Akira Tagaya (2019) Tetrachoric correlation of bilateral nonmetric traits: a defect in the conventional procedure and a proposal for two alternative estimation methods. Anthropological Science, 127(1): 39–45.

The very thin (<100 Å) InGaAsP layers were grown not only by molecular beam epitaxy and metal-organic chemical vapor deposition but recently also by simple liquid phase epitaxy (LPE) technique. Characterization of their thickness, interfase abruptness and lattice defects is important and requires TEM methods to be used.The samples were InGaAsP/InGaP double heterostructures grown on (111)A GaAs substrate. The exact growth conditions are described in Ref.1. The salient points are that the quarternary layers were being grown at 750°C during a fast movement of substrate and a convection caused in the melt by that movement was eliminated. TEM cross-section specimens were prepared by means of conventional procedure. The studies were conducted in EM 420T and JEM 4000EX instruments.The (200) dark-field cross-sectional imaging is the most appropriate TEM technique to distinguish between individual layers in 111-v semiconductor heterostructures.

Download Full-text

The Impact of Missing and Error-Prone Auxiliary Information on Sparse-Matrix Sub-Population Parameter Estimates

Methodology ◽

10.1027/1614-2241/a000095 ◽

2015 ◽

Vol 11 (3) ◽

pp. 89-99 ◽

Cited By ~ 1

Author(s):

Leslie Rutkowski ◽

Yan Zhou

Keyword(s):

Sparse Matrix ◽

Small Body ◽

Auxiliary Information ◽

Poor Quality ◽

Quality Data ◽

Estimation Methods ◽

Parameter Estimates ◽

Population Parameter ◽

Conditioning Model ◽

The Impact

Abstract. Given a consistent interest in comparing achievement across sub-populations in international assessments such as TIMSS, PIRLS, and PISA, it is critical that sub-population achievement is estimated reliably and with sufficient precision. As such, we systematically examine the limitations to current estimation methods used by these programs. Using a simulation study along with empirical results from the 2007 cycle of TIMSS, we show that a combination of missing and misclassified data in the conditioning model induces biases in sub-population achievement estimates, the magnitude and degree to which can be readily explained by data quality. Importantly, estimated biases in sub-population achievement are limited to the conditioning variable with poor-quality data while other sub-population achievement estimates are unaffected. Findings are generally in line with theory on missing and error-prone covariates. The current research adds to a small body of literature that has noted some of the limitations to sub-population estimation.

Download Full-text

A simulation study of single-trial ERP latency estimation methods

PsycEXTRA Dataset ◽

10.1037/e526132012-306 ◽

1996 ◽

Author(s):

Kevin M. Spencer ◽

Emanuel Donchin

Keyword(s):

Simulation Study ◽

Estimation Methods ◽

Single Trial

Download Full-text

Tetrachoric Correlation Methods for Multidimensional Signal Detection Theory

PsycEXTRA Dataset ◽

10.1037/e633262013-893 ◽

2013 ◽

Author(s):

Leslie M. Blaha ◽

Tamaryn Menneer ◽

Michael J. Wenger

Keyword(s):

Signal Detection ◽

Signal Detection Theory ◽

Detection Theory ◽

Tetrachoric Correlation ◽

Correlation Methods ◽

Multidimensional Signal

Download Full-text

Femtocell Selection Scheme for Reducing Unnecessary Handover and Enhancing Downlink QoS in Cognitive Femtocell Networks

Research and Development on Information and Communication Technology ◽

10.32913/rd-ict.vol3.no14.536 ◽

2017 ◽

Author(s):

Hoang Nhu Dong ◽

Hoang Nam Nguyen ◽

Hoang Trong Minh ◽

Takahiko Saba

Keyword(s):

Cellular Networks ◽

Estimation Methods ◽

Mobility Prediction ◽

Capacity Estimation ◽

Femtocell Networks ◽

Selection Scheme ◽

Indoor Communications ◽

Performance Results ◽

Cognitive Femtocell

Femtocell networks have been proposed for indoor communications as the extension of cellular networks for enhancing coverage performance. Because femtocells have small coverage radius, typically from 15 to 30 meters, a femtocell user (FU) walking at low speed can still make several femtocell-to-femtocell handovers during its connection. When performing a femtocell-to-femtocell handover, femtocell selection used to select the target handover femtocell has to be able not only to reduce unnecessary handovers and but also to support FU’s quality of service (QoS). In the paper, we propose a femtocell selection scheme for femtocell-tofemtocell handover, named Mobility Prediction and Capacity Estimation based scheme (MPCE-based scheme), which has the advantages of the mobility prediction and femtocell’s available capacity estimation methods. Performance results obtained by computer simulation show that the proposed MPCE-based scheme can reduce unnecessary femtocell-tofemtocell handovers, maintain low data delay and improve the throughput of femtocell users. DOI: 10.32913/rd-ict.vol3.no14.536

Download Full-text

Biorefinery implementation for recovery debottlenecking at existing pulp mills- Part II: Techno-economic evaluation

TAPPI Journal ◽

10.32964/tj11.8.17 ◽

2012 ◽

Vol 11 (8) ◽

pp. 17-24 ◽

Cited By ~ 1

Author(s):

HAKIM GHEZZAZ ◽

LUC PELLETIER ◽

PAUL R. STUART

Keyword(s):

Cost Estimation ◽

Process Model ◽

Black Liquor ◽

Pulp Mill ◽

Value Added ◽

Economic Assessment ◽

Extraction Process ◽

Estimation Methods ◽

Precipitation Process

The evaluation and process risk assessment of (a) lignin precipitation from black liquor, and (b) the near-neutral hemicellulose pre-extraction for recovery boiler debottlenecking in an existing pulp mill is presented in Part I of this paper, which was published in the July 2012 issue of TAPPI Journal. In Part II, the economic assessment of the two biorefinery process options is presented and interpreted. A mill process model was developed using WinGEMS software and used for calculating the mass and energy balances. Investment costs, operating costs, and profitability of the two biorefinery options have been calculated using standard cost estimation methods. The results show that the two biorefinery options are profitable for the case study mill and effective at process debottlenecking. The after-tax internal rate of return (IRR) of the lignin precipitation process option was estimated to be 95%, while that of the hemicellulose pre-extraction process option was 28%. Sensitivity analysis showed that the after tax-IRR of the lignin precipitation process remains higher than that of the hemicellulose pre-extraction process option, for all changes in the selected sensitivity parameters. If we consider the after-tax IRR, as well as capital cost, as selection criteria, the results show that for the case study mill, the lignin precipitation process is more promising than the near-neutral hemicellulose pre-extraction process. However, the comparison between the two biorefinery options should include long-term evaluation criteria. The potential of high value-added products that could be produced from lignin in the case of the lignin precipitation process, or from ethanol and acetic acid in the case of the hemicellulose pre-extraction process, should also be considered in the selection of the most promising process option.

Download Full-text