Analyses on the Influencing Factors of Screen-Printing Technology of Liquid Wallpaper Paint

2010 ◽  
Vol 174 ◽  
pp. 263-266
Author(s):  
Chuan Xiang Zhang ◽  
Xiao Dong Li ◽  
Dong Bai Zhao
Keyword(s):  
Screen Printing ◽  
Blade Angle ◽  
High Quality ◽  
Existing Problems ◽  
Printing Quality ◽  
Original Production ◽  
Screen Printing Technology ◽  
Wall Decoration ◽  
Screen Mesh

The application status and existing problems of liquid wallpaper paint screen printing in wall decoration were analyzed, and through the analysis original production, screen plate-making, the effects of printing process on the quality of liquid wallpaper paint printing on the wall were discussed. Experiments find that when screen mesh was in the range of 150 to 300 mesh per inch, scumming can be effectively avoided, the thickness of the film can be guaranteed, and can making printing stereoscopic; Limiting the exposure time from 45 to 65 seconds can get high quality screen plate. To take manual scraping with the blade angle of about 45 degrees, can guarantee the best printing quality and film thickness etc.

scholarly journals Quality of screen printing in knit fabric for different mesh count on semi solid design

2020 ◽  
Vol 6 (6) ◽  
Author(s):  
Rasheda Begum Dina ◽  
Md Zulhash Uddin ◽  
UmmulKhair Fatema
Keyword(s):  
Screen Printing ◽  
Visual Assessment ◽  
Color Difference ◽  
Mesh Screen ◽  
Microscope Images ◽  
Different Types ◽  
Digital Microscope ◽  
Semi Solid ◽  
Screen Mesh

In semi solid design, the parameters of the quality of the printed fabric were color fastness, level of print detail, color difference, print coverage, saw-tooth effect, line sharpness etc. Actually, printed fabric quality was evaluated by these parameters. Again, print coverage, saw-tooth effect, line sharpness, etc. were examined by estimating different distances, angles etc. in printed fabric and these factors were compared with image positives. Mesh opening effect on the quality of screen printed fabric was investigated after printing the semi solid design on knit fabric using different mesh count screens and different types of the link. To print semi solid design on knit fabric different types of ink as well as non-identical mesh count was used. Then mesh screen out come on the design and form of printed fabric in screen printing was examined. For the evaluation of semi solid design effect there remains two different methods.The first one is visual assessment and another way is microscope observation. Here, to determine the probability of the amount of ink flowing by the screen, mesh opening area of every screen was considered and it was done from respective digital microscope images.

Development and production of large blast furnaces from 2015 to 2016 in China

2020 ◽  
Vol 117 (1) ◽  
pp. 108 ◽  
Author(s):  
Bing Dai ◽  
Hong-ming Long ◽  
Yong-cai Wen ◽  
Yi-long Ji ◽  
Yun-cai Liu
Keyword(s):  
Raw Materials ◽  
Blast Furnaces ◽  
Security Risk ◽  
Hot Metal ◽  
High Quality ◽  
Large Blast ◽  
Existing Problems ◽  
Cost Cutting ◽  
The Future

This article has reviewed the production status, total reductant consumption, raw materials and operation principle indexes of large blast furnaces in China from 2015 to 2016. The developing actuality of Chinese large BFs has been quantitatively analyzed and the existing problems have been proposed clearly. Based on that, maintaining production stable, enhancing the quality of raw materials and improving the operation principles are suggested. Large BFs take advantages of high-quality hot metal, energy saving, cost-cutting, high mechanization and automation levels and are sufficient to meet the challenges of economic crisis, environmental pressure and security risk form the future. Thus, the number of large BFs in China will continue to increase in the future.

Study of RFID Tag Antenna Manufacturing Based on Printing Technology

2013 ◽  
Vol 329 ◽  
pp. 135-138
Author(s):  
Cai Feng Liu ◽  
Di Feng Lu ◽  
Fui Gui Yan ◽  
Yang Mei
Keyword(s):  
Screen Printing ◽  
Influence Factors ◽  
Conductive Ink ◽  
Three Solutions ◽  
Printing Technology ◽  
Rfid Tag ◽  
Effective Work ◽  
Printing Quality ◽  
The Cost

To study printing technology used in the RFID field, just want to make the cost of tags much lower. Since printing technology has widely used in RFID field,there are many problems. Through analysis of influence factors of antenna printing technology, three solutions to solve the difficultys of RFID tag antenna manufacturing use of printing technology. In order to improve the printing quality of the printed ink film of the RFID tag antenna, many factors should be considered. Finally, agrees that the future of conductive ink screen printing manufacturing RFID tag antenna technology is splendid with our effective work.

scholarly journals The study of the screen printing quality depending on the surface to be printed

2018 ◽  
Vol 178 ◽  
pp. 03015
Author(s):  
Viorica Cazac ◽  
Jana Cîrja ◽  
Emilia Balan ◽  
Cristina Mohora
Keyword(s):  
Screen Printing ◽  
Printing Process ◽  
Printing Quality ◽  
Mesh Screen ◽  
Study Results ◽  
Different Types ◽  
Composition Structure ◽  
Screen Printed

This paper presents the study results regarding the analysis of the screen printing quality on different types of materials. The quality of the screen printing is determined by several particularities of the screen printing process such as: the type of mesh, screen ruling, ink viscosity, raster spacing, etc. The material which is supposed to be printed is as important as the particularities of the screen printing process itself. The composition, structure and features of the printed items as well as the composition, viscosity and other ink properties, all together determine the quality of the screen printed matter.

scholarly journals DEVELOPMENT OF METHODOLOGY FOR CADASTRAL ACTIVITY

2021 ◽  
Vol 26 (4) ◽  
pp. 94-99
Author(s):  
Sergey A. Atamanov ◽  
Keyword(s):  
Goal Achievement ◽  
High Quality ◽  
Existing Problems ◽  
Least Solution

The purpose of the research is the formalization of cadastral activity from systemic viewpoint. The article discusses the task of ensuring good quality of USRER data and provided services, which is solved by conducting high-quality cadastral works. The article deals defines the notion of quality, its factors and formulates cadastral results, which should contribute to "efficient" and least solution for goal achievement, which is legally provided, least resource-consuming and implemented in a given situation. As a result, the article offers a new methodology for cadastral activity, aimed at solving existing problems.

scholarly journals Study of the influence of paper parameters on quality rizographic printing

2020 ◽  
pp. 11-16
Author(s):  
V. S. Yudenkov ◽  
P. Y. Sulim
Keyword(s):  
Physical And Mechanical Properties ◽  
Digital Printing ◽  
Print Quality ◽  
Offset Printing ◽  
High Quality ◽  
Laser Printing ◽  
Printing Quality ◽  
Surface Microgeometry ◽  
The Creation

Creation of new digital technologies let automate the reproduction of text and graphic information, led to the creation and development of the digital printing. Digital printing is a technology for producing prints in the printer based on the original layout, created as corresponding codes with a computer. One of the technologies of digital printing is a computer-to-press and one of the devices in this direction is risograph. The risograph printing quality is worse than offset printing. The text is printing with medium sharpness and images remind photos in old newspapers and require special preparation. But risograph is the most profitable solution for small and medium circulations from 50 up to 1000 sheets. Wide usage of risograph printing in typographies demands increase performance of the equipment with the high print quality of digital images. To improve the quality of risographic printing, the creation of methods is required to form the initial indicators of the original layout (clarity, correct transmission of halftones, contrast). At the same time, the result of obtaining high-quality images obtained by printing on a risograph is affected by surface microgeometry and the physical and mechanical properties of paper. So, the optical density of the ink layer on the print is largely determined by the structure of the sections of paper, in particular, absorbency and porosity. To obtain high-quality images on prints, it is necessary not only to customize the original layout, but also to select paper with such characteristics that would allow you to get the best result when printing on a risograph. Since the risograph occupies an intermediate place in quality between copying equipment and laser printing, a laser print is taken as the standard for print quality. And one of the tasks of the quality of risographic prints is to increase it to the quality of laser printing.

scholarly journals Depth Profiling of Diffraction-based Security Features in Authentic and Counterfeit Banknotes

2017 ◽  
Vol 54 (2) ◽  
pp. 321-325 ◽  
Author(s):  
Ioan Cristinel Negru ◽  
Viorica Vasilache ◽  
Ion Sandu ◽  
Romeo Iulian Olariu ◽  
Petru Ovidiu Tanasa ◽  
...  
Keyword(s):  
Depth Profiling ◽  
High Quality ◽  
Printing Quality ◽  
Intaglio Printing

High printing quality of banknotes and the variety of security features implemented in banknotes make a big difference between the genuine notes and high-quality forgeries. The counterfeiter cannot reproduce or imitate the printing quality and all security features embedded in every banknote, such as Optically Variable Ink, Optically Variable Diffractive Images, or intaglio printing. The present research focused on the examination of optically variable devices embedded on 50Îbanknotes. The altered banknotes were examined using different techniques.

scholarly journals Using Process Evaluation To Promote Students'Inventive Ability Development - Taking Tourism Aesthetics As An Example

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Lin Zeng
Keyword(s):  
Rapid Development ◽  
Colleges And Universities ◽  
Tourism Industry ◽  
Hotel Management ◽  
High Quality ◽  
Existing Problems ◽  
Tourism Management ◽  
Teachers And Students ◽  
Process Studies

with the rapid development of tourism industry, it requires more and more high quality of tourism practitioners, therefore, colleges and universities are particularly important to the cultivation of high-quality tourism practitioners. Tourism Aesthetics is one of the important courses of tourism management and hotel management in colleges and universities. Aiming at the present situation and existing problems of tourism aesthetics course, this paper evaluates the cultivation of students'innovation ability by process, studies and discusses the reform of tourism aesthetics course teaching from 3 aspects: school, teachers and students.

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Experience of clinical testing of personal telemedicine system ‘Obereg’ for remote monitoring of patients in intensive care units

2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets
Keyword(s):  
Intensive Care ◽  
Intensive Care Units ◽  
Remote Monitoring ◽  
Clinical Testing ◽  
Transportation Of Patients ◽  
High Quality ◽  
Telemedicine System ◽  
Accuracy Of Measurements ◽  
Hospital Equipment

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.

Sign in / Sign up

Export Citation Format

Share Document