methane, or carbon monoxide, does not change significantly and it is about 27° CA BTDC.

Effect of Chemical Hythane Composition on Pressure in Combustion Chamber of Engine

2019 ◽  
pp. 36-42
Author(s):  
A. P. Shaikin ◽  
I. R. Galiev
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Power Plants ◽  
Engine Speed ◽  
Combustion Engine ◽  
Fuel Mixture ◽  
Maximum Pressure ◽  
Chamber Volume ◽  
Excess Air ◽  
Scientific Papers

The article analyzes the influence of chemical composition of hythane (a mixture of natural gas with hydrogen) on pressure in an engine combustion chamber. A review of the literature has showed the relevance of using hythane in transport energy industry, and also revealed a number of scientific papers devoted to studying the effect of hythane on environmental and traction-dynamic characteristics of the engine. We have studied a single-cylinder spark-ignited internal combustion engine. In the experiments, the varying factors are: engine speed (600 and 900 min-1), excess air ratio and hydrogen concentration in natural gas which are 29, 47 and 58% (volume).The article shows that at idling engine speed maximum pressure in combustion chamber depends on excess air ratio and proportion hydrogen in the air-fuel mixture – the poorer air-fuel mixture and greater addition of hydrogen is, the more intense pressure increases. The positive effect of hydrogen on pressure is explained by the fact that addition of hydrogen contributes to increase in heat of combustion fuel and rate propagation of the flame. As a result, during combustion, more heat is released, and the fuel itself burns in a smaller volume. Thus, the addition of hydrogen can ensure stable combustion of a lean air-fuel mixture without loss of engine power. Moreover, the article shows that, despite the change in engine speed, addition of hydrogen, excess air ratio, type of fuel (natural gas and gasoline), there is a power-law dependence of the maximum pressure in engine cylinder on combustion chamber volume. Processing and analysis of the results of the foreign and domestic researchers have showed that patterns we discovered are applicable to engines of different designs, operating at different speeds and using different hydrocarbon fuels. The results research presented allow us to reduce the time and material costs when creating new power plants using hythane and meeting modern requirements for power, economy and toxicity.

Cooling through heat pumps powered by a combustion engine for natural gas

2014 ◽  
Author(s):  
Martina Janovcová ◽  
Jozef Jandačka ◽  
Roman Kiš
Keyword(s):  
Natural Gas ◽  
Combustion Engine ◽  
Heat Pumps

scholarly journals Temperature parameters in the combustion chambers of CUMMINS KTA-50 engines operating on various fuels under different fuel consumption rates

2021 ◽  
Vol 315 ◽  
pp. 03011
Author(s):  
Georgiy Dubov ◽  
Alexander Bogomolov ◽  
Sergey Azikhanov ◽  
Pavel Strelnikov ◽  
Sergey Nokhrin
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
Combustion Engine ◽  
Energy Charge ◽  
Motor Fuel ◽  
Liquefied Natural Gas ◽  
Open Pit ◽  
Mining Equipment ◽  
Evaporator Temperature ◽  
Dump Trucks

The issue of a comparative study of fuel consumption and temperature characteristics of gas-diesel BelAZ 75131 mining dump trucks equipped with an on-board cryogenic fuel system and hauling rock mass at the Kuzbass open-pit coal mine is considered in the article. A brief analysis of the efficiency of using liquefied natural gas (LNG) - methane - as a motor fuel for mining dump trucks is carried out. It is noted that the use of LNG fuel for heavy-duty dump trucks is one of the most promising ways to improve the environmental and economic performance during the operation of this type of mining equipment. The technique and instrumental base for conducting research are presented. The relationship between natural ratios of diesel fuel replacement with natural gas and the energy charge of these replacement is studied. The following data are presented: data on the consumption of vaporous (gaseous superheated) natural gas (hereinafter gaseous natural gas) during field operation of gas-diesel BelAZ 75131 mining dump trucks; flow rate of gaseous natural gas in pipelines; consumption of antifreeze at the inlet to the liquefied natural gas evaporator, as well as antifreeze temperature at the inlet and outlet of the evaporator; temperature of gaseous natural gas at the outlet of the reducer after the evaporator; data on the comparison of temperature profiles in the cylinders of CUMMINS KTA 50 internal combustion engine under diesel and gas-diesel operation.

Evaluation of Spark Plug and Timing Configurations on the Fuel Consumption, Combustion Stability, and Emissions of a Large-Bore, Two-Stroke, Natural Gas Engine

2016 ◽  
Author(s):  
Derek Johnson ◽  
Marc Besch ◽  
Nathaniel Fowler ◽  
Robert Heltzel ◽  
April Covington
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
Combustion Engine ◽  
Engine Performance ◽  
Combustion Stability ◽  
Oxides Of Nitrogen ◽  
Natural Gas Engines ◽  
Fuel Delivery ◽  
Spark Plug ◽  
Trade Offs

Emissions compliance is a driving factor for internal combustion engine research pertaining to both new and old technologies. New standards and compliance requirements for off-road spark ignited engines are currently under review and include greenhouse gases. To continue operation of legacy natural gas engines, research is required to increase or maintain engine efficiency, while reducing emissions of carbon monoxide, oxides of nitrogen, and volatile organic compounds such as formaldehyde. A variety of technologies can be found on legacy, large-bore natural gas engines that allow them to meet current emissions standards — these include exhaust after-treatment, advanced ignition technologies, and fuel delivery methods. The natural gas industry uses a variety of spark plugs and tuning methods to improve engine performance or decrease emissions of existing engines. The focus of this study was to examine the effects of various spark plug configurations along with spark timing to examine any potential benefits. Spark plugs with varied electrode diameter, number of ground electrodes, and heat ranges were evaluated against efficiency and exhaust emissions. Combustion analyses were also conducted to examine peak firing pressure, location of peak firing pressure, and indicated mean effective pressure. The test platform was an AJAX-E42 engine. The engine has a bore and stroke of 0.216 × 0.254 meters (m), respectively. The engine displacement was 9.29 liters (L) with a compression ratio of 6:1. The engine was modified to include electronic spark plug timing capabilities along with a mass flow controller to ensure accurate fuel delivery. Each spark plug configuration was examined at ignition timings of 17, 14, 11, 8, and 5 crank angle degrees before top dead center. The various configurations were examined to identify optimal conditions for each plug comparing trade-offs among brake specific fuel consumption, oxides of nitrogen, methane, formaldehyde, and combustion stability.

Sign in / Sign up

Export Citation Format

Share Document