scholarly journals Advances in passive acoustic detection, localization, and tracking applied to unmanned underwater vehicles

2022 ◽  
Author(s):  
◽  
Kristen R. Kita

Detection, classification, localization, and tracking (DCLT) of unmanned underwater vehicles (UUVs) in the presence of shipping traffic is a critical task for passive acoustic harbor security systems. In general, vessels can be tracked by their unique acoustic signature due to machinery vibration and cavitation noise. However, cavitation noise of UUVs is considerably quieter than ships and boats, making detection significantly more challenging. In this thesis, I demonstrated that it is possible to passively track a UUV from its highfrequency motor noise using a stationary array in shallow-water experiments with passing boats. First, causes of high frequency tones were determined through direct measurements of two UUVs at a range of speeds. From this analysis, common and dominant features of noise were established: strong tones at the motor’s pulse-width modulated frequency and its harmonics. From the unique acoustic signature of the motor, I derived a high-precision, remote sensing method for estimating propeller rotation rate. In shallow-water UUV field experiments, I demonstrated that detecting a UUV from motor noise, in comparison to broadband noise from the vehicle, reduces false alarms from 45% to 8.4% for 90% true detections. Beamforming on the motor noise, in comparison to broadband noise, improved the bearing accuracy by a factor of 3.2×. Because the signal is also high-frequency, the Doppler effect on motor noise is observable and I demonstrate that range rate can be measured. Furthermore, measuring motor noise was a superior method to the “detection of envelope modulation on noise” algorithm for estimating the propeller rotation rate. Extrapolating multiple measurements from the motor signature is significant because Bearing-Doppler-RPM measurements outperform traditional bearing-Doppler target motion analysis. In the unscented Kalman filter implementation, the tracking solution accuracy for bearing, bearing rate, range, and range rate improved by a factor 2.2×, 15.8×, 3.1×, and 6.2× respectively. These findings are significant for improving UUV localization and tracking, and for informing the next-generation of quiet UUV propulsion systems.

2019 ◽  
Vol 27 (1) ◽  
pp. 332-345 ◽  
Author(s):  
Charita Darshana Makavita ◽  
Shantha Gamini Jayasinghe ◽  
Hung Duc Nguyen ◽  
Dev Ranmuthugala

Author(s):  
Robert M. Koch

Abstract The present work describes an integrated, two-phase computer-based method for fabricating marine propulsors using stereolithography. This new methodology seamlessly integrates stereolithography rapid prototyping techniques with the hydrodynamic design, structural design, and prototype testing of advanced marine propulsors in order to greatly increase the design process efficiency and reduce development time. Its use as applied to the design, fabrication, and testing of advanced propulsor prototypes for small weapon’s-scale undersea vehicles (e.g., Unmanned Underwater Vehicles (UUVs), lightweight and heavyweight torpedoes, etc.) is described in order to demonstrate specific strengths of the new method.


Author(s):  
Matthias Golz ◽  
Florin Boeck ◽  
Sebastian Ritz ◽  
Gerd Holbach

The efforts to discover the world’s oceans — even in extremely deep-sea environments — have grown more and more in the past years. In this context, unmanned underwater vehicles play a central role. Underwater systems that are not tethered need to provide an apparatus to ensure a safe return to the surface. Therefore, positive buoyancy is required and can be achieved by either losing weight or expanding volume. A conservative method is the dropping of ballast weight. However, nowadays this method is not appropriate due to the environmental impact. This paper presents a ballast system for an automated ascent of a deep-sea seabed station in up to 6000 m depth. The ballast system uses a DC motor driven modified hydraulic pump and a compressed air auxiliary system inside a pressure vessel. With regard to the environmental contamination in case of a leakage, only water is used as ballast fluid. The modification of an ordinary oil-hydraulic radial piston pump and the set-up of the ballast system is introduced. Results from sea trials in the Atlantic Ocean are presented to verify the functionality of the ballast system.


Sign in / Sign up

Export Citation Format

Share Document