Use of Ferrofluid Patterns as Diffusion Masks

2005 ◽  
Vol 877 ◽  
Author(s):  
Derek Halverson ◽  
Ben Yellen ◽  
Sameer Kalghatgi ◽  
Gary Friedman

AbstractA novel method of dynamically and selectively controlling the diffusion of molecules using aggregation of ferrofluid is proposed. This method can be used to mask specific locations on a surface for combinatorial chemistry or to restrict diffusion of molecules in selected areas in a microfluidic device. This method works by using the controlled aggregation of stabilized 10nm diameter iron oxide particles (ferrofluid) to slow the diffusion of molecules in a similar manner as to how a porous media restricts diffusion. Dynamic aggregate formation is controlled by a magnetic pattern on a substrate in conjunction with an external field. The external magnetic field bias applied to the system causes ferrofluid to aggregate only in designated areas around the magnetic patterns thereby slowing diffusion through the areas where the aggregate clouds have formed.

2005 ◽  
Vol 877 ◽  
Author(s):  
Derek Halverson ◽  
Ben Yellen ◽  
Gary Friedman

AbstractA novel method is proposed whereby non-magnetic objects can be moved along a surface at the microscale and nanoscale. It uses a negative magnetophoretic force, explained in the caption for figure one, on the non-magnetic objects which results from stabilized 10nm diameter iron oxide particles (ferrofluid) being attracted to regions of field maxima around magnetic islands on a surface, which pushes the non-magnetic objects to regions of field minima. By varying an external magnetic field we can control where these minima are and thus control how objects will position themselves with static fields and by using rotating time varying fields we can control how they move across the surface. This method does not require the objects to be initially in contact with the surface, as they will be pulled down to the surface from solution. While this paper deals with beads, any arbitrarily shaped object should be manipuable using this method. Additionally, while we address non-magnetic objects in this work similar methods could easily manipulate objects that are magnetic.


2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Mahla Mirzaee-Kakhki ◽  
Adrian Ernst ◽  
Daniel de las Heras ◽  
Maciej Urbaniak ◽  
Feliks Stobiecki ◽  
...  

Abstract Detailed control over the motion of colloidal particles is relevant in many applications in colloidal science such as lab-on-a-chip devices. Here, we use an external magnetic field to assemble paramagnetic colloidal spheres into colloidal rods of several lengths. The rods reside above a square magnetic pattern and are transported via modulation of the direction of the external magnetic field. The rods behave like bipeds walking above the pattern. Depending on their length, the bipeds perform topologically distinct classes of protected walks. We design parallel polydirectional modulation loops of the external field that command up to six classes of bipeds to walk on distinct predesigned paths. Using such loops, we induce the collision of reactant bipeds, their polymerization addition reaction to larger bipeds, the separation of product bipeds from the educts, the sorting of different product bipeds, and also the parallel writing of a word consisting of several letters. Our ideas and methodology might be transferred to other systems for which topological protection is at work.


2009 ◽  
Vol 50 ◽  
pp. S195-S196
Author(s):  
J.R. Zuchini ◽  
C.H. Huang ◽  
S.C. Huang ◽  
Y.H. Shih ◽  
H.W. Tsai ◽  
...  

Author(s):  
Yanjuan Zhang ◽  
Zhengqing Yang ◽  
Decai Li

The sleeve of roller chain periodically squeezes the pin during the process of chain transmission. The lubrication oil located in the gap of the sleeve and pin will be pushed out and cannot be restored automatically. The absence of sufficient lubricating oil can cause friction, wear, and even the roller chain failure between the pin and the sleeve. This article presents a novel method and a new type of chain structure to lubricant roller chain with ferrofluids, which is capable of prolonging the service life of roller chain. The results show that ferrofluids can be remained in the clearance between the sleeve and the pin shaft under the effect of external magnetic field. The ferrofluids that were squeezed out of the clearance can be restored automatically, which ensure the reliability of chain transmission. And the external magnetic field effectively prevents the chain lubrication leakage due to the edge effect of the magnetic field.


PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0246124
Author(s):  
Oladunni B. Adeyiga ◽  
Coleman Murray ◽  
Hector E. Muñoz ◽  
Alberto Escobar ◽  
Dino Di Carlo

Magnetic ratcheting cytometry is a promising approach to separate magnetically-labeled cells and magnetic particles based on the quantity of magnetic material. We have previously reported on the ability of this technique to separate magnetically-labeled cells. Here, with a new chip design, containing high aspect ratio permalloy micropillar arrays, we demonstrate the ability of this technique to rapidly concentrate and collect superparamagnetic iron oxide particles. The platform consists of a mechatronic wheel used to generate and control a cycling external magnetic field that impinges on a “ratcheting chip.” The ratcheting chip is created by electroplating a 2D array of high aspect ratio permalloy micropillars onto a glass slide, which is embedded in a thin polymer layer to create a planar surface above the micropillars. By varying magnetic field frequency and direction through wheel rotation rate and angle, we direct particle movement on chip. We explore the operating conditions for this system, identifying the effects of varying ratcheting frequency, along with time, on the dynamics and resulting concentration of these magnetic particles. We also demonstrate the ability of the system to rapidly direct the movement of superparamagnetic iron oxide particles of varying sizes. Using this technique, 2.8 μm, 500 nm, and 100 nm diameter superparamagnetic iron oxide particles, suspended within an aqueous fluid, were concentrated. We further define the ability of the system to concentrate 2.8 μm superparamagnetic iron oxide particles, present in a liquid suspension, into a small chip surface area footprint, achieving a 100-fold surface area concentration, and achieving a concentration factor greater than 200%. The achieved concentration factor of greater than 200% could be greatly increased by reducing the amount of liquid extracted at the chip outlet, which would increase the ability of achieving highly sensitive downstream analytical techniques. Magnetic ratcheting-based enrichment may be useful in isolating and concentrating subsets of magnetically-labeled cells for diagnostic automation.


2000 ◽  
Vol 83 (12) ◽  
pp. 2901-2906 ◽  
Author(s):  
Kazuyuki Hayashi ◽  
Mamoru Kamigaki ◽  
Hiroko Morii ◽  
Kikuo Okuyama

Sign in / Sign up

Export Citation Format

Share Document