scholarly journals Quality of screen printing in knit fabric for different mesh count on semi solid design

2020 ◽  
Vol 6 (6) ◽  
Author(s):  
Rasheda Begum Dina ◽  
Md Zulhash Uddin ◽  
UmmulKhair Fatema
Keyword(s):  
Screen Printing ◽  
Visual Assessment ◽  
Color Difference ◽  
Mesh Screen ◽  
Microscope Images ◽  
Different Types ◽  
Digital Microscope ◽  
Semi Solid ◽  
Screen Mesh

In semi solid design, the parameters of the quality of the printed fabric were color fastness, level of print detail, color difference, print coverage, saw-tooth effect, line sharpness etc. Actually, printed fabric quality was evaluated by these parameters. Again, print coverage, saw-tooth effect, line sharpness, etc. were examined by estimating different distances, angles etc. in printed fabric and these factors were compared with image positives. Mesh opening effect on the quality of screen printed fabric was investigated after printing the semi solid design on knit fabric using different mesh count screens and different types of the link. To print semi solid design on knit fabric different types of ink as well as non-identical mesh count was used. Then mesh screen out come on the design and form of printed fabric in screen printing was examined. For the evaluation of semi solid design effect there remains two different methods.The first one is visual assessment and another way is microscope observation. Here, to determine the probability of the amount of ink flowing by the screen, mesh opening area of every screen was considered and it was done from respective digital microscope images.

scholarly journals Effect of mesh count on dot design and quality of screen printing in knit fabric

2020 ◽  
Vol 6 (4) ◽  
Author(s):  
Rasheda Begum Dina ◽  
Md Zulhash Uddin ◽  
Ummul Khair Fatema
Keyword(s):  
Microscopic Observation ◽  
Screen Printing ◽  
Visual Assessment ◽  
Color Difference ◽  
Color Fastness ◽  
Design Effect ◽  
Microscope Images ◽  
Different Types ◽  
Digital Microscope

Mesh count effect on the design and quality of printed fabric in screen printing was investigated after printing dot design on knit fabric using different mesh count screens and different types of ink. The design effect was evaluated by visual assessment as well as microscopic observation. Mesh opening area of each screen type was calculated from respective digital microscope images to find the possibility of the amount of ink passing through the screen and level of print detail, produced in dot design on the screen. Also, print coverage, saw-tooth effect, line sharpness, etc. were examined by measuring different distances, the diameter of dots, etc. in printed fabric and were compared with image positives. The quality of the printed fabric was assessed by color difference, color fastness.

scholarly journals Mesh opening effect on solid design and quality of screen printing in knit fabric

2020 ◽  
Vol 6 (5) ◽  
Author(s):  
Rasheda Begum Dina ◽  
Md Zulhash Uddin ◽  
UmmulKhair Fatema
Keyword(s):  
Microscopic Observation ◽  
Screen Printing ◽  
Visual Assessment ◽  
Design Effect ◽  
Microscope Images ◽  
Different Types ◽  
Digital Microscope

Mesh opening effect on the design and quality of printed fabric in screen printing was investigated after printing solid design on knit fabric using different mesh count screens and different types of ink. The design effect was evaluated by visual assessment as well as microscopic observation. Mesh opening area of each screen type was calculated from respective digital microscope images to find the possibility of the amount of ink passing through the screen and level of print detail, produced in solid design on the screen. Also, print coverage, saw-tooth effect, line sharpness, etc. were examined by measuring different distances, angles etc. in printed fabric and were compared with image positives.

scholarly journals The study of the screen printing quality depending on the surface to be printed

2018 ◽  
Vol 178 ◽  
pp. 03015
Author(s):  
Viorica Cazac ◽  
Jana Cîrja ◽  
Emilia Balan ◽  
Cristina Mohora
Keyword(s):  
Screen Printing ◽  
Printing Process ◽  
Printing Quality ◽  
Mesh Screen ◽  
Study Results ◽  
Different Types ◽  
Composition Structure ◽  
Screen Printed

This paper presents the study results regarding the analysis of the screen printing quality on different types of materials. The quality of the screen printing is determined by several particularities of the screen printing process such as: the type of mesh, screen ruling, ink viscosity, raster spacing, etc. The material which is supposed to be printed is as important as the particularities of the screen printing process itself. The composition, structure and features of the printed items as well as the composition, viscosity and other ink properties, all together determine the quality of the screen printed matter.

Effect of Welding Speed and Tool Pin Profile on Weld Quality of Friction Stir Welded Semi-Solid Aluminium Alloy 356

2013 ◽  
Vol 372 ◽  
pp. 471-477
Author(s):  
Prapas Muangjunburee ◽  
Sirikul Wisutmethangoon
Keyword(s):  
Welding Speed ◽  
Solid Metal ◽  
Rotating Speed ◽  
Friction Stir ◽  
Uniform Dispersion ◽  
Different Types ◽  
Fine Microstructure ◽  
Semi Solid ◽  
Tool Pin

The effect of welding speeds and tool pin profiles on microstructure and mechanical properties of semi-solid metal 356 joints produced by friction stir welding was investigated. In this work, the joints were made by using a fixed rotating speed of 1750 rpm with varying welding speed of 80, 120 and 160 mm/min. In addition, two different types of tool pins, cylindrical and square pin, were applied. The Scanning Electron Microscope (SEM) reveals fine microstructure and uniform dispersion of Si (Silicon) particles obtained from cylindrical pin than that of square pin. Transverse and longitudinal tensile strengths obtained from cylindrical pin are greater than square pin. Furthermore, the joint made from 1750 rpm, 160 mm/min with cylindrical pin shows highest strength.

scholarly journals Determination of Nitrogen and Sulphur Mineralization in Batch and Semi-Continuous Anaerobic Digestion Using an Artificial Fiber Bag Technique

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4205
Author(s):  
Jacob Rosholm Mortensen ◽  
Alastair James Ward ◽  
Martin Riis Weisbjerg ◽  
Sasha Daniel Hafner ◽  
Henrik Bjarne Møller
Keyword(s):  
Anaerobic Digestion ◽  
Methane Production ◽  
Nutrient Content ◽  
Sulphur Mineralization ◽  
Different Types ◽  
Before And After ◽  
Thermophilic Conditions ◽  
Semi Solid

In the biogas industry, feedstock plans are used to estimate methane production and nutrient content in the digestate, however, these predictions do not consider the mineralized nitrogen fraction of the feedstock, which is useful when determining the quality of the digestate. In this study, the artificial fiber bag technique, which is commonly used to study feedstock degradation in ruminants, was implemented in anaerobic digestion to quantify mineralization of N and S. The artificial fiber bags were used to enclose substrates but with access to inoculum because of small pores in the bags, thereby enabling digestion. The content of the bags was analyzed before and after digestion to quantify residual mass as well as N and S concentration in the substrate. The method was validated through batch anaerobic digestion of a single substrate with and without bags, where the bags showed little influence on methane production and degradation. Semi-continuous anaerobic digestion experiments showed higher substrate degradation and higher N and S release at thermophilic conditions using four different types of feedstocks and proved useful for solid feedstocks but less so for semi-solid feedstock. For N, most of the mineralization occurred during the first 15 days over a trial of 30 days.

Analyses on the Influencing Factors of Screen-Printing Technology of Liquid Wallpaper Paint

2010 ◽  
Vol 174 ◽  
pp. 263-266
Author(s):  
Chuan Xiang Zhang ◽  
Xiao Dong Li ◽  
Dong Bai Zhao
Keyword(s):  
Screen Printing ◽  
Blade Angle ◽  
High Quality ◽  
Existing Problems ◽  
Printing Quality ◽  
Original Production ◽  
Screen Printing Technology ◽  
Wall Decoration ◽  
Screen Mesh

The application status and existing problems of liquid wallpaper paint screen printing in wall decoration were analyzed, and through the analysis original production, screen plate-making, the effects of printing process on the quality of liquid wallpaper paint printing on the wall were discussed. Experiments find that when screen mesh was in the range of 150 to 300 mesh per inch, scumming can be effectively avoided, the thickness of the film can be guaranteed, and can making printing stereoscopic; Limiting the exposure time from 45 to 65 seconds can get high quality screen plate. To take manual scraping with the blade angle of about 45 degrees, can guarantee the best printing quality and film thickness etc.

Enumeration of Cryptosporidium oocysts from surface water concentrates by laser-scanning cytometry

2000 ◽  
Vol 41 (7) ◽  
pp. 197-202 ◽  
Author(s):  
F. Zanelli ◽  
B. Compagnon ◽  
J. C. Joret ◽  
M. R. de Roubin
Keyword(s):  
Surface Water ◽  
Water Samples ◽  
Laser Scanning ◽  
Immunomagnetic Separation ◽  
Entire Surface ◽  
Cryptosporidium Oocysts ◽  
Different Types ◽  
Laser Scanning Cytometry ◽  
Direct Microscopic Observation

The utilization of the ChemScan® RDI was tested for different types of water concentrates. Concentrates were prepared by cartridge filtration or flocculation, and analysed either without purification, or after Immunomagnetic separation (IMS) or flotation on percoll-sucrose gradients. Theenumeration of the oocysts was subsequently performed using the ChemScan® RDI Cryptosporidium application. Enumeration by direct microscopic observation of the entire surface of the membrane was carried out as a control, and recoveries were calculated as a ratio between the ChemScan® RDI result and the result obtained with direct microscopic enumeration. The Chemscan enumeration technique proved reliable, with recoveries yielding close to 100% in most cases (average 125%, range from 86 to 467%) for all the concentration/purification techniques tested. The quality of the antibodies was shown to be critical, with antibodies from some suppliers yielding recoveries a low as 10% in some cases. This difficulty could, however, be overcome by the utilization of the antibody provided by Chemunex. These data conclusively prove that laser scanning cytometry, which greatly facilitates the microscopic enumeration of Cryptosporidium oocysts from water samples and decreases the time of observation by four to six times, can be successfully applied to water concentrates prepared from a variety of concentration/purification techniques.

Different Types of Auricular Keloids and Treatment by Intralesional Cryosurgery: Best Practice for Obtaining Long-Lasting Clinical Results

Dermatology ◽  
2021 ◽  
pp. 1-10
Author(s):  
Yaron Har-Shai ◽  
Lior Har-Shai ◽  
Viktor A. Zouboulis ◽  
Christos C. Zouboulis
Keyword(s):  
Quality Of Life ◽  
Body Image ◽  
Recurrence Rate ◽  
Best Practice ◽  
Clinical Results ◽  
Psychosocial Impact ◽  
Aesthetic Outcome ◽  
The Past ◽  
Different Types

<b><i>Background:</i></b> Auricular keloids belong to the most perplexing medical conditions, which have significant psychosocial impact on the patient’s body image and quality of life. <b><i>Summary:</i></b> The article is purposed to provide dermatologists and plastic surgeons with the best proven practice using intralesional cryosurgery for the treatment of the different auricular keloid types in order to obtain superior clinical results by minimizing the probability of recurrence. In the past 20 years, the authors have developed novel procedures in order to increase the effectiveness of intralesional cryosurgery on auricular keloids, including hydrodissection, warm gauze technique, and excision of dangling skin. Long-lasting clinical results with a low recurrence rate and a satisfactory aesthetic outcome are achieved with no deformation of the ear framework.

Sign in / Sign up

Export Citation Format

Share Document