A Study on the Shrink wrap License of Digital Information Transactions - Focusing on the UCITA -

2010 ◽  
Vol 11 (2) ◽  
pp. 169-185
Author(s):  
한병완 ◽  
Seo Min-Kyo
Keyword(s):  
Author(s):  
K.-H. Herrmann ◽  
W. D. Rau ◽  
R. Sikeler

Quantitative recording of electron patterns and their rapid conversion into digital information is an outstanding goal which the photoplate fails to solve satisfactorily. For a long time, LLL-TV cameras have been used for EM adjustment but due to their inferior pixel number they were never a real alternative to the photoplate. This situation has changed with the availability of scientific grade slow-scan charged coupled devices (CCD) with pixel numbers exceeding 106, photometric accuracy and, by Peltier cooling, both excellent storage and noise figures previously inaccessible in image detection technology. Again the electron image is converted into a photon image fed to the CCD by some light optical transfer link. Subsequently, some technical solutions are discussed using the detection quantum efficiency (DQE), resolution, pixel number and exposure range as figures of merit.A key quantity is the number of electron-hole pairs released in the CCD sensor by a single primary electron (PE) which can be estimated from the energy deposit ΔE in the scintillator,


Author(s):  
Mark Meagher

Responsive architecture, a design field that has arisen in recent decades at the intersection of architecture and computer science, invokes a material response to digital information and implies the capacity of the building to respond dynamically to changing stimuli. The question I will address in the paper is whether it is possible for the responsive components of architecture to become a poetically expressive part of the building, and if so why this result has so rarely been achieved in contemporary and recent built work. The history of attitudes to- ward obsolescence in buildings is investigated as one explanation for the rarity of examples like the one considered here that successfully overcomes the rapid obsolescence of responsive components and makes these elements an integral part of the work of architecture. In conclusion I identify strategies for the design of responsive components as poetically expressive elements of architecture.


2018 ◽  
Vol 1 (2) ◽  
pp. 12
Author(s):  
Pedro Vitor de Sousa Guimarães ◽  
Sandro César Silveira Jucá ◽  
Renata Imaculada Soares Pereira ◽  
Ayrton Alexsander Monteiro Monteiro

This paper describes the use of a Linux embedded system for use in digital information and communication technology in order to generate image warnings using Internet of Things (IoT) prin- ciples. The proposed project generated a product, developed using concepts of project-based learning (ABP), called SECI (electronic internal communication system) that is accessed by students to view online warnings by distributed monitors and also by mobile devices connected to the Internet.


1998 ◽  
Vol 38 (10) ◽  
pp. 207-214 ◽  
Author(s):  
Sung Ryong Ha ◽  
Dhong Il Jung ◽  
Cho Hee Yoon

Runoff loads of pollutant in agricultural watersheds were spatially analyzed by using geographic information system(GIS) technology. The topological relationship between pollution sources in the watershed was, first of all, identified by using the developed digital map of land use and then the pollutant loads generated from each source was estimated by applying a conventional unit loading factor on the obtained digital information of pollution sources. To evaluate the loads delivered from spatially distributed pollution sources to monitoring stations in down stream via surface of watershed, a renovated empirical model incorporated with the information of pollutant discharge path was developed through introducing a digital terrain model(DTM) technique. In this model, the function of degradation of pollution loads during delivery process was simplified so that each watershed could have a basin-wide self-purification capacity which would be considered to be possessed inherently in each watershed and could retard the discharge of pollutants from sources generated to stream water. Model credibility showed good consistency with comparing the simulated values with observed data. Monte Carlo optimizing technique made it possible to estimate the basin-wide self-purification coefficients.


2019 ◽  
Vol 15 (01) ◽  
pp. 1-8
Author(s):  
Ashish C Patel ◽  
C G Joshi

Current data storage technologies cannot keep pace longer with exponentially growing amounts of data through the extensive use of social networking photos and media, etc. The "digital world” with 4.4 zettabytes in 2013 has predicted it to reach 44 zettabytes by 2020. From the past 30 years, scientists and researchers have been trying to develop a robust way of storing data on a medium which is dense and ever-lasting and found DNA as the most promising storage medium. Unlike existing storage devices, DNA requires no maintenance, except the need to store at a cool and dark place. DNA has a small size with high density; just 1 gram of dry DNA can store about 455 exabytes of data. DNA stores the informations using four bases, viz., A, T, G, and C, while CDs, hard disks and other devices stores the information using 0’s and 1’s on the spiral tracks. In the DNA based storage, after binarization of digital file into the binary codes, encoding and decoding are important steps in DNA based storage system. Once the digital file is encoded, the next step is to synthesize arbitrary single-strand DNA sequences and that can be stored in the deep freeze until use.When there is a need for information to be recovered, it can be done using DNA sequencing. New generation sequencing (NGS) capable of producing sequences with very high throughput at a much lower cost about less than 0.1 USD for one MB of data than the first sequencing technologies. Post-sequencing processing includes alignment of all reads using multiple sequence alignment (MSA) algorithms to obtain different consensus sequences. The consensus sequence is decoded as the reversal of the encoding process. Most prior DNA data storage efforts sequenced and decoded the entire amount of stored digital information with no random access, but nowadays it has become possible to extract selective files (e.g., retrieving only required image from a collection) from a DNA pool using PCR-based random access. Various scientists successfully stored up to 110 zettabytes data in one gram of DNA. In the future, with an efficient encoding, error corrections, cheaper DNA synthesis,and sequencing, DNA based storage will become a practical solution for storage of exponentially growing digital data.


Sign in / Sign up

Export Citation Format

Share Document