scholarly journals Corrosion of titanium implants and connected prosthetic alloys using lactic acid immersion test

2020 ◽  
Vol 11 (3) ◽  
pp. 86-92 ◽  
Author(s):  
Wilhelm Niedermeier ◽  
Katrin Huesker
Keyword(s):  
Lactic Acid ◽  
Metal Ion ◽  
Immersion Test ◽  
Titanium Implants ◽  
Ion Release ◽  
Icp Ms ◽  
Metal Ion Release ◽  
Optical Examination ◽  
Fine Gold

Background/purpose: Combination of dental titanium implants with other prosthetic metallic components may lead to metal ion release that increases the risk of adverse reactions in patients. The present study therefore aimed to determine in vitro metal ion dissolution from different alloy combinations. Materials and methods: Dental alloys were subjected to a lactic acid immersion test together with titanium implants and matched with controls. Between day 1 and 38, open direct current potentials (DCP) between the samples and the electrolyte were recorded and metal dissociation inside the electrolyte was assessed using ICP-MS. Results: Absolute DCPs of the different alloys increased significantly (p<0.001) from 100-150mV to 490-580 mV within the first two weeks of immersion, dropping to about 450mV later on largely independent of the material. Titanium showed highest dissociation rates (2.00-12.06µg/cm2 per day; p=0.0002); all other components demonstrated poor corrosive dissolution (<0.6µg/cm2 per day). After immersion of 38 days, titanium still yielded high dissociation (0.64-1.38µg/cm2 per day) for all test groups. Presence of fine gold inside the electrolyte significantly increased dissociation of titanium (p=0.027). Dissociation of iron indicated contamination from tool components used for implant production. Optical examination of non-precious metal surfaces showed no corrosive discoloration after 5 or 26 weeks of lactic acid immersion. Conclusion: Within the limitations of this study, there is no objection against the use of non-precious alloys for the fabrication of components and prostheses supported on titanium implants if gold is not present inside the same electrolyte.

scholarly journals A Literature Review Study on Atomic Ions Dissolution of Titanium and Its Alloys in Implant Dentistry

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 368 ◽  
Author(s):  
Sammy Noumbissi ◽  
Antonio Scarano ◽  
Saurabh Gupta
Keyword(s):  
Dental Implants ◽  
Metal Ion ◽  
Titanium Implants ◽  
In Vitro Studies ◽  
Ion Release ◽  
Term Survival ◽  
Metal Ion Release

This review of literature paper was done in order to conduct a review of the literature and an assessment of the effects of titanium implant corrosion on peri-implant health and success in the oral environment. This paper evaluates and critically reviews the findings of the multiple in-depth in vivo and in vitro studies that are related to corrosion aspects of the titanium and its alloys. A literature survey was conducted by electronic search in Medline and studies that were published between 1940 and August 2018 were selected. The search terms used were types of corrosion, corrosion of titanium implants, titanium corrosion, metal ion release from the titanium implants, fretting and pitting corrosion, implant corrosion, peri implantitis, and corrosion. Both in vivo and in vitro studies were also included in the review. The search and selection resulted in 64 articles. These articles were divided on the basis of their context to different kinds of corrosion related to titanium dental implants. It is evident that metal ions are released from titanium and titanium alloy dental implants as a result of corrosion. Corrosion of implants is multifactorial, including electrical, chemical, and mechanical factors, which have an effect on the peri-implant tissues and microbiota. The literature surveyed showed that corrosion related to titanium and its alloys has an effect on the health of peri-implant soft and hard tissue and the long term survival of metal dental implants. It can be concluded that presence of the long-term corrosion reaction along with continuous corrosion leads to the release of ions into the peri-implant tissue but also to a disintegration of the implant that contribute to material fatigue and even fracture of the abutments and implant body or both. This combined impact of the corrosion, bacterial activity, chemical reactions, and functional stresses are to be looked at as important factors of implant failure. The findings can be used to explore the possible strategies of research to investigate the biological impact of implant materials.

scholarly journals Bioactive Plasma Coatings on Orthodontic Brackets: In Vitro Metal Ion Release and Cytotoxicity

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 857
Author(s):  
Lasni Samalka Kumarasinghe ◽  
Neethu Ninan ◽  
Panthihage Ruvini Lakshika Dabare ◽  
Alex Cavallaro ◽  
Esma J. Doğramacı ◽  
...  
Keyword(s):  
Metal Ion ◽  
Prolonged Exposure ◽  
Orthodontic Brackets ◽  
Plasma Polymer ◽  
Functional Coatings ◽  
Key Factors ◽  
Ion Release ◽  
Metal Ion Release ◽  
Surface Functionalisation

The metal ion release characteristics and biocompatibility of meta-based materials are key factors that influence their use in orthodontics. Although stainless steel-based alloys have gained much interest and use due to their mechanical properties and cost, they are prone to localised attack after prolonged exposure to the hostile oral environment. Metal ions may induce cellular toxicity at high dosages. To circumvent these issues, orthodontic brackets were coated with a functional nano-thin layer of plasma polymer and further immobilised with enantiomers of tryptophan. Analysis of the physicochemical properties confirmed the presence of functional coatings on the surface of the brackets. The quantification of metal ion release using mass spectrometry proved that plasma functionalisation could minimise metal ion release from orthodontic brackets. Furthermore, the biocompatibility of the brackets has been improved after functionalisation. These findings demonstrate that plasma polymer facilitated surface functionalisation of orthodontic brackets is a promising approach to reducing metal toxicity without impacting their bulk properties.

11 Understanding the Clinical Performance of Ceramic Coated Femoral Components in Knee Arthroplasty Surgery

2021 ◽  
Vol 108 (Supplement_6) ◽  
Author(s):  
H Khatkar ◽  
M Prokopenko
Keyword(s):  
Knee Arthroplasty ◽  
Metal Ion ◽  
Clinical Performance ◽  
Ceramic Coatings ◽  
Wear Properties ◽  
Ion Release ◽  
Metal Ion Release ◽  
Knee Arthroplasty Surgery ◽  
Arthroplasty Surgery

Abstract Aim In vitro knee simulation has demonstrated favourable wear properties and decreased metal ion release of ceramic coated metal femoral components in total knee arthroplasty surgery. Femoral implants coated with ceramic have been used in patients, however the subsequent clinical performance and time-to-revision of these implants is largely unknown. The scope of this study was to review the current available clinical literature, focusing on retrieval studies of Ceramic-Coated TKAs. Method Literature review of PubMed and MEDLINE. All studies included demonstrated clinical evaluation of implant performance, either in vivo or at revision. Results 9 studies were identified and included for analysis in this study. Retrieval analysis has illustrated microscopic defects in coatings of revised implants, with associated abrasion and 3rd body wear of the polyethylene component. Evidence suggests that coating femoral components with ceramic can prevent effective cement bonding, leading to aseptic loosening and thus earlier implant failure. Despite these problems, high volume centres have been able to demonstrate comparable results when compared with traditional bearing surface combinations. The mechanism behind metal ion hypersensitivity is currently poorly understood; however, the use of ceramic coated knee replacements is demonstrating a reduction in metal ion release. Conclusions Whilst conferring favourable clinical properties in certain instances, the lack of surgical, implant and patient data surrounding the use of this coated implants remains concerning. The literature base remains limited, and meaningful clinical conclusions cannot be drawn. Recommendations include performing robust clinical trials in order to delineate the clinical efficacy of ceramic coatings in knee arthroplasty.

Metal Ion Release and Cytotoxicity of Titanium Orthodontic Miniscrews

2017 ◽  
Vol 730 ◽  
pp. 141-147
Author(s):  
Katha Kosayadiloka ◽  
Nathaphon Tangjit ◽  
Suwannee Luppanapornlarp ◽  
Peerapong Santiwong
Keyword(s):  
Inductively Coupled Plasma ◽  
Metal Ion ◽  
The Self ◽  
Cytotoxicity Test ◽  
Ion Release ◽  
Element Analysis ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Metal Ion Release ◽  
Plasma Mass Spectrometry

The aim of this study was to investigate the metal ion release and cytotoxicity of MU orthodontic miniscrews as well as two other brands of orthodontic miniscrews over time. Twenty-four orthodontic miniscrews were tested, divided into three groups of eight. Each sample extraction was performed following the ISO 10993-12:2012 method. Solutions were collected after 1, 7, and 30 days (T1, T2, and T3). The supernatants extracted from these three groups were added and exposed to mouse L929 fibroblastic cell line using an MTT cytotoxicity test. They were also tested for ion release by inductively coupled plasma-mass spectrometry (ICP-MS). Element analysis by energy-dispersive X-ray spectroscopy (EDS) was used to analyze the surfaces of the miniscrews. The quantification of three elements, namely, titanium (Ti), aluminum (Al), and vanadium (V) were assessed. The results indicated that there were no statistical differences between the self-made orthodontic miniscrews and those from two commercial groups (p<0.05). Throughout the testing period, the quantity of ions increased from T1 to T3. After 24 h, vanadium was the first to appear on the surface in small quantities in other two commercial groups. The self-made orthodontic miniscrews exhibited no toxic effects on living cells.

scholarly journals Copper and Cobalt Ions Released from Metal Oxide Nanoparticles Trigger Skin Sensitization

2021 ◽  
Vol 12 ◽  
Author(s):  
Sung-Hyun Kim ◽  
Jin Hee Lee ◽  
Kikyung Jung ◽  
Jun-Young Yang ◽  
Hyo-Sook Shin ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Metal Ion ◽  
Metal Oxide Nanoparticles ◽  
Skin Sensitization ◽  
Ion Release ◽  
Metal Chlorides ◽  
Cobalt Ions ◽  
Metal Ion Release

Human skins are exposed to nanomaterials in everyday life from various sources such as nanomaterial-containing cosmetics, air pollutions, and industrial nanomaterials. Nanomaterials comprising metal haptens raises concerns about the skin sensitization to nanomaterials. In this study, we evaluated the skin sensitization of nanomaterials comparing metal haptens in vivo and in vitro. We selected five metal oxide NPs, containing copper oxide, cobalt monoxide, cobalt oxide, nickel oxide, or titanium oxide, and two types of metal chlorides (CoCl2 and CuCl2), to compare the skin sensitization abilities between NPs and the constituent metals. The materials were applied to KeratinoSensTM cells for imitated skin-environment setting, and luciferase induction and cytotoxicity were evaluated at 48 h post-incubation. In addition, the response of metal oxide NPs was confirmed in lymph node of BALB/C mice via an in vivo method. The results showed that CuO and CoO NPs induce a similar pattern of positive luciferase induction and cytotoxicity compared to the respective metal chlorides; Co3O4, NiO, and TiO2 induced no such response. Collectively, the results implied fast-dissolving metal oxide (CuO and CoO) NPs release their metal ion, inducing skin sensitization. However, further investigations are required to elucidate the mechanism underlying NP-induced skin sensitization. Based on ion chelation data, metal ion release was confirmed as the major “factor” for skin sensitization.

In vitro effects of macrophages on orthopaedic implant alloys and local release of metallic alloy components

2020 ◽  
Vol 102-B (7_Supple_B) ◽  
pp. 116-121
Author(s):  
G. Heise ◽  
C. M. Black ◽  
R. Smith ◽  
B. R. Morrow ◽  
W. M. Mihalko
Keyword(s):  
Stainless Steel ◽  
Titanium Alloy ◽  
Metal Ion ◽  
Oxide Surface ◽  
Stainless Steel Surface ◽  
Orthopaedic Implant ◽  
Cobalt Chromium ◽  
Ion Release ◽  
Metal Ion Release

Aims This study aimed to determine if macrophages can attach and directly affect the oxide layers of 316L stainless steel, titanium alloy (Ti6Al4V), and cobalt-chromium-molybdenum alloy (CoCrMo) by releasing components of these alloys. Methods Murine peritoneal macrophages were cultured and placed on stainless steel, CoCrMo, and Ti6Al4V discs into a 96-well plate. Cells were activated with interferon gamma and lipopolysaccharide. Macrophages on stainless steel discs produced significantly more nitric oxide (NO) compared to their control counterparts after eight to ten days and remained elevated for the duration of the experiment. Results On stainless steel, both nonactivated and activated cell groups were shown to have a significant increase in metal ion release for Cr, Fe, and Ni (p < 0.001, p = 0.002, and p = 0.020 respectively) compared with medium only and showed macrophage-sized corrosive pits on the stainless steel surface. On titanium alloy discs there was a significant increase in aluminum (p < 0.001) among all groups compared with medium only. Conclusion These results indicated that macrophages were able to attach to and affect the oxide surface of stainless steel and titanium alloy discs. Cite this article: Bone Joint J 2020;102-B(7 Supple B):116–121.

In vitro andin vivo metal ion release

1988 ◽  
Vol 22 (4) ◽  
pp. 321-338 ◽  
Author(s):  
Stanley A. Brown ◽  
Lilian J. Farnsworth ◽  
Katharine Merritt ◽  
Timothy D. Crowe
Keyword(s):  
Metal Ion ◽  
Ion Release ◽  
Metal Ion Release

scholarly journals In Vitro Physical-Chemical Behaviour Assessment of 3D-Printed CoCrMo Alloy for Orthopaedic Implants

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 857
Author(s):  
Radu Mirea ◽  
Iuliana Manuela Biris ◽  
Laurentiu Constantin Ceatra ◽  
Razvan Ene ◽  
Alexandru Paraschiv ◽  
...  
Keyword(s):  
Metal Ion ◽  
Protective Layer ◽  
Ion Release ◽  
Cocrmo Alloy ◽  
Physical Chemical ◽  
Metal Ion Release ◽  
Short Period ◽  
3D Printed ◽  
Metallic Sample

In this study, a CoCrMo-based metallic alloy was manufactured using a 3D-printing method with metallic powder and a laser-based 3D printer. The obtained material was immersed in a simulated body fluid (SBF) similar to blood plasma and kept 2 months at 37 °C and in relative motion against the SBF in order to mimic the real motion of body fluids against an implant. At determined time intervals (24, 72, 168, 336, and 1344 h), both the metallic sample and SBF were characterized from a physical-chemical point of view in order to assess the alloy’s behaviour in the SBF. Firstly, the CoCrMo based metallic sample was characterized by scanning electron microscopy (SEM) for assessing surface corrosion and X-ray diffraction (XRD) for determining if and/or what kind of spontaneous protective layer was formed on the surface; secondly, the SBF was characterized by pH, electrical conductivity (EC), and inductively coupled plasma mass spectroscopy (ICP-MS) for assessing the metal ion release. We determined that a 3D-printed CoCrMo alloy does not represent a potential biological hazard in terms of the concentration of metal ion releases, since it forms, in a relatively short period of time, a protective CoCr layer on its exposed surface.

scholarly journals Reduction of Tribocorrosion Products When Using the Platform-Switching Concept

2018 ◽  
Vol 97 (9) ◽  
pp. 995-1002 ◽  
Author(s):  
G.O. Alrabeah ◽  
J.C. Knowles ◽  
H. Petridis
Keyword(s):  
Bone Loss ◽  
Metal Ion ◽  
Pure Titanium ◽  
Titanium Implants ◽  
Ion Release ◽  
Sem Images ◽  
Metal Ion Release ◽  
Platform Switching ◽  
Tissue Reactions ◽  
Cobalt Chrome

The reduced marginal bone loss observed when using the platform-switching concept may be the result of reduced amounts of tribocorrosion products released to the peri-implant tissues. Therefore, the purpose of this study was to compare the tribocorrosion product release from various platform-matched and platform-switched implant-abutment couplings under cyclic loading. Forty-eight titanium implants were coupled with pure titanium, gold alloy, cobalt-chrome alloy, and zirconia abutments forming either platform-switched or platform-matched groups ( n = 6). The specimens were subjected to cyclic occlusal forces in a wet acidic environment for 24 h followed by static aqueous immersion for 6 d. The amount of metal ions released was measured using inductively coupled plasma mass spectrometry. Microscopic evaluations were performed pre- and postimmersion under scanning electron microscope (SEM) equipped with energy-dispersive spectroscopy X-ray for corrosion assessment at the interface and wear particle characterization. All platform-switched groups showed less metal ion release compared with their platform-matched counterparts within each abutment material group ( P < 0.001). Implants connected to platform-matched cobalt-chrome abutments demonstrated the highest total mean metal ion release (218 ppb), while the least total mean ion release (11 ppb) was observed in the implants connected to platform-switched titanium abutments ( P ≤ 0.001). Titanium was released from all test groups, with its highest mean release (108 ppb) observed in the implants connected to platform-matched gold abutments ( P < 0.001). SEM images showed surface tribocorrosion features such as pitting and bands of fretting scars. Wear particles were mostly titanium, ranging from submicron to 48 µm in length. The platform-matched groups demonstrated a higher amount of metal ion release and more surface damage. These findings highlight the positive effect of the platform-switching concept in the reduction of tribocorrosion products released from dental implants, which consequently may minimize the adverse tissue reactions that lead to peri-implant bone loss.

scholarly journals In-Vivo Corrosion Characterization and Assessment of Absorbable Metal Implants

Coatings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 282 ◽  
Author(s):  
Mokhamad Fakhrul Ulum ◽  
Wahyu Caesarendra ◽  
Reza Alavi ◽  
Hendra Hermawan
Keyword(s):  
Metal Ion ◽  
Product Formation ◽  
Corrosion Monitoring ◽  
Ion Release ◽  
New Techniques ◽  
Metal Implants ◽  
Metal Ion Release ◽  
Metallurgical Characterization

Absorbable metals have been introduced as materials to fabricate temporary medical implants. Iron, magnesium and zinc have been considered as major base elements of such metals. The metallurgical characterization and in-vitro corrosion assessment of these metals have been covered by the new ASTM standards F3160 and F3268. However, the in-vivo corrosion characterization and assessment of absorbable metal implants are not yet well established. The corrosion of metals in the in-vivo environment leads to metal ion release and corrosion product formation that may cause excessive toxicity. The aim of this work is to introduce the techniques to assess absorbable metal implants and their in-vivo corrosion behavior. This contains the existing approaches, e.g., implant retrieval and histological analysis, ultrasonography and radiography, and the new techniques for real-time in-vivo corrosion monitoring.

Sign in / Sign up

Export Citation Format

Share Document