Modification and characterization of polysulfone films by ionizing radiation (gamma-rays) with enhanced hydrophilicity

MRS Advances ◽  
2018 ◽  
Vol 3 (63) ◽  
pp. 3833-3837
Author(s):  
Israel Fredy Sánchez-Salinas ◽  
Javier Illescas ◽  
Claudia Rosario Muro-Urista ◽  
Guillermina Burillo ◽  
María del Carmen Díaz Nava
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Reaction Time ◽  
Gamma Rays ◽  
Poly Vinyl Alcohol ◽  
Scanning Electron

AbstractPolysulfone (Pfu) films were modified by grafting poly(vinyl alcohol) (PVA) by the oxidative pre-irradiation technique. To achieve this modification, some parameters were modified such as the radiation dose, the concentration of PVA, the temperature and the reaction time. It was found that the grafted films with 12% presented a greater grafting percentage (0.86%). The modified films were characterized by means of the contact angle, Fourier transform infrared spectroscopy (FTIR-ATR) and scanning electron microscopy (SEM) techniques.

Preparation and Characterization of Lizardite

2014 ◽  
Vol 556-562 ◽  
pp. 109-112
Author(s):  
Shu Min Zheng ◽  
Kai Ming Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Hydrothermal Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Lizardite were synthesized by hydrothermal reaction in an Fe3+doped solution/environment using nanometer SiO2and MgO as precursors. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR). The results show that: the synthetic samples are lizardite with a thickness ranging from 60 nm to 200 nm in the temperature range 200°C~230°C.

Crystallization of Aragonite from Vaterite Precursor during Various Refluxing Times

2015 ◽  
Vol 1119 ◽  
pp. 466-470 ◽  
Author(s):  
Radek Ševčík ◽  
Petra Mácová ◽  
Marta Pérez-Estébanez
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Powder Diffraction ◽  
X Ray ◽  
Gradual Transformation ◽  
Scanning Electron

CaCO3 polymorphs are intensively studied due to their importance in the nature and the widespread use in the industry as well. This work is dealing with the crystallization of aragonite from vaterite dispersion during the refluxation at 100°C. The characterization of CaCO3 polymorphs during vaterite transformation was performed with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray powder diffraction (XRPD). The influence of the different refluxing times on the aragonite crystallization was discussed. The purest aragonite, 70.7(2) wt.%, was synthetized in the sample refluxed for 60 minutes. Prolonged refluxation strongly affected aragonite crystals with gradual transformation into calcite.

Thermal Characterization of Low Grade Wood Polyacylonitrile Composite

2011 ◽  
Vol 214 ◽  
pp. 392-396 ◽  
Author(s):  
Manoj Kumar ◽  
P.L. Sah ◽  
M.G.H. Zaidi ◽  
Anupam Srivastav
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Untreated Wood ◽  
Thermal Characterization ◽  
Low Grade ◽  
Eucalyptus Wood ◽  
Scanning Electron

A series of wood polyacrylonitrile (PAN) composites (WPCs) were synthesized through impregnation polymerization of Eucalyptus wood (Eucalyptus Grandies) by acrylonitrile (AN) in methanol (20-60% v/v) in the presence of benzoyl peroxide (1.0% w/v) in benzene medium at 70 ±10C. This resulted in corresponding WPCs with polyacrylonitrile (PAN) loading in the range of 15.5-20%. Loading of PAN into wood, as ascertained through TGA, DTGA and DTA and supported by Fourier Transform Infrared Spectroscopy (FTIR) as well as Scanning Electron Microscopy (SEM) was found to increase the resistance against thermo-oxidation of WPCs in comparison to untreated wood.

Growth and Characterization of Vapor Deposited Polyimide Thin Films

2013 ◽  
Vol 774-776 ◽  
pp. 824-827
Author(s):  
Fu Tong Chu ◽  
Chuan Li, ◽  
Li Jun He ◽  
Xing Zhao Liu
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Thermal Treatment ◽  
Vapor Deposition ◽  
Polymerization Temperature ◽  
Scanning Electron

In this paper, we report on the preparation and characterization of polyimide (PI) thin films through vapor deposition polymerization (VDP). PI thin films were formed by vapour co-deposition of the precursor monomers pyromellitic dianhydride (PMDA) and 4,4-oxydianiline (ODA) following a thermal treatment at a temperature of over 300°C. The effects of the polymerization temperature on the characterization of PI films were investigated using scanning electron microscopy and Fourier transform infrared spectroscopy. The results showed that the deposited polyamic acid (PAA, a precursor of polyimide) with imidization in the temperature interval of 300-400°C are smooth, uniformly thick and form without shrinkage.

Preparation of Borosilicate Xerogel and Research on its Mineralization

2012 ◽  
Vol 476-478 ◽  
pp. 2059-2062
Author(s):  
Chen Wang ◽  
Ya Dong Li ◽  
Gu Qiao Ding
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Ph Value ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compositional Changes ◽  
Scanning Electron

Tributyl borate was first adopted for the introduction of boron in the preparation of bioactive borosilicate xerogel by sol-gel method. The xerogel reacted continuously in 0.25M K2HPO4 solution with a starting pH value of 7.0 at 37 °C for 1day. The structural, morphologies and compositional changes resulting from the conversion were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that speed of formation of HA was cut way back on the time with the addition of boron and the induction period for the HA nucleation on the surface of the borosilicate xerogel was short than 1 days. The conversion mechanism of the borosilicate xerogels to hydroxyapaptite was also discussed.

Sign in / Sign up

Export Citation Format

Share Document