Building Two and Three-dimensional Structures of Colloidal Particles on Surfaces using Optical Tweezers and Critical Point Drying

2001 ◽  
Vol 705 ◽  
Author(s):  
Dirk L. J. Vossen ◽  
Jacob P. Hoogenboom ◽  
Karin Overgaag ◽  
Alfons van Blaaderen
Keyword(s):  
Critical Point ◽  
Optical Tweezers ◽  
Colloidal Particles ◽  
Three Dimensional ◽  
Silica Shell ◽  
Dimensional Structure ◽  
Layer By Layer ◽  
Two Dimensional ◽  
Critical Point Drying ◽  
Shell Particles

AbstractWe describe a method for patterning substrates with colloidal particles in any designed two-dimensional structure. By using optical tweezers particles are brought from a reservoir to a surface that carries a surface charge opposite to that of the particles. Using this technique large, two-dimensional patterns can be created, where the pattern can be manipulated on a single particle level. We show that these structures can be dried using critical point drying thus preventing distortions due to surface tension forces. After drying patterned surfaces can be used for further processing, which includes repeating the procedure of patterning. We show some first results of three-dimensional structures created using this layer-by-layer method. The method is generally applicable and has been demonstrated for a variety of (core-shell) colloidal particles including particles that are interesting for photonic applications like high-refractive index (ZnS)-core – silica shell particles, metallodielectric (gold)-core – silica-shell particles, fluorescently labeled particles and small (several nanometers large) gold particles. Particle sizes used range from a few nanometers to several micrometers.

scholarly journals Structural diversity induced by ligand geometry: From two-dimensional to three-dimensional coordination polymers with pyridine

2020 ◽  
pp. 174751982096816
Author(s):  
Fang-Kuo Wang ◽  
Shi-Yao Yang ◽  
Hua-Ze Dong
Keyword(s):  
Coordination Polymers ◽  
Three Dimensional ◽  
Structural Diversity ◽  
Dimensional Structure ◽  
Layer By Layer ◽  
Two Dimensional ◽  
Guest Molecules ◽  
X Ray ◽  
Benzenedicarboxylic Acid ◽  
Benzenetricarboxylic Acid

Two coordination polymers with two-dimensional and three-dimensional structures are, {[Zn3(bdc)3(py)2]·2NMP}n (1) (H2bdc = 1,4-benzenedicarboxylic acid) and [Zn2(NO3−)(btc)(nmp)2(py)]n (2) (H3btc = 1,3,5-benzenetricarboxylic acid), synthesized by hot-solution reactions of Zn(NO3)2·6H2O, pyridine (py) and two different ligands in N-methylpyrrolidone (NMP). {[Zn3(bdc)3(py)2]·2NMP}n exhibits two-dimensional networks with trizinc subunits [Zn3(COO)6py2] stacking with a layer-by-layer alignment, and there are strong π–π interactions involving py from adjacent layers. [Zn2(NO3−)(btc)(nmp)2(py)]n has a three-dimensional structure containing two independent zinc ions, tetrahedral ZnO4 and octahedral ZnNO5. Based on X-ray studies, the coordination polymers {[Zn3(bdc)3(py)2]·2NMP}n (1) have a porous structure with NMP guest molecules. In contrast, X-ray studies revealed that coordination polymer [Zn2(NO3−)(btc)(nmp)2(py)]n (2) had a larger void that was inhabited by coordinated py and NMP. In addition, the form of the two coordination polymers changed from two-dimensional to three-dimensional with transformation of the ligand geometry.

Revealing gross three-dimensional structure in the SEM

1987 ◽  
Vol 45 ◽  
pp. 656-657
Author(s):  
Sterling P. Newberry
Keyword(s):  
Freeze Drying ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Small Object ◽  
Final Solution ◽  
Dimensional Representation ◽  
X Ray ◽  
Three Dimensional Representation ◽  
Freeze Dried ◽  
Critical Point Drying

The beautiful three dimensional representation of small object surfaces by the SEM leads one to search for ways to open up the sample and look inside. Could this be the answer to a better microscopy for gross biological 3-D structure? We know from X-Ray microscope images that Freeze Drying and Critical Point Drying give promise of adequately preserving gross structure. Can we slice such preparations open for SEM inspection? In general these preparations crush more readily than they slice. Russell and Dagihlian got around the problem by “deembedding” a section before imaging. This some what defeats the advantages of direct dry preparation, thus we are reluctant to accept it as the final solution to our problem. Alternatively, consider fig 1 wherein a freeze dried onion root has a window cut in its surface by a micromanipulator during observation in the SEM.

Three-Dimensional Structure of Cloned T3 Connector Protein at 1.6nm Resolution

1990 ◽  
Vol 48 (1) ◽  
pp. 282-283
Author(s):  
José L. Carrascosa ◽  
José M. Valpuesta ◽  
Hisao Fujisawa
Keyword(s):  
Dna Sequences ◽  
Expression Vector ◽  
Three Dimensional ◽  
Deae Cellulose ◽  
Dna Packaging ◽  
Dimensional Structure ◽  
Two Dimensional ◽  
Freezing And Thawing ◽  
Three Dimensional Structure ◽  
Dimensional Reconstruction

The head to tail connector of bacteriophages plays a fundamental role in the assembly of viral heads and DNA packaging. In spite of the absence of sequence homology, the structure of connectors from different viruses (T4, Ø29, T3, P22, etc) share common morphological features, that are most clearly revealed in their three-dimensional structure. We have studied the three-dimensional reconstruction of the connector protein from phage T3 (gp 8) from tilted view of two dimensional crystals obtained from this protein after cloning and purification.DNA sequences including gene 8 from phage T3 were cloned, into Bam Hl-Eco Rl sites down stream of lambda promotor PL, in the expression vector pNT45 under the control of cI857. E R204 (pNT89) cells were incubated at 42°C for 2h, harvested and resuspended in 20 mM Tris HC1 (pH 7.4), 7mM 2 mercaptoethanol, ImM EDTA. The cells were lysed by freezing and thawing in the presence of lysozyme (lmg/ml) and ligthly sonicated. The low speed supernatant was precipitated by ammonium sulfate (60% saturated) and dissolved in the original buffer to be subjected to gel nitration through Sepharose 6B, followed by phosphocellulose colum (Pll) and DEAE cellulose colum (DE52). Purified gp8 appeared at 0.3M NaCl and formed crystals when its concentration increased above 1.5 mg/ml.

scholarly journals Mechanochemical Synthesis of a Mercury(II) Metal-Organic Framework Reveals a Two-Dimensional Polymorph Stabilized by Weak Interactions

2019 ◽  
Author(s):  
Isaiah R. Speight ◽  
Igor Huskić ◽  
Mihails Arhangelskis ◽  
Hatem M. Titi ◽  
Robin Stein ◽  
...  
Keyword(s):  
Density Functional ◽  
Weak Interactions ◽  
Metal Organic Framework ◽  
Three Dimensional ◽  
Density Functional Theory Calculations ◽  
Dimensional Structure ◽  
Reaction Monitoring ◽  
Two Dimensional ◽  
Functional Theory ◽  
Metal Organic

Solid-state mechanochemistry revealed a novel polymorph of the mercury(II) imidazolate framework, based on square-grid (sql) topology layers. Reaction monitoring and periodic density functional theory calculations show that the sql-structure is of higher stability than the previously reported three-dimensional structure, with the unexpected stabilization of a lower dimensionality structure explained by contributions of weak interactions, which include short C-H···Hg contacts.

scholarly journals Network of Palladium-Based Nanorings Synthesized by Liquid-Phase Reduction Using DMSO-H2O: In Situ Monitoring of Structure Formation and Drying Deformation by ASEM

2020 ◽  
Vol 21 (9) ◽  
pp. 3271 ◽  
Author(s):  
Takuki Komenami ◽  
Akihiro Yoshimura ◽  
Yasunari Matsuno ◽  
Mari Sato ◽  
Chikara Sato
Keyword(s):  
Surface Tension ◽  
Liquid Phase ◽  
Aqueous Solutions ◽  
Critical Point ◽  
Synthesis Method ◽  
Three Dimensional ◽  
In Situ Monitoring ◽  
Critical Point Drying ◽  
Micrometer Size

We developed a liquid-phase synthesis method for Pd-based nanostructure, in which Pd dissolved in dimethyl sulfoxide (DMSO) solutions was precipitated using acid aqueous solution. In the development of the method, in situ monitoring using atmospheric scanning electron microscopy (ASEM) revealed that three-dimensional (3D) Pd-based nanonetworks were deformed to micrometer-size particles possibly by the surface tension of the solutions during the drying process. To avoid surface tension, critical point drying was employed to dry the Pd-based precipitates. By combining ASEM monitoring with critical point drying, the synthesis parameters were optimized, resulting in the formation of lacelike delicate nanonetworks using citric acid aqueous solutions. Precipitation using HCl acid aqueous solutions allowed formation of 500-nm diameter nanorings connected by nanowires. The 3D nanostructure formation was controllable and modifiable into various shapes using different concentrations of the Pd and Cl ions as the parameters.

scholarly journals Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

1983 ◽  
Vol 96 (5) ◽  
pp. 1400-1413 ◽  
Author(s):  
R Niederman ◽  
P C Amrein ◽  
J Hartwig
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Molar Ratio ◽  
Computer Assisted ◽  
Three Dimensional Structure ◽  
Actin Binding Protein ◽  
Critical Point Drying

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

Poly[deca-μ2-cyanido-dicyanidobis(μ2-ethylenediamine)bis(ethylenediamine)tricadmium(II)dicobalt(III)]: a two-dimensional coordination polymer

2009 ◽  
Vol 65 (3) ◽  
pp. m118-m120
Author(s):  
Olha Sereda ◽  
Helen Stoeckli-Evans
Keyword(s):  
Coordination Polymer ◽  
Network Structure ◽  
General Position ◽  
Rotation Axis ◽  
Three Dimensional ◽  
The Other ◽  
Dimensional Structure ◽  
Two Dimensional ◽  
Asymmetric Unit ◽  
Dimensional Network

The title coordination polymer, [Cd3Co2(CN)12(C2H8N2)4]n, has an infinite two-dimensional network structure. The asymmetric unit is composed of two crystallographically independent CdIIatoms, one of which is located on a twofold rotation axis. There are two independent ethylenediamine (en) ligands, one of which bis-chelates to the Cd atom that sits in a general position, while the other bridges this Cd atom to that sitting on the twofold axis. The Cd atom located on the twofold rotation axis is linked to four equivalent CoIIIatomsviacyanide bridges, while the Cd atom that sits in a general position is connected to three equivalent CoIIIatomsviacyanide bridges. In this way, a series of trinuclear, tetranuclear and pentanuclear macrocycles are linked to form a two-dimensional network structure lying parallel to thebcplane. In the crystal structure, these two-dimensional networks are linkedviaN—H...N hydrogen bonds involving an en NH2H atom and a cyanide N atom, leading to the formation of a three-dimensional structure. This coordination polymer is only the second example involving a cyanometallate where the en ligand is present in both chelating and bridging coordination modes.

Sign in / Sign up

Export Citation Format

Share Document