Nanoporous thermosets via Reactive Encapsulation of a Chemically Inert Solvent versus Free Radically Polymerized and Phase Separating Systems

2003 ◽  
Vol 788 ◽  
Author(s):  
Vijay I. Raman ◽  
Giuseppe R. Palmese
Keyword(s):  
Porous Materials ◽  
Pore Size ◽  
Polymeric Materials ◽  
Supercritical Drying ◽  
Structural Features ◽  
Polymerization Reaction ◽  
Sensors And Actuators ◽  
Separation Membranes ◽  
Inert Solvent ◽  
Free Radical Chemistry

ABSTRACTNanoporous thermosets are used as polyelectrolytes in fuel cells, separation membranes, and sensors and actuators, etc. Design of nanoporous thermosets for such applications entails controlling permeability by tailoring the pore size and pore chemistry. Usually free radically polymerizing and simultaneously phase separating systems are used to synthesize porous thermosets. A novel method of synthesizing nanoporous polymeric materials is employed in this work. This technique involves the synthesis of nanoporous thermosets by reactive encapsulation of an inert solvent using step-growth crosslinking polymerization reaction carried out until completion without phase separation into macroscopic phases. Key structural features of the porous materials synthesized by the reactive encapsulation technique were investigated by Scanning Electron Microscopy (SEM) after extraction and supercritical drying using carbon dioxide. Micrographs of the materials synthesized using the reactive encapsulation technique showed that the porous materials of pore size less than 100nm are obtained. Micrographs also showed that the reactive encapsulation technique can be employed to synthesize nanoporous polymeric materials of desired porosity and pore size by changing the solvent content. In addition, porous thermosets were also synthesized using free radical chemistry and phase separating system. The differences in the porous morphology of both these systems were enunciated using SEM micrographs.

scholarly journals Porous Characteristics of Three-Dimensional Disordered Graphene Networks

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 127
Author(s):  
YongChao Wang ◽  
YinBo Zhu ◽  
HengAn Wu
Keyword(s):  
Pore Size ◽  
Low Temperatures ◽  
Gas Adsorption ◽  
Three Dimensional ◽  
Md Simulations ◽  
Structural Features ◽  
Atomic Scale ◽  
Critical Factors ◽  
Chlorination Process ◽  
Porous Morphology

The porous characteristics of disordered carbons are critical factors to their performance on hydrogen storage and electrochemical capacitors. Even though the porous information can be estimated indirectly by gas adsorption experiments, it is still hard to directly characterize the porous morphology considering the complex 3D connectivity. To this end, we construct full-atom disordered graphene networks (DGNs) by mimicking the chlorination process of carbide-derived carbons using annealing-MD simulations, which could model the structure of disordered carbons at the atomic scale. The porous characteristics, including pore volume, pore size distribution (PSD), and specific surface area (SSA), were then computed from the coordinates of carbon atoms. From the evolution of structural features, pores grow dramatically during the formation of polyaromatic fragments and sequent disordered framework. Then structure is further graphitized while the PSD shows little change. For the obtained DGNs, the porosity, pore size, and SSA increase with decreasing density. Furthermore, SSA tends to saturate in the low-density range. The DGNs annealed at low temperatures exhibit larger SSA than high-temperature DGNs because of the abundant free edges.

Positronium Thermalization Process in Nanoporous Materials and its Influence on the Shape of PALS Spectrum

2008 ◽  
Vol 607 ◽  
pp. 39-41
Author(s):  
Jerzy Kansy ◽  
Radosław Zaleski
Keyword(s):  
Mesoporous Silica ◽  
Pore Size Distribution ◽  
Porous Materials ◽  
Pore Size ◽  
Size Distribution ◽  
Nanoporous Materials ◽  
New Method ◽  
New Model ◽  
Conventional Models ◽  
Mcm 41

A new method of analysis of PALS spectra of porous materials is proposed. The model considers both the thermalization process of positronium inside the pores and the pore size distribution. The new model is fitted to spectra of mesoporous silica MCM-41 and MSF. The resulting parameters are compared with parameters obtained from fitting the “conventional” models, i.e. a sum of exponential components with discrete or/and distributed lifetimes.

Fabrication of Carbon Aerogels

2006 ◽  
Vol 11-12 ◽  
pp. 19-22 ◽  
Author(s):  
Y.N. Feng ◽  
Lei Miao ◽  
Yong Ge Cao ◽  
T. Nishi ◽  
Sakae Tanemura ◽  
...  
Keyword(s):  
Pore Size ◽  
Sol Gel ◽  
Supercritical Drying ◽  
Limited Range ◽  
Molar Ratio ◽  
Carbon Aerogels ◽  
Resorcinol Formaldehyde ◽  
Catalyst Content ◽  
Fabrication Parameters ◽  
Pyrolysis Processes

RF (Resorcinol-Formaldehyde) aerogels and carbon aerogels were prepared through the sol-gel method following the routes of polymerization, gelation, supercritical drying and pyrolysis processes. The influence of fabrication parameters on the textural structure of the samples, e.g., specific surface area, pore size, and pore size distribution, etc., were systematically investigated. With a decrease in the R/F molar ratio, or an increase in the catalyst content within a limited range, the porosity of the nanostructure materials increases. The optimal temperature of pyrolysis for RF aerogel was investigated by TGA (Thermogravimetric Analysis).

Numerical Investigation of Heat Transfer Enhancement Inside the Pipes Filled With Radial Pore-Size Gradient Porous Materials

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
Peiyong Ma ◽  
Baogang Wang ◽  
Shuilin Chen ◽  
Xianwen Zhang ◽  
Changfa Tao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Porous Materials ◽  
Pore Size ◽  
Flow Resistance ◽  
Heat Transfer Performance ◽  
Evaluation Criteria ◽  
Field Synergy ◽  
Transfer Enhancement ◽  
Size Gradient ◽  
Opening Up

The gradient porous materials (GPMs)-filled pipe structure has been proved to be effective in improving the heat transfer ability and reducing pressure drop of fluid. A GPMs-filled pipe structure in which radial pore-size gradient increased nonlinearly has been proposed. The field synergy theory and tradeoff analysis on the efficiency of integrated heat transfer has been accomplished based on performance evaluation criteria (PEC). It was found that the ability of heat transfer was enhanced considerably, based on the pipe structure, in which the pore-size of porous materials increased as a parabolic opening up. The flow resistance was the lowest and the integrated heat transfer performance was the highest when radial pore-size gradient increasing as a parabolic opening down.

scholarly journals Probe material choice for nuclear magnetic resonance cryoporometry (NMRC) measurements of the nano-scale pore size distribution of unconventional reservoirs

2018 ◽  
Vol 37 (1) ◽  
pp. 412-428
Author(s):  
Feng Zhu ◽  
Wenxuan Hu ◽  
Jian Cao ◽  
Biao Liu ◽  
Yifeng Liu ◽  
...  
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Pore Size Distribution ◽  
Porous Materials ◽  
Pore Size ◽  
Size Distribution ◽  
Geological Samples ◽  
Nano Scale ◽  
Chloride Hexahydrate ◽  
Nuclear Magnetic

Nuclear magnetic resonance cryoporometry is a newly developed technique that can characterize the pore size distribution of nano-scale porous materials. To date, this technique has scarcely been used for the testing of unconventional oil and gas reservoirs; thus, their micro- and nano-scale pore structures must still be investigated. The selection of the probe material for this technique has a key impact on the quality of the measurement results during the testing of geological samples. In this paper, we present details on the nuclear magnetic resonance cryoporometric procedure. Several types of probe materials were compared during the nuclear testing of standard nano-scale porous materials and unconventional reservoir geological samples from Sichuan Basin, Southwest China. Gas sorption experiments were also carried out on the same samples simultaneously. The KGT values of the probe materials octamethylcyclotetrasiloxane and calcium chloride hexahydrate were calibrated using standard nano-scale porous materials to reveal respective values of 149.3 Knm and 184 Knm. Water did not successfully wet the pore surfaces of the standard controlled pore glass samples; moreover, water damaged the pore structures of the geological samples, which was confirmed during two freeze-melting tests. The complex phase transition during the melting of cyclohexane introduced a nuclear magnetic resonance signal in addition to that from liquid in the pores, which led to an imprecise characterization of the pore size distribution. Octamethylcyclotetrasiloxane and calcium chloride hexahydrate have been rarely employed as nuclear magnetic resonance cryoporometric probe materials for the testing of an unconventional reservoir. Both of these materials were able to characterize pore sizes up to 1 μm, and they were more applicable than either water or cyclohexane.

scholarly journals Development of Mass Production Technology of Highly Permeable Nano-Porous Supports for Silica-Based Separation Membranes

Membranes ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 103 ◽  
Author(s):  
Sawamura ◽  
Okamoto ◽  
Todokoro
Keyword(s):  
Pore Size ◽  
Mass Production ◽  
Porous Silica ◽  
Industrial Applications ◽  
High Permeability ◽  
Separation Membranes ◽  
Membrane Defects ◽  
Porous Supports ◽  
Harsh Conditions

Silica-based membranes show both robust properties and high-permeability, offering us great potential for applying them to harsh conditions where conventional organic membranes cannot work. Despite the increasing number of paper and patents of silica-based membranes, their industrial applications have yet to be fully realized, possibly due to their lack of technologies on scaling-up and mass production. In particular, quality of membrane supports decisively impacts final quality of silica-based separation membranes. In this study, therefore, we have developed mass producing technologies of nano-porous supports (φ 12 mm, length 400 mm) with surface center pore size distribution of 1–10 nm, which are generally used as supports for preparing separation membranes with a pore size of less than 1 nm. The developed mass production apparatuses have enabled us to reproducibly produce nano-porous silica-based supports with high permeance (e.g., N2 permeance of more than 10−5 mol m−2 s−1·Pa−1) minimizing effects of membrane defects less than 0.1% of the total flux. The developed nano-porous supports have enabled us to reproducibly produce silica-based separation membranes with high permeace and selectivity (e.g., H2 permeance of about 5 × 10−6 mol m−2 s−1 Pa−1 and H2/SF6 permeance ratio of more than 2000).

Sign in / Sign up

Export Citation Format

Share Document