Inclined Substrate Deposition by Evaporation of Magnesium Oxide for Coated Conductors

1999 ◽  
Vol 585 ◽  
Author(s):  
Markus Bauer ◽  
Ralf Metzger ◽  
Robert Semerad ◽  
Paul Berberich ◽  
Helmut Kinder
Keyword(s):  
Electron Microscopy ◽  
Coated Conductors ◽  
The Other ◽  
Buffer Layers ◽  
Columnar Growth ◽  
Initial Momentum ◽  
3D Monte Carlo ◽  
Deposition Direction ◽  
Angle Deposition ◽  
Scanning Electron

AbstractBiaxially textured MgO buffer layers were deposited on metal substrates using “inclined substrate deposition” (ISD). The influence of the substrate inclination angle, deposition rate, and film thickness on the texture is shown. Scanning electron microscopy reveals columnar growth. We developed a growth model to explain the texturing. To test this model we have carried out 3D Monte-Carlo simulations. We find that the preferred orientation arises from mutual shadowing of the columns and directional surface diffusion due to their initial momentum.YBa2Cu3O7 (YBCO) films deposited on the ISD buffer layers are highly textured. The ab-planes of the YBCO are tilted with respect to the surface by typically 25° towards the direction of MgO vapor incidence. Therefore, the critical current density jc is anisotropic with up to 8 × 105 MA/cm2 in one direction and 4 × 105 MA/cm2 in the other. For tape coating the MgO deposition direction can be chosen so that the high jc is along the tape.

Inclined Substrate Deposition by Evaporation of Magnesium Oxide for Coated Conductors

1999 ◽  
Vol 587 ◽  
Author(s):  
Markus Bauer ◽  
Ralf Metzger ◽  
Robert Semerad ◽  
Paul Berberich ◽  
Helmut Kinder
Keyword(s):  
Electron Microscopy ◽  
Coated Conductors ◽  
The Other ◽  
Buffer Layers ◽  
Columnar Growth ◽  
Initial Momentum ◽  
3D Monte Carlo ◽  
Deposition Direction ◽  
Angle Deposition ◽  
Scanning Electron

AbstractBiaxially textured MgO buffer layers were deposited on metal substrates using “inclined substrate deposition” (ISD). The influence of the substrate inclination angle, deposition rate, and film thickness on the texture is shown. Scanning electron microscopy reveals columnar growth. We developed a growth model to explain the texturing. To test this model we have carried out 3D Monte-Carlo simulations. We find that the preferred orientation arises from mutual shadowing of the columns and directional surface diffusion due to their initial momentum.YBa2Cu3O7 (YBCO) films deposited on the ISD buffer layers are highly textured. The ab-planes of the YBCO are tilted with respect to the surface by typically 25° towards the direction of MgO vapor incidence. Therefore, the critical current density jc is anisotropic with up to 8 × 105MA/cm2 in one direction and 4 × 105MA/cm2 in the other. For tape coating the MgO deposition direction can be chosen so that the high jc is along the tape.

Use of electron microscopy to characterize the surfaces of flocculent and nonflocculent yeast cells

1989 ◽  
Vol 35 (12) ◽  
pp. 1081-1086 ◽  
Author(s):  
Byron F. Johnson ◽  
L. C. Sowden ◽  
Teena Walker ◽  
Bong Y. Yoo ◽  
Gode B. Calleja
Keyword(s):  
Electron Microscopy ◽  
Fission Yeast ◽  
Budding Yeast ◽  
The Other ◽  
Yeast Cells ◽  
Scanning Electron Micrographs ◽  
Soft Or ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Scanning Electron

The surfaces of flocculent and nonflocculent yeast cells have been examined by electron microscopy. Nonextractive preparative procedures for scanning electron microscopy allow comparison in which sharp or softened images of surface details (scars, etc.) are the criteria for relative abundance of flocculum material. Asexually flocculent budding-yeast cells cannot be distinguished from nonflocculent budding-yeast cells in scanning electron micrographs because the scar details of both are well resolved, being hard and sharp. On the other hand, flocculent fission-yeast cells are readily distinguished from nonflocculent cells because fission scars are mostly soft or obscured on flocculent cells, but sharp on nonflocculent cells. Sexually and asexually flocculent fission-yeast cells cannot be distinguished from one another as both are heavily clad in "mucilaginous" or "hairy" coverings. Examination of lightly extracted and heavily extracted flocculent fission-yeast cells by transmission electron microscopy provides micrographs consistent with the scanning electron micrographs.Key words: flocculation, budding yeast, fission yeast, scanning, transmission.

scholarly journals Effect of Surfactant Addition on Bi2Te3 Nanostructures Synthesized by Hydrothermal Method

2017 ◽  
Vol 62 (2) ◽  
pp. 1005-1010 ◽  
Author(s):  
Peyala Dharmaiah ◽  
C.H. Lee ◽  
B. Madavali ◽  
Soon-Jik Hong
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Method ◽  
Figure Of Merit ◽  
Bulk Sample ◽  
The Other ◽  
X Ray Diffraction ◽  
X Ray ◽  
Coarse Grains ◽  
Scanning Electron ◽  
Nanostructured Sample

AbstractIn the present work, we have prepared Bi2Te3nanostructures with different morphologies such as nano-spherical, nanoplates and nanoflakes obtained using various surfactant additions (EG, PVP, and EDTA) by a hydrothermal method. The shape of the nanoparticles can be controlled by addition of surfactants. The samples were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that the minority BiOCl phase disappears after maintained pH at 10 with EG as surfactant. SEM bulk microstructure reveals that the sample consists of fine and coarse grains. Temperature dependence of thermoelectric properties of the nanostructured bulk sample was investigated in the range of 300-450K. The presence of nanograins in the bulk sample exhibits a reduction of thermal conductivity and less effect on electrical conductivity. As a result, a figure of merit of the sintered bulk sample reached 0.2 at 400 K. A maximum micro Vickers hardness of 102 Hv was obtained for the nanostructured sample, which was higher than the other reported results.

Problems associated with ageing squid from their statoliths: towards a more structured approach

1994 ◽  
Vol 6 (2) ◽  
pp. 215-222 ◽  
Author(s):  
Marek R. Lipinski ◽  
M. Deon Durholtz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Regression Analysis ◽  
Light Microscopy ◽  
The Other ◽  
Etching Solution ◽  
Significant Difference ◽  
Structured Approach ◽  
Fish Otoliths ◽  
Scanning Electron

It appears that squid statoliths cannot yet be regarded as accurate an ageing tool as fish otoliths. Statoliths from the same pair, prepared differently for viewing and counting increments, were compared. Increment counts do not imply age in days, because this was not validated. One statolith from each pair was examined by light microscopy (LM) after preparation following a new method. The other was viewed by Scanning Electron microscopy (SEM) with a modified etching solution. Shape of each statolith was similar when compared by multiple regression analysis (11 variables, n=53). There was a weak but significant difference between sexes (statoliths of females were slightly larger). All other differences were insignificant. Microscopic observation and increment counts of increments were successfully carried out for 37 pairs of statoliths. Significant differences between two independent counts were found for the LM method, but no significant differences were found between two independent SEM counts. Counts were significantly different when interpreted by both LM and SEM, probably because of poor resolution in the LM readings and over-resolution (growth layers prominent and numerous) in those read by SEM. Recommendations are made on how ageing studies, based on statoliths, should be structured and the results evaluated.

Pollen morphology of Sabinaria magnifica (Cryosophileae, Coryphoideae, Arecaceae)

Phytotaxa ◽  
2015 ◽  
Vol 207 (1) ◽  
pp. 135 ◽  
Author(s):  
Giovanni Raul Bogota ◽  
Carina Hoorn ◽  
Wim Star ◽  
Rob Langelaan ◽  
Hannah Banks ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Light Microscopy ◽  
Pollen Morphology ◽  
Pollen Grains ◽  
The Other ◽  
Transmission Electron ◽  
Palm Species ◽  
Scanning Electron

Sabinaria magnifica is so far the only known species in the recently discovered tropical palm genus Sabinaria (Arecaceae). Here we present a complete description of the pollen morphology of this palm species based on light microscopy (LM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). We also made SEM-based comparisons of Sabinaria with other genera within the tribe Cryosophileae. Pollen grains of Sabinaria magnifica resemble the other genera in the heteropolar, slightly asymmetric monads, and the monosulcate and tectate exine with perforate surface. Nevertheless, there are some clear differences with Thrinax, Chelyocarpus and Cryosophila in terms of aperture and exine. S. magnifica differs from its closest relative, Itaya amicorum, in the exine structure. This study shows that a combination of microscope techniques is essential for the identification of different genera within the Cryosophileae and may also be a necessary when working with other palynologically less distinct palm genera. 

Application of UV Irradiation in Removal of Post-etch 193 nm Photoresist

2009 ◽  
Vol 1156 ◽  
Author(s):  
Quoc Toan Le ◽  
Els Kesters ◽  
L Prager ◽  
Marcel Lux ◽  
P Marsik ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Uv Irradiation ◽  
Bond Cleavage ◽  
Chemical Change ◽  
The Other ◽  
Cleaning Efficiency ◽  
Thickness Change ◽  
Methyl Pyrrolidone ◽  
193 Nm ◽  
Scanning Electron

AbstractThis study focused on the effect of UV irradiation on modification of polymethyl methacrylate-based photoresist, and then on wet photoresist (PR) removal of patterned structure (single damascene structure). Three single-wavelength UV sources were considered for PR treatment, with λ = 172, 222, and 283 nm. Modification of blanket PR was characterized using Fourier-transform infrared spectroscopy (FTIR; chemical change), spectroscopic ellipsometry (SE; thickness change), and dissolution in organic solvent (solubility change). While for patterned samples, scanning electron microscopy (SEM) was used for evaluation of cleaning efficiency. In comparison to 172 nm, the PR film irradiated by 222 nm and 283 nm photons resulted in formation of higher concentration in C=C bond. Immersion tests using pure N-methyl pyrrolidone (NMP) at 60 °C for 2 min showed that some improvement in PR removal was only observed for PR films treated by 283 nm UV for short irradiation times. Irradiation by photons at the other two wavelengths did not result in an enhancement of removal efficiency.The PR film treated by 222 nm photons was chosen for further study with O3/H2O vapor at 90°C. Experimental results showed a complete PR and BARC removal for UV-treated PR, which can be explained by C=C bond cleavage by the oxidizer.

Some possibilities of representing microcirculation in human spleen

Biologia ◽  
2009 ◽  
Vol 64 (6) ◽  
Author(s):  
Paulína Gálfiová ◽  
Ivan Varga ◽  
Martin Kopáni ◽  
Peter Michalka ◽  
Jana Michalková ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanning Confocal Microscopy ◽  
The Other ◽  
Corrosion Casts ◽  
Histochemical Analysis ◽  
Human Spleen ◽  
Scanning Confocal Microscopy ◽  
Scanning Electron

AbstractThe representation of microcirculation can be approached in several ways. One of the possibilities is to represent the endothelium (endothelial or sinus lining cells) and their basement membrane on the basis of detecting the known components and the expression of the surface antigenes by the methods of immuno-, enzyme- or lectino-histochemical analysis, or by staining or impregnation histological methods. The other possibility is the examination of samples by transmission and scanning electron microscopy. For three-dimensional demonstration corrosion casts techniques or laser scanning confocal microscopy can be used. In this paper we describe the survey of immuno-, enzyme- and lectino-histochemical characteristics of selected components of microcirculation and our own results of its demonstration in human spleen.

scholarly journals In VitroAdherence of Oral Bacteria to Different Types of Tongue Piercings

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Lucas Pereira Borges ◽  
Julio Cesar Campos Ferreira-Filho ◽  
Julia Medeiros Martins ◽  
Caroline Vieira Alves ◽  
Bianca Marques Santiago ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Bacterial Adhesion ◽  
Oral Bacteria ◽  
The Other ◽  
Control Group ◽  
Colony Forming Units ◽  
Different Types ◽  
Scanning Electron

The purpose of this work was to verifyin vitroadherence ofE. corrodensandS. oralisto the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU) and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type) were individually incubated in 5 mL of BHI broth and 50 μL of inoculum at 37°C/24 h. The other 96 piercings formed the control group and were individually incubated in 5 mL of BHI broth at 37°C/24 h. Plates were incubated at 37°C/48 h for counting of CFU/mL and data were submitted to statistical analysis (pvalue<0.05). ForE. corrodens, difference among types of material was observed (p<0.001) and titanium and surgical steel showed lower bacterial adherence. The adherence ofS. oralisdiffered among piercings, showing lower colonization (p<0.007) in titanium and surgical steel piercings. The four types of piercings were susceptible to colonization byE. corrodensandS. oralis, and bacterial adhesion was more significant in those made of Bioplast and Teflon. The piercings presented bacterial colonies on their surface, being higher in plastic piercings probably due to their uneven and rough surface.

Trachelomonas volzii vs T. dubia (Euglenophyceae)—one or two separate species? Study on similarities and differences of the species

Phytotaxa ◽  
2018 ◽  
Vol 357 (1) ◽  
pp. 1 ◽  
Author(s):  
MAŁGORZATA PONIEWOZIK ◽  
KONRAD WOŁOWSKI ◽  
JOLANTA PIĄTEK
Keyword(s):  
Electron Microscopy ◽  
The Other ◽  
New Combinations ◽  
Separate Species ◽  
Phenotypic Changes ◽  
The World ◽  
Key Features ◽  
Similarities And Differences ◽  
Species Study ◽  
Scanning Electron

This study concerns the two species Trachelomonas volzii and T. dubia which were examined for similarities and dissimilarities of their loricae and monads organization. We specifically focused on the key features of both species that were originally used to separate one from the other: annular thickening at the base of collar and dimensions and ornamentation of loricae. Loricae of specimens were examined by light and scanning electron microscopy and the results were compared with the literature data describing these taxa and reported occurrences in the world. The species together with their varieties and forms do not appear to have strong characteristics distinguishing them, rather the variability observed fits natural phenotypic changes. Based on evidence from this study, we recommend combining these two taxa and propose T. volzii as the single taxon. We also examined a set of varieties of original T. volzii since the species contained several varieties that were almost identical in relation to lorica structure and occurrence. As a result of these observations, we propose the following varieties: Trachelomonas volzii var. volzii as a nominative variety, T. volzii var. australis, T. volzii var. sulcata, T. volzii var. inflata, T. volzii var. acidophila. Furthermore, we propose reclassifying some taxa and the new combinations such as: T. dubia var. ornata to T. volzii var. ornata and T. dubia var. colliundulata to T. volzii var. colliundulata. In our opinion, T. dubia fo. acuminata should be included with the species T. hexangulata due to its unique, hexagonal shaped lorica.

Fine morphology of the cuticle surface of Chordodes anthophorus and reinterpretation of C. aquaeductus, C. ferganensis and C. oscillatus (Gordiida Nematomorpha)

Zootaxa ◽  
2007 ◽  
Vol 1397 (1) ◽  
pp. 39-45 ◽  
Author(s):  
CRISTINA DE VILLALOBOS ◽  
FERNANDA ZANCA ◽  
SERGEI SPIRIDONOV
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Central Asia ◽  
The Other ◽  
Species Status ◽  
Taxonomic Descriptions ◽  
Former Ussr ◽  
Fine Morphology ◽  
Scanning Electron

We reinvestigate four species of the genus Chordodes from Central Asia and one from Georgia (Transcaucasian part of former USSR) in order to certify the taxonomic descriptions and verify the species status. By scanning electron microscopy, we demonstrate characteristic cuticular patterns for Chordodes anthophorus. The other three species, C. aquaeductus, C. ferganensis and C. oscillatus are synonymized with C. anthophorus because no differences were detected.

Sign in / Sign up

Export Citation Format

Share Document