Effects Of Cation Segregation At Oxide Grain Boundaries On Grain Boundary Diffusion And Oxidation Kinetics Of Nickel

1991 ◽  
Vol 238 ◽  
Author(s):  
C. M. Cotelia ◽  
M. J. Bennett ◽  
A. J. Garratt-Reed
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Boundary Segregation ◽  
Oxidation Mechanism ◽  
Grain Boundary Segregation ◽  
Reactive Element ◽  
Protective Oxide ◽  
General Applicability ◽  
The Relationship ◽  
Kinetics Of

ABSTRACTThe oxidation behavior of Ni, implanted with either divalent Ce2+ or trivalent Y3+, has been studied to test the general applicability of the grain boundary segregation explanation for the reduction in rate of oxidation resulting from reactive element additions to metals that form protective oxide scales. Oxidation of Ce- and Y-implanted Ni at 900°C resulted in grain boundary segregation of the implanted species in the NiO scales formed. The rate of oxidation of Ni was reduced and there was evidence for a change in oxidation mechanism. Additionally, the grain size of the oxides was much smaller. All the observations were entirely consistent with a reduction in cation transport resulting from segregation of foreign ions at the oxide grain boundaries. These results on Ni are compared with recent studies of Ce- and Y-implanted Cr to draw general conclusions about the relationship between grain boundary segregation in oxides and the reactive element effect on oxidation.

Effect of Isothermal Holding Temperature on NGS Kinetics of Phosphorus and Temper Embrittlement

2007 ◽  
Vol 348-349 ◽  
pp. 549-552
Author(s):  
Jun Wang ◽  
Qing Fen Li ◽  
Er Bao Liu
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Isothermal Holding ◽  
Boundary Segregation ◽  
Temper Embrittlement ◽  
Solution Treatment ◽  
Grain Boundary Segregation ◽  
Solution Temperature ◽  
Kinetics Of ◽  
Holding Temperature

When failure occurs in material, it is often occurs by fracture along some grain boundaries and often by the micro-segregation of embrittling impurity to the grain boundaries. In the present work, the non-equilibrium grain-boundary segregation (NGS) kinetics of phosphorus and the temper embrittlement at the same solution treatment and different isothermal holding temperature in steel 2.25Cr1Mo are studied. The NGS kinetics curves of phosphorus at the same solution temperature （1050 oC ）and different isothermal holding temperature (540 oC and 600 oC) are given. Experimental results provide a direct evidence of NGS kinetic model and show that the grain boundary segregation concentrations of phosphorus for specimen isothermal holding at 540 oC are higher than those at 600 oC. The peak values of AES patterns of solute atoms for specimen isothermal holding at 540 oC are also higher than those at 600 oC. It is therefore concluded that the lower the isothermal holding temperature, the higher the segregation concentration of phosphorus at the grain-boundaries, and also the higher the degree of embrittlement.

Grain boundary segregation in metals

1992 ◽  
Vol 50 (2) ◽  
pp. 1204-1205
Author(s):  
C.L. Briant
Keyword(s):  
Fracture Surface ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Material Properties ◽  
Electron Spectroscopy ◽  
High Vacuum ◽  
Boundary Segregation ◽  
Grain Boundary Segregation ◽  
Local Concentration ◽  
The One

Grain boundary segregation is the process by which solute elements in a material diffuse to the grain boundaries, become trapped there, and increase their local concentration at the boundary over that in the bulk. As a result of this process this local concentration of the segregant at the grain boundary can be many orders of magnitude greater than the bulk concentration of the segregant. The importance of this problem lies in the fact that grain boundary segregation can affect many material properties such as fracture, corrosion, and grain growth.One of the best ways to study grain boundary segregation is with Auger electron spectroscopy. This spectroscopy is an extremely surface sensitive technique. When it is used to study grain boundary segregation the sample must first be fractured intergranularly in the high vacuum spectrometer. This fracture surface is then the one that is analyzed. The development of scanning Auger spectrometers have allowed researchers to first image the fracture surface that is created and then to perform analyses on individual grain boundaries.

Atomic Scale Characterisation of Electrodeposited Nanocrystalline Ni-P Alloys

1999 ◽  
Vol 581 ◽  
Author(s):  
Matthias Abraham ◽  
Mattias Thuvandert ◽  
Helen M. Lane ◽  
Alfred Cerezo ◽  
George D.W. Smith
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Three Dimensional ◽  
Boundary Segregation ◽  
Atom Probe ◽  
Atomic Scale ◽  
Grain Boundary Segregation ◽  
P Concentration

ABSTRACTNanocrystalline Ni-P alloys produced by electrodeposition have been characterised by three-dimensional atom probe (3DAP) analysis. In the as-deposited materials, there are indications of some variation in P concentration between grains and segregation to grain boundaries. After heat treatment however, strong grain boundary segregation and the formation of Ni3P precipitates have been observed.

Fracture Modes in Ll2 Compounds

1988 ◽  
Vol 133 ◽  
Author(s):  
C. L. Briant ◽  
A. I. Taub
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Intermetallic Compounds ◽  
Boundary Segregation ◽  
Grain Boundary Segregation ◽  
Fracture Modes ◽  
Beneficial Effects ◽  
Boron Segregation ◽  
Total Composition ◽  
Carbon Additions

ABSTRACTThis paper reports a study of grain boundary segregation and fracture modes in Ll2 intermetallic compounds. Data obtained on Ni3A1, Ni3Si, Ni3Ga, Ni3Ge, and Pt3Ga will be presented. It will be shown that the amount of boron segregation and its ability to improve cohesion depends on the total composition of the compound. The beneficial effects of boron can be counteracted by the presence of borides on the grain boundaries. Carbon additions also produce some improvement in ductility in Ni3Si.

Grain-Boundary Segregation and Phase-Separation Mechanism in Yttria-Stabilized Tetragonal Zirconia Polycrystal

2011 ◽  
Vol 484 ◽  
pp. 82-88
Author(s):  
Koji Matsui ◽  
Hidehiro Yoshida ◽  
Yuichi Ikuhara
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Boundary Segregation ◽  
Grain Boundary Segregation ◽  
Cubic Phase ◽  
Phase Boundaries ◽  
Transmission Electron ◽  
Sintering Condition

Microstructure development during sintering in 3 mol% Y2O3-stabilized tetragonal ZrO2 polycrystal (Y-TZP) was systematically investigated in two sintering conditions: (a) 1100-1650°C for 2 h and (b) 1300°C for 0-50 h. In the sintering condition (a), the density and grain size in Y-TZP increased with the increasing sintering temperature. Scanning transmission electron microscopy (STEM) and nanoprobe X-ray energy dispersive spectroscopy (EDS) measurements revealed that the Y3+ ion distribution was nearly homogeneous up to 1300°C, i.e., most of grains were the tetragonal phase, but cubic-phase regions with high Y3+ ion concentration were clearly formed in grain interiors adjacent to the grain boundaries at 1500°C. High-resolution transmission electron microscopy (HRTEM) and nanoprobe EDS measurements revealed that no amorphous or second phase is present along the grain-boundary faces, and Y3+ ions segregated not only along the tetragonal-tetragonal phase boundaries but also along tetragonal-cubic phase boundaries over a width below about 10 nm, respectively. These results indicate that the cubic-phase regions are formed from the grain boundaries and/or the multiple junctions in which Y3+ ions segregated. We termed this process a “grain boundary segregation-induced phase transformation (GBSIPT)” mechanism. In the sintering condition (b), the density was low and the grain-growth rate was much slow. In the specimen sintered at 1300°C for 50 h, the cubic-phase regions were clearly formed in the grain interiors adjacent to the grain boundaries. This behavior shows that the cubic-phase regions were formed without grain growth, which can be explained by the GBSIPT model.

Sign in / Sign up

Export Citation Format

Share Document