scholarly journals The Impact of Variables on Particle Size of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers; A Comparative Literature Review

2016 ◽  
Vol 6 (2) ◽  
pp. 143-151 ◽  
Author(s):  
Leila Azhar Shekoufeh Bahari ◽  
Hamed Hamishehkar
Keyword(s):  
Particle Size ◽  
Comparative Literature ◽  
Literature Review ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid ◽  
The Impact

scholarly journals Development of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers of Loteprednol Etabonate: Physicochemical Characterization and Ex Vivo Permeation Studies

2021 ◽  
Author(s):  
Burcu Üner ◽  
Samet Özdemir ◽  
Çetin Taş ◽  
Yıldız Özsoy ◽  
Melike Üner
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Fickian Diffusion ◽  
Control Group ◽  
Loteprednol Etabonate ◽  
Solid Lipid

Abstract Purpose Loteprednol etabonate (LE) is a new generation corticosteroid that is used for the treatment of inflammatory and allergic conditions of the eye, and management of seasonal allergic rhinitis nasally. LE which is a poorly soluble drug with insufficient bioavailability, has a high binding affinity to steroid receptors. Sophisticated colloidal drug delivery systems of LE could present an alternative for treatment of inflammatory and allergic conditions of the skin. For this purpose, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were attempted to improve for transdermal LE delivery for the first time. Methods SLN and NLC were produced by hot homogenization and ultrasonication technique. Formulations were characterized by dynamic light scattering, scanning electron microscopy, fourier transform infrared spectroscopy and differential scanning calorimetry. Their physical stability was monitored for 3 months of storage. Drug release profiles and permeation properties of SLN and NLC through the porcine skin were investigated. Results It was determined that SLN and NLC below 150 nm particle size had a homogeneous particle size distribution as well as high drug loading capacities. They were found to be stable both physically and chemically at room temperature for 90 days. In terms of release kinetics, it was determined that they released from SLN and NLC in accordance with Fickian diffusion release. Formulations prepared in this study were seen to significantly increase drug penetration through pig skin compared to the control group (p ≤ 0.05). Conclusion SLN and NLC formulations of LE can be stated among the systems that can be an alternative to conventional systems with less side-effect profile in the treatment of inflammatory problems on the skin.

scholarly journals Evaluation and Comparison of Solid Lipid Nanoparticles (SLNs) and Nanostructured Lipid Carriers (NLCs) as Vectors to Develop Hydrochlorothiazide Effective and Safe Pediatric Oral Liquid Formulations

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 437
Author(s):  
Paola Mura ◽  
Francesca Maestrelli ◽  
Mario D’Ambrosio ◽  
Cristina Luceri ◽  
Marzia Cirri
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physical Stability ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Particle Size Reduction ◽  
Solid Lipid ◽  
Oral Liquid

The aim of this study was the optimization of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in terms of physicochemical and biopharmaceutical properties, to develop effective and stable aqueous liquid formulations of hydrochlorothiazide, suitable for paediatric therapy, overcoming its low-solubility and poor-stability problems. Based on solubility studies, Precirol® ATO5 and Transcutol® HP were used as solid and liquid lipids, respectively. The effect of different surfactants, also in different combinations and at different amounts, on particle size, homogeneity and surface-charge of nanoparticles was carefully investigated. The best formulations were selected for drug loading, and evaluated also for entrapment efficiency and release behaviour. For both SLN and NLC series, the use of Gelucire® 44/14 as surfactant rather than PluronicF68 or Tween® 80 yielded a marked particle size reduction (95–75 nm compared to around 600–400 nm), and an improvement in entrapment efficiency and drug release rate. NLC showed a better performance than SLN, reaching about 90% entrapped drug (vs. 80%) and more than 90% drug released after 300 min (vs. about 65%). All selected formulations showed good physical stability during 6-month storage at 4 °C, but a higher loss of encapsulated drug was found for SLNs (15%) than for NLCs (<5%). Moreover, all selected formulations revealed the absence of any cytotoxic effect, as assessed by a cell-viability test on Caco-2 cells and are able to pass the intestinal epithelium as suggested by Caco-2 uptake experiments.

scholarly journals Preparation, In Vitro characterization and stability studies of ropinirole lipid nanoparticles enriched hydrogel for treatment of neurodegeneration diseases

2021 ◽  
Vol 11 (2-S) ◽  
pp. 66-75
Author(s):  
Kumara Swamy Samanthula ◽  
Ramesh Alli ◽  
Thirupathi Gorre
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid ◽  
Release Studies ◽  
Vitro Release

Ropinirole (RP), is a selective dopamine agonist that is used alone or with other medications to treat the symptoms of Parkinson’s disease (PD). RP has low bioavailability of only about 50% due to the first-pass metabolism, and it requires frequent dosing during oral administration. The objective of the current research was to develop RP loaded solid lipid nanoparticles (RP-SLNs), nanostructured lipid carriers (RP-NLCs), and their corresponding hydrogels (RP-SLN-C and RP-NLC-C) that might improve efficacy in PD treatment. RP nanoparticles were prepared by homogenization aided probe sonication method and optimized based on particle size, polydispersity index (PDI), zeta potential (ZP), assay, entrapment efficiency, and in vitro release studies. Optimized formulations were converted to hydrogel formulations using Carbopol 934 as a gelling polymer and optimized based on rheological and release characteristics. Optimized formulations were further evaluated using differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), freeze-drying, and stability study at refrigerated and room temperatures. The optimized RP-SLN formulation showed particle size and entrapment efficiency of 213.5±3.8 nm and 77.9±3.1% compared to 190.6±3.7 nm and 85.7±1.7% for optimized RP-NLC formulation. PXRD supplemented and confirmed DSC results, RP was entrapped in a molecularly dispersed state inside the core of the lipid nanocarrier. Furthermore, RP loaded lipid nanocarriers revealed a spherical shape in SEM images. In vitro release studies demonstrated sustained release profiles for RP from SLNs, NLCs, and their hydrogels over 24 h and were stable over three months at 4ºC and 25ºC storage conditions. Keywords: Parkinson’s disease, Ropinirole, Solid lipid nanoparticles, Nanostructured lipid carriers, Hydrogel.

Preparation, Characterization and In-vitro release of Piroxicam-loaded Solid Lipid Nanoparticles

2010 ◽  
Vol 3 (3) ◽  
pp. 1136-1146
Author(s):  
V K Verma ◽  
Ram A
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Diffusion Method ◽  
Solid Lipid ◽  
Vitro Release

 Solid lipid nanoparticles (SLNs) of piroxicam where produced by solvent emulsification diffusion method in a solvent saturated system. The SLNs where composed of tripamitin lipid, polyvinyl alcohol (PVAL) stabilizer, and solvent ethyl acetate. All the formulation were subjected to particle size analysis, zeta potential, drug entrapment efficiency, percent drug loading determination and in-vitro release studies. The SLNs formed were nano-size range with maximum entrapment efficiency. Formulation with 435nm in particle size and 85% drug entrapment was subjected to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for surface morphology, differential scanning calorimetry (DSC) for thermal analysis and short term stability studies. SEM and TEM confirm that the SLNs are nanometric size and circular in shape. The drug release behavior from SLNs suspension exhibited biphasic pattern with an initial burst and prolong release over 24 h. 

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Solid Lipid Nanoparticles and Nanostructured Lipid Carriers: A Review

2011 ◽  
Vol 6 (4) ◽  
pp. 240-250 ◽  
Author(s):  
Rajashree Hirlekar ◽  
Harshal Garse ◽  
Vilasrao Kadam
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Solid Lipid

Optimization of Solid Lipid Nanoparticles of Ezetimibe in Combination with Simvastatin Using Quality by Design (QbD)

2020 ◽  
Vol 10 (4) ◽  
pp. 404-418
Author(s):  
Kruti Borderwala ◽  
Ganesh Swain ◽  
Namrata Mange ◽  
Jaimini Gandhi ◽  
Manisha Lalan ◽  
...  
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
High Speed ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Water Soluble ◽  
Lipid Matrix ◽  
Solid Lipid ◽  
32 Factorial Design ◽  
Full Factorial Experimental Design

Background: The objective of this study was to develop solid lipid nanoparticles (SLNs) of poorly water soluble anti-hyperlipidemic drugs-Ezetimibe in combination with Simvastatin. Methods: This study describes a 32 full factorial experimental design to optimize the formulation of drug loaded lipid nanoparticles (SLN) by the high speed homogenization technique. The independent variables amount of lipid (GMS) and amount of surfactant (Poloxamer 188) were studied at three levels and arranged in a 32 factorial design to study the influence on the response variables- particle size, % entrapment efficiency (%EE) and cumulative drug release (% CDR) at 24 h. Results: The particle size, % EE and % CDR at 24 h for the 9 batches (B1 to B9) showed a wide variation of 104.6-496.6 nm, 47.80-82.05% (Simvastatin); 48.60-84.23% (Ezetimibe) and 54.64-92.27% (Simvastatin); 43.8-97.1% (Ezetimibe), respectively. The responses of the design were analysed using Design Expert 10.0.2. (Stat-Ease, Inc, USA), and the analytical tools of software were used to draw response surface plots. From the statistical analysis of data, polynomial equations were generated. Optimized formulation showed particle size of 169.5 nm, % EE of 75.43% (Simvastatin); 79.10% (Ezetimibe) and 74.13% (Simvastatin); 77.11% (Ezetimibe) %CDR after 24 h. Thermal analysis of prepared solid lipid nanoparticles gave indication of solubilisation of drugs within lipid matrix. Conclusion: Fourier Transformation Infrared Spectroscopy (FTIR) showed the absence of new bands for loaded solid lipid nanoparticles indicating no interaction between drugs and lipid matrix and being only dissolved in it. Electron microscope of transmission techniques indicated sphere form of prepared solid lipid nanoparticles with smooth surface with size approximately around 100 nm.

scholarly journals In Vitro Studies on Nasal Formulations of Nanostructured Lipid Carriers (NLC) and Solid Lipid Nanoparticles (SLN)

2021 ◽  
Vol 14 (8) ◽  
pp. 711
Author(s):  
Cláudia Pina Costa ◽  
Sandra Barreiro ◽  
João Nuno Moreira ◽  
Renata Silva ◽  
Hugo Almeida ◽  
...  
Keyword(s):  
Nasal Cavity ◽  
Solid Lipid Nanoparticles ◽  
Local Treatment ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
In Vitro Studies ◽  
Brain Diseases ◽  
In Vivo Studies ◽  
Solid Lipid

The nasal route has been used for many years for the local treatment of nasal diseases. More recently, this route has been gaining momentum, due to the possibility of targeting the central nervous system (CNS) from the nasal cavity, avoiding the blood−brain barrier (BBB). In this area, the use of lipid nanoparticles, such as nanostructured lipid carriers (NLC) and solid lipid nanoparticles (SLN), in nasal formulations has shown promising outcomes on a wide array of indications such as brain diseases, including epilepsy, multiple sclerosis, Alzheimer’s disease, Parkinson’s disease and gliomas. Herein, the state of the art of the most recent literature available on in vitro studies with nasal formulations of lipid nanoparticles is discussed. Specific in vitro cell culture models are needed to assess the cytotoxicity of nasal formulations and to explore the underlying mechanism(s) of drug transport and absorption across the nasal mucosa. In addition, different studies with 3D nasal casts are reported, showing their ability to predict the drug deposition in the nasal cavity and evaluating the factors that interfere in this process, such as nasal cavity area, type of administration device and angle of application, inspiratory flow, presence of mucoadhesive agents, among others. Notwithstanding, they do not preclude the use of confirmatory in vivo studies, a significant impact on the 3R (replacement, reduction and refinement) principle within the scope of animal experiments is expected. The use of 3D nasal casts to test nasal formulations of lipid nanoparticles is still totally unexplored, to the authors best knowledge, thus constituting a wide open field of research.

Sign in / Sign up

Export Citation Format

Share Document