Bass Handbells of Aluminum

MRS Bulletin ◽  
1995 ◽  
Vol 20 (3) ◽  
pp. 40-43 ◽  
Author(s):  
Thomas D. Rossing ◽  
Deepak Gangadharan ◽  
Edward R. Mansell ◽  
Jacob H. Malta

Handbells have become very popular musical instruments, especially in schools and churches; about 40,000 hand-bell choirs have been reported in the United States alone. Tuned handbells are generally made of cast bronze, which has been the traditional bell material for many centuries.Demand for handbells of lower and lower pitches has led to the development of bass bells as low as G0 (fundamental frequency of 24.5 Hz). Unfortunately, these large bass bells radiate inefficiently, especially the bells made of bronze. This is because the speed of bending waves in these bells is considerably lower than the speed of sound in air, a condition known as “being below the coincidence frequency.”In order to obtain a higher radiation efficiency and thereby enhance the sound of bass bells, the Malmark Company has created a new bell design using aluminum rather than bronze. These bells are larger in diameter, and they have lower coincidence frequencies, both of which lead to more efficient radiation of bass notes. In addition, they are considerably lighter in weight, and thus are much more easily handled by bell ringers.In this article, the acoustical properties of two G1 handbells, one of aluminum and one of bronze, are compared. The aluminum handbell has a diameter of 48.5 cm, a height of 34 cm, and a wall thickness from 4 to 5 mm. The bronze bell has a diameter of 38.5 cm, a height of 28.5 cm, and a wall thickness from 3 to 4 mm.

Author(s):  
Derek W. Vaillant

This chapter sketches the history of U.S–French electronic communications prior to the rise of U.S.–French radio broadcasting. Focusing primarily on France, it analyzes the anticipatory and reactive discourses to live interwar transatlantic broadcast connectivity with the United States. The period saw two contrasting, nationally inflected techno-aesthetics take shape in America and France that defined excellence in radio. In America, technological power, abundance, and high-speed execution demonstrated professional competence and efficiency. The French emphasized quality, accepted scarcity, and valued deliberate speed. More than extensions of preexisting differences in U.S. and French cultural conventions these broadcast paradigms emerged relationally and cross-nationally to shape the future of U.S.–French broadcast interaction and the character of an evolving international medium.


Author(s):  
Hai-Chao Han ◽  
Avione Y. Lee ◽  
Ramsey H. Shadfan ◽  
Yangming Xiao

Rupture of aneurysms is a leading cause of death in the United States. Extensive biomechanical studies have shown that mechanical stress in aneurysm walls plays a critical role in the rupture of aneurysms. Highly elevated local stress and degraded aneurismal walls are believed to make aneurysms vulnerable to rupture [1–3]. Asymmetric aneurysms with irregular shape and wall thickness are vulnerable to rupture. Aneurismal arteries are often tortuous such as in the Loeys-Dietz syndrome [4], but the mechanism is unclear.


Plant Disease ◽  
2021 ◽  
Author(s):  
Devin Bily ◽  
Ekaterina V. Nikolaeva ◽  
Tracey Olson ◽  
Scott Rebert ◽  
Seogchan Kang ◽  
...  

Aloe vera (L.) Burm. f. is a tropical evergreen perennial in the family Liliaceae. Native to the Arabian Peninsula, it is sold in Pennsylvania as an ornamental and for its medical and topical purposes due to its high levels of amino acids, anthraquinones, saponins, and vitamins A, B, C, E (Sahu et al. 2013). In February 2020, at an ornamental plant nursery in Lancaster County, Pennsylvania, 5 out of 15 mature A. vera plants in 15 cm pots showed symptoms and signs of rust on the leaves, exhibiting dark-brown erumpent pycnial spots with a chlorotic band surrounding the infected tissue that turned necrotic after three days of incubation at 20°C. Only the telial stage was present. Sori (n=25) were rounded, concentrically arranged, 0.2-3.7 mm, and covered by a brown epidermis. Teliospores (n=40) were amphigenous, orange-brown, globose to ellipsoidal, measuring (29.2) 30.4-36.1 (39.5) × (27.4) 27.6-30.1 (30.5) µm, with a wall thickness of 4-5 µm, and a persistent hyaline pedicel ranging from 5 to 57.1 µm in length and 5.2 to 9.3 µm in width. These measurements were comparable to the descriptions of Uromyces aloes previously reported from India (teliospore size 25-42.5 x 20-30 µm, wall thickness 3-5 µm, and pedicel size 25-95 x 5-6.25 µm), and South Africa (teliospore size 30-44 x 24-32 µm, wall thickness 4-6 µm, and pedicel size 6-20 µm) (Maier et al. 2007; Soni et al. 2011). Based on these morphological traits and the plant host, the causal agent was identified as Uromyces aloes (Cooke) Magnus (Pucciniaceae, Uredinales). The sample was also independently identified as U. aloes by the USDA APHIS PPQ Beltsville lab (Interception # APEMD200552555001) based on morphological characteristics. Teliospores were harvested with a sterile pin, transferred to a 1.5 ml tube with DNA extraction buffer (100 mM Tris-HCL, 10 mM EDTA, 1 M KCl, pH 8) and macerated using a plastic mini-pestle. The DNA was precipitated using isopropanol, washed with 70% ethanol, and reconstituted in 50 µl of PCR-grade water. The segment of the internal transcribed spacer region (ITS) was amplified using ITS4/ITS5 primers (White et al. 1990). The nuclear ribosomal small subunit (18S) was amplified with rust specific primers Rust18S-R (Aime 2006) and NS1 (White et al. 1990). The nuclear ribosomal large subunit (28S) was amplified with primers LR0R and LR7 (Vilgalys et al. 1990). Amplified PCR products were cleaned using ExoSap (Affymetrix, Santa Clara, CA) or QIAquick PCR Purification Kit (Qiagen, Valencia, CA) and sequenced at Penn State Genomics Core Facility. The nucleotide sequences were trimmed, analyzed, and aligned using Geneious 11.1.5 software (Biomatters, Auckland, NZ). The resulting 692-bp segment of the ITS, 1,633-bp segment of the 18S, and the 1,324-bp segment of the 28S regions were deposited in the GenBank database under accession numbers MT136509, MZ146345, and MZ146342, respectively. Based on GenBank BLAST analysis, a 529-bp fragment of our 28S product was found to share 98.87% (523/529) identity with U. aloes isolate WM3290 (DQ917740) from South Africa, with three nucleotide differences and three gaps between the two strains. Comparisons among ITS and 18S sequences could not be made because no ITS or 18S sequence data from U. aloes has previously been deposited in GenBank. To our knowledge, this is the first report of U. aloes from A. vera in the United States. Infected plants were confined inside a greenhouse and have been destroyed. Since the plants were purchased from either Ontario, Canada or Florida, the extent of infection in the United States is unknown.


Author(s):  
Krystyn R. Moon

Performers of Asian ancestry worked in a variety of venues and media as part of the American entertainment industry in the 19th and early 20th centuries. Some sang Tin Pan Alley numbers, while others performed light operatic works. Dancers appeared on the vaudeville stage, periodically in elaborate ensembles, while acrobats from China, India, and Japan wowed similar audiences. Asian immigrants also played musical instruments at community events. Finally, a small group lectured professionally on the Chautauqua Circuit. While on the stage, these performers had to navigate American racial attitudes that tried to marginalize them. To find steady work, performers of Asian ancestry often had to play to stereotypes popular with white audiences. Furthermore, they faced oversight by immigration authorities, who monitored their movements in and around the country and made it difficult for foreign entertainers to work in the country for long periods of time. Despite these hurdles, Asians and Asian Americans have appeared in the performing arts in the United States for over one hundred years.


Author(s):  
A. Hakam ◽  
J.T. Gau ◽  
M.L. Grove ◽  
B.A. Evans ◽  
M. Shuman ◽  
...  

Prostate adenocarcinoma is the most common malignant tumor of men in the United States and is the third leading cause of death in men. Despite attempts at early detection, there will be 244,000 new cases and 44,000 deaths from the disease in the United States in 1995. Therapeutic progress against this disease is hindered by an incomplete understanding of prostate epithelial cell biology, the availability of human tissues for in vitro experimentation, slow dissemination of information between prostate cancer research teams and the increasing pressure to “ stretch” research dollars at the same time staff reductions are occurring.To meet these challenges, we have used the correlative microscopy (CM) and client/server (C/S) computing to increase productivity while decreasing costs. Critical elements of our program are as follows:1) Establishing the Western Pennsylvania Genitourinary (GU) Tissue Bank which includes >100 prostates from patients with prostate adenocarcinoma as well as >20 normal prostates from transplant organ donors.


Author(s):  
Vinod K. Berry ◽  
Xiao Zhang

In recent years it became apparent that we needed to improve productivity and efficiency in the Microscopy Laboratories in GE Plastics. It was realized that digital image acquisition, archiving, processing, analysis, and transmission over a network would be the best way to achieve this goal. Also, the capabilities of quantitative image analysis, image transmission etc. available with this approach would help us to increase our efficiency. Although the advantages of digital image acquisition, processing, archiving, etc. have been described and are being practiced in many SEM, laboratories, they have not been generally applied in microscopy laboratories (TEM, Optical, SEM and others) and impact on increased productivity has not been yet exploited as well.In order to attain our objective we have acquired a SEMICAPS imaging workstation for each of the GE Plastic sites in the United States. We have integrated the workstation with the microscopes and their peripherals as shown in Figure 1.


2001 ◽  
Vol 15 (01) ◽  
pp. 53-87 ◽  
Author(s):  
Andrew Rehfeld

Every ten years, the United States “constructs” itself politically. On a decennial basis, U.S. Congressional districts are quite literally drawn, physically constructing political representation in the House of Representatives on the basis of where one lives. Why does the United States do it this way? What justifies domicile as the sole criteria of constituency construction? These are the questions raised in this article. Contrary to many contemporary understandings of representation at the founding, I argue that there were no principled reasons for using domicile as the method of organizing for political representation. Even in 1787, the Congressional district was expected to be far too large to map onto existing communities of interest. Instead, territory should be understood as forming a habit of mind for the founders, even while it was necessary to achieve other democratic aims of representative government.


Sign in / Sign up

Export Citation Format

Share Document