In-Situ Rapid Thermal Annealing of Heterostructures Grown by Molecular Beam Epitaxy

1987 ◽  
Vol 102 ◽  
Author(s):  
M. Cerullo ◽  
Julia M. Phillips ◽  
M. Anzlowar ◽  
L. Pfeiffer ◽  
J. L. Batstone ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Molecular Beam ◽  
High Vacuum ◽  
Processing Technique ◽  
Ultra High Vacuum ◽  
On Line ◽  
High Vacuum Environment

ABSTRACTA new in-situ rapid thermal annealing (RTA) apparatus which can be used to anneal entire wafers in an ultra high vacuum environment has been designed to be used in conjunction with the epitaxial growth of heterostructures. Drastic improvement in the crystallinity of CaF2/Si(100) can be achieved with RTA, and our results suggest that RTA can be used as an on-line processing technique for novel epitaxial structures.

In-Situ Rapid Thermal Annealing of Heterostructures Grown by Molecular Beam Epitaxy

1987 ◽  
Vol 107 ◽  
Author(s):  
M. Cerullo ◽  
Julia M. Phillips ◽  
M. Anzlowar ◽  
L. Pfeiffer ◽  
J. L. Batstone ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Molecular Beam ◽  
High Vacuum ◽  
Processing Technique ◽  
Ultra High Vacuum ◽  
On Line ◽  
High Vacuum Environment

AbstractA new in-situ rapid thermal annealing (RTA) apparatus which can be used to anneal entire wafers in an ultra high vacuum environment has been designed to be used in conjunction with the epitaxial growth of heterostructures. Drastic improvement in the crystallinity of CaF2/Si(100) can be achieved with RTA, and our results suggest that RTA can be used as an on-line processing technique for novel epitaxial structures.

An in situ and ex situ TEM study of the formation of thin cobalt silicide films by molecular beam epitaxy on the silicon (100) surface

1988 ◽  
Vol 46 ◽  
pp. 884-885
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Defect Density ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Metal Base ◽  
In Situ Experiments ◽  
Potential Applications

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.

Ultra-high-vacuum epitaxial growth of MgB2(0001) thin films on Mg(0001) via molecular beam epitaxy

2004 ◽  
Vol 16 (33) ◽  
pp. S3451-S3458 ◽  
Author(s):  
R Macovez ◽  
C Cepek ◽  
M Sancrotti ◽  
A Goldoni ◽  
L Petaccia ◽  
...  
Keyword(s):  
Thin Films ◽  
Molecular Beam Epitaxy ◽  
Epitaxial Growth ◽  
Molecular Beam ◽  
High Vacuum ◽  
Ultra High Vacuum

Rapid Thermal Annealing and Ion Implantation of Heteroepitaxial ZnSe/GaAs

1988 ◽  
Vol 144 ◽  
Author(s):  
B.J. Skromme ◽  
N.G. Stoffel ◽  
A.S. Gozdz ◽  
M.C. Tamargo ◽  
S.M. Shibli
Keyword(s):  
Electrical Properties ◽  
Molecular Beam Epitaxy ◽  
Ion Implantation ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Molecular Beam ◽  
Vacancy Formation ◽  
Annealing Temperatures ◽  
The Creation ◽  
Zn Vacancy

ABSTRACTWe describe the effects of rapid thermal annealing on the photoluminescence (PL) and electrical properties of heteroepitaxial ZnSe grown by molecular beam epitaxy on GaAs, using either no cap or plasma-deposited SiO2, Si3N4, or diamond-like C caps, and annealing temperatures from 500 to 800°C. Capless anneals (in contact with GaAs) produce badly degraded PL properties, while capped anneals can prevent this degradation. We show that Si3N4 is significantly more effective in preventing Zn out-diffusion through t e cap than previously employed SiO2 films, as evidenced by less pronounced PL features related to the creation of Zn vacancies during the anneal. Implant damage tends to enhance the Zn vacancy formation. Rapid thermal annealing with Si3N4 caps is shown to optically activate shallow N acceptor implants.

Amorphous Silicon Films and Superlattices Grown by Molecular Beam Epitaxy: An Optical Analysis

2002 ◽  
Vol 715 ◽  
Author(s):  
D. J. Lockwood ◽  
J.-M. Baribeau ◽  
M. Noël ◽  
J. C. Zwinkels ◽  
B. J. Fogal ◽  
...  
Keyword(s):  
Molecular Beam Epitaxy ◽  
Amorphous Silicon ◽  
Molecular Beam ◽  
Crystalline Silicon ◽  
Quartz Substrate ◽  
High Vacuum ◽  
Impurity Content ◽  
Thin Layers ◽  
Silicon Films ◽  
Ultra High Vacuum

AbstractWe produce a novel form of amorphous silicon through ultra-high-vacuum molecular beam epitaxy. By depositing silicon atoms onto a fused quartz substrate at temperatures between 98 and 335°C, we obtain a silicon-based material that lacks the characteristic periodicity of crystalline silicon but nevertheless has 98% of its density. The impurity content of this material is studied through infrared and secondary ion mass spectroscopies. The primary impurity found is oxygen, with hydrogen and carbon atoms also being found at trace levels. The Raman spectra of the amorphous silicon films are measured and the results, as they relate to the presence of disorder, are interpreted. We also use this molecular beam epitaxy method to fabricate a number of amorphous silicon superlattices, comprised of thin layers of amorphous silicon separated with even thinner layers of SiO2. The optical properties of the films and superlattices are contrasted.

Epitaxial Growth of Near Noble Silicides on (111)Si by Rapid Thermal Annealing

1986 ◽  
Vol 74 ◽  
Author(s):  
H. C. Cheng ◽  
I. C. Wu ◽  
L. J. Chen
Keyword(s):  
Epitaxial Growth ◽  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Solid Phase ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Furnace Annealing ◽  
Transmission Electron ◽  
Vacuum Method ◽  
Comparable Quality

AbstractThe epitaxial growth of near noble silicides, including CoSi2, NiSi2, FeSi2, Pd2 Si, and PtSi on (111)Si, by rapid thermal annealing was studied by transmission electron microscopy. Single-crystalline CoSi2 was formed on (111)Si in the solid phase epitaxy regime by a non-ultra-high vacuum method. The effect on gas ambient was found to be of critical importance on the growth of single-crystal CoSi2 on (111)Si. The best NiSi2, FeSi2, Pd2 Si, and PtSi epitaxy grown on (111)Si by rapid thermal annealing were found to be of comparable quality to those grown by conventional furnace annealing.

Sign in / Sign up

Export Citation Format

Share Document