scholarly journals Clinical, Radiographic and Histological Evaluation of Primary Teeth Pulpotomy Using MTA And Ferric Sulfate

2018 ◽  
Vol 29 (2) ◽  
pp. 159-165 ◽  
Author(s):  
Marina Azevedo Junqueira ◽  
Nayara Nery Oliveira Cunha ◽  
Fernanda Ferreira Caixeta ◽  
Nádia Carolina Teixeira Marques ◽  
Thais Marchini Oliveira ◽  
...  
Keyword(s):  
Primary Teeth ◽  
Clinical Success ◽  
Mineral Trioxide Aggregate ◽  
Ferric Sulfate ◽  
Histological Evaluation ◽  
Primary Molars ◽  
Suitable Alternative ◽  
First Choice ◽  
Radiographic Data

Abstract The aim of this study was to evaluate the clinical, radiographic and histological outcomes of the dentin-pulp complex from primary molars after pulpotomy with mineral trioxide aggregate (MTA) and 15.5% ferric sulfate (FS). Thirty-one primary molars were randomly allocated into MTA or FS groups. Clinical and radiographic evaluations were recorded at 3-, 6-, 12- and 18-month follow-up. Teeth at the regular exfoliation period were extracted and processed for histological analysis. Clinical and radiographic data were tested by statistical analysis (p≤0.01). Histological outcomes were analyzed descriptively. All of the treated teeth presented clinical success over the experimental periods. Both groups exhibited 100% of radiographic success at 3, 6 and 12 months. At the 18-month follow-up, one tooth from FS group presented inter-radicular radiolucency (p>0.01). Histologically, the treated teeth presented pulp vitality and absence of inflammatory infiltrate into the connective tissue. Only MTA group showed hard tissue barrier surrounded by odontoblasts over the pulp stumps. Both MTA and 15.5% FS are effective for pulpotomies of primary teeth. Although MTA is considered the first-choice material, FS may be a suitable alternative when treatment cost is an issue.

Comparative Evaluation of Formocresol and Mineral Trioxide Aggregate in Pulpotomized Primary Molars - 2 Year Follow Up

2012 ◽  
Vol 37 (2) ◽  
pp. 143-147 ◽  
Author(s):  
P Airen ◽  
A Shigli ◽  
B Airen
Keyword(s):  
Comparative Evaluation ◽  
Primary Teeth ◽  
Clinical Success ◽  
Mineral Trioxide Aggregate ◽  
Clinical Success Rate ◽  
Primary Molars ◽  
Second Primary ◽  
Pulp Chamber ◽  
Aggre Gate

Aim: The aim of the present study was to clinically and radiographically evaluate Mineral Trioxide Aggre-gate (MTA) as an agent for pulpotomy in primary teeth and to compare it with that of Formocresol (FC) pulpotomy. Method: Seventy first and second primary mandibular molars of children were chosen on patients who required minimum two pulpotomies in either arch or same arch. After the standardized technique of Pulpotomy with MTA and Formocresol, all molars were treated with a thick mix of Zinc oxide Eugenol cement into the coronal pulp chamber followed by preformed stainless steel crown. The children were followed up for clinical and radio graphical examination after 6,12 and 24 month for Pain, Swelling, Sinus/ fistula, Periapical changes, Furcation radiolucency and internal resorption. Results: MTA represents 97% clinical success rate in comparison to Formocresol with 85% success. Radiographically also MTA showed more promising results with 88.6% success in comparison to Formocresol with 54.3%. Conclusions: Thus, MTA pulpotomy has emerged as an easier line of treatment to save the premature loss of primary teeth due to caries or trauma.

scholarly journals Evaluation of formocresol, calcium hydroxide, ferric sulfate, and MTA primary molar pulpotomies

2014 ◽  
Vol 08 (02) ◽  
pp. 234-240 ◽  
Author(s):  
Esma Yildiz ◽  
Gul Tosun
Keyword(s):  
Calcium Hydroxide ◽  
Clinical Symptoms ◽  
Clinical Success ◽  
Mineral Trioxide Aggregate ◽  
Ferric Sulfate ◽  
Primary Molars ◽  
Success Rates ◽  
Chi Square ◽  
Primary Molar

ABSTRACT Objective: The aim of this study is to evaluate four different pulpotomy medicaments in primary molars. Materials and Methods: A total of 147 primary molars with deep caries were treated with four different pulpotomy medicaments (FC: formocresol, FS: ferric sulfate, CH: calcium hydroxide, and MTA: mineral trioxide aggregate) in this study. The criteria for tooth selection for inclusion were no clinical and radiographic evidence of pulp pathology. During 30 months of follow-up at 6-month intervals, clinical and radiographic success and failures were recorded. The differences between the groups were statistically analyzed using the Chi-square test and Kaplan-Meier analysis. Results: At 30 months, clinical success rates were 100%, 95.2%, 96.4%, and 85% in the FC, FS, MTA, and CH groups, respectively. In radiographic analysis, the MTA group had the highest (96.4%), and the CH group had the lowest success rate (85%). There were no clinical and radiographic differences between materials (P > 0.05). Conclusions: Although there were no differences between materials, only in the CH group did three teeth require extraction due to further clinical symptoms of radiographic failures during the 30-month follow-up period. None of the failed teeth in the other groups required extraction during the 30-month follow-up period.

Ferric sulfate as pulpotomy agent in primary teeth: twenty month clinical follow-up

2000 ◽  
Vol 24 (4) ◽  
pp. 269-272 ◽  
Author(s):  
Hamijeta Ibricevic ◽  
Qumasha Al-Jame
Keyword(s):  
Success Rate ◽  
Primary Teeth ◽  
Root Resorption ◽  
Clinical Success ◽  
Clinical Success Rate ◽  
Ferric Sulfate ◽  
Primary Molar ◽  
Molar Teeth ◽  
The Moment

Seventy primary molar teeth, carious exposed, symptom free, without any sign of root resorption in children aged from 3 to 6 years (main age 4.3yr) were treated with conventional pulpotomy procedures. Ferric sulfate 15.5% solution (applied for 15 second for 35 teeth) and formocresol solution (five minute procedure of Buckley's formula for next 35 teeth) have been used as pulpotomy agents. In both groups, pulp stumps were covered with zinc-oxide eugenol paste. Permanent restorations were stainless steel crowns. Clinical check up was every three-months and radiographic follow-up time was six and twenty months after treatment. Our results within this period revealed 100% clinical success rate in both groups. Radiographic success rate was in both groups 97.2%, while in 2.8% cases has shown internal root resorption. On the basis of these results, we can recommend ferric sulfate as a pulpotomy agent in primary teeth in substitution for formocresol at the moment.

scholarly journals Success Rates of Ankaferd Blood Stopper and Ferric Sulfate as Pulpotomy Agents in Primary Molars

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Kenan Cantekin ◽  
Hüsniye Gümüş
Keyword(s):  
Primary Teeth ◽  
Clinical Success ◽  
Ferric Sulfate ◽  
Hemostatic Agent ◽  
Radiographic Evaluation ◽  
Primary Molars ◽  
Success Rates ◽  
Radiographic Findings ◽  
Ankaferd Blood Stopper

Purpose. The purpose of this study was to evaluate clinical and radiographic findings of treatments using a new hemostatic agent (Ankaferd blood stopper (ABS)), as compared to ferric sulfate (FS), when used as a pulpotomy medicament in primary teeth. Materials and Methods. The primary molars (70) were selected from 35 children aged 4 to 6 years. The teeth were randomized into two groups for pulpotomy with the ABS (n=35) and the FS (n=35) agents. The patients were recalled for clinical and radiographic evaluation at 3-, 6-, 9-, and 12-month intervals. Results. At the 3- and 6-month clinical and radiographic evaluations, total success rates of 100% were observed in each group. In ABS and FS groups, the clinical success rates, however, reduced to 90.9% and 93.9% at the 9-month examination and 84,8% and 90.9% at the 12-month examination, respectively. Similarly, the teeth in the ABS and FS groups had radiographic success rates of 90.9% and 93.9% at 9 months and 84.8% and 87.8% at 12 moths, respectively. Conclusion. Although the findings indicated that ABS agents may be useful agents for pulpotomy medicament, further long-term and comprehensive histological investigations of ABS treatments are necessary.

MTA and Ferric Sulfate in Pulpotomy Outcomes of Primary Molars: A Systematic Review and Meta-Analysis

2014 ◽  
Vol 39 (1) ◽  
pp. 1-8 ◽  
Author(s):  
S Asgary ◽  
A Shirvani ◽  
M Fazlyab
Keyword(s):  
Systematic Review ◽  
Randomized Clinical Trials ◽  
Meta Analysis ◽  
Mineral Trioxide Aggregate ◽  
Ferric Sulfate ◽  
Primary Molars ◽  
Eligibility Criteria ◽  
Primary Molar ◽  
Long Term Treatment

Objective: Methods of systematic review and meta analysis were employed to compare the success rate of pulpotomy of primary molars using mineral trioxide aggregate (MTA) and ferric sulfate (FS) as two regenerative and preservative agents, respectively. Study design: After raising a PICO question (In pulpotomy of vital carious-exposed primary molars, how does MTA compare to FS in terms of clinical and radiographic outcomes?) and determining the search strategy, MeSH-matching keywords were searched in four electronic databases and retrieved papers were examined in titles, and if necessary abstracts and full texts, to be relevant. Randomized clinical trials (RCTs) evaluating pulpotomy of vital primary molars after carious/traumatic exposure conducted with either FS or MTA, with at least a 6-month recall, tooth restorability, and those considering clinical and radiographic signs/symptoms, were included. The nonrandomized allocation and absence of comparison between the treatment groups caused the exclusion of the article. The quality of the RCTs and also their risk of bias (low, moderate, high), were assessed using a modification of van Tulder list; for meta-analysis of the matching studies, the extracted data were analyzed by Mantel Hanszel analysis. Results: A total number of 620 articles were found. After exclusion of the common titles and application of the eligibility criteria, 4 RCTs [12-month follow-up: n=3, 24-month follow-up: n=4, in total: 264 teeth) comparing MTA and FS, were selected. It was showed that the 12-month outcome of both materials were similar [RR= 0.642 (CI 95%: 0.225-1.833, P=0.407)], while the two-year follow-up results revealed significant differences in treatment outcome, in favor of MTA [RR was 0.300 (CI 95%: 0.132-0.683, P=0.004)]. Conclusion: MTA demonstrated superior long-term treatment outcomes in pulpotomy of primary molars than FS. Clinical Significance: Considering the advantages of MTA compared to FS and its better clinical results, use of this bioregenerative material in primary molar pulpotomy is recommended.

scholarly journals Comparison of Mineral Trioxide Aggregate and Calcium Hydroxide as pulpotomy agents in Primary Molars

2014 ◽  
Vol 3 (1) ◽  
pp. 24-31
Author(s):  
Md Farid Uddin ◽  
Md Shamsul Alam ◽  
Ali Asgor Moral ◽  
Md Mujibur Rahman Howlader ◽  
Md Ismail Hossain
Keyword(s):  
Calcium Hydroxide ◽  
Traumatic Injury ◽  
Glass Ionomer Cement ◽  
Radiographic Finding ◽  
Mineral Trioxide Aggregate ◽  
Evaluation Study ◽  
Primary Molars ◽  
Suitable Alternative ◽  
Group 2

Background: The greatest threats to developing teeth are dental caries and traumatic injury. If pulpal exposure occurs, then a pulpotomy procedure aims to preserve pulp vitality to allow for normal root development. Historically, calcium hydroxide has been the material of choice for pulpotomy procedures. Recently, an alternative material called mineral trioxide aggregate (MTA) has demonstrated the ability to induce hard-tissue formation in pulpal tissue. Objectives: This prospective study was conducted to observe the clinical and radiological findings of pulpotomies done with Mineral Trioxide Aggregate (MTA) &Calcium Hydroxide{Ca(OH)2} and to evaluate success rate of MTA in maintaining pulpal health in teeth with carious lesion. Materials and Methods: In this clinical trial study, 40 primary molars were treated by a conventional pulpotomy technique. They all fulfill the inclusion criteria and gave consent regarding this study. All selected teeth were evenly divided into 2 test groups. In group 1, the MTA pulpotomy (experimental) was performed, whereas in group 2, the conventional Ca(OH)2 pulpotomy (control) was done. The teeth of both groups were finally restored by Glass Ionomer Cement (GIC). The children were recalled for clinical and radiographic evaluations after 3, 6, and 12 months. Result: The follow-up evaluations revealed failure due to pain and swelling detected at 6 and 12 months postoperative evaluations in only 3 teeth treated with Ca(OH)2 and one treated with MTA. The remaining 36 teeth appeared to be clinically and radiographically successful 12 months postoperatively. Calcific metamorphosis was a radiographic finding in 4 teeth treated with MTA and 2 teeth treated with Ca(OH)2. Conclusion: Based on this clinical and radiographical evaluation study of 3, 6, and 12 months follow-up, MTA could be used as a safe material for pulpotomy in cariously and mechanically exposed primary molars and seems to be a suitable alternative to calcium hydroxide. Further research, however, is required to clarify this conclusion. DOI: http://dx.doi.org/10.3329/updcj.v3i1.17981 Update Dent. Coll. j: 2013; 3 (1): 24-31

Mineral Trioxide Aggregate as Pulp Capping Agent for Primary Teeth Pulpotomy: 2 Year Follow Up Study

2009 ◽  
Vol 33 (4) ◽  
pp. 311-314 ◽  
Author(s):  
Priya Subramaniam ◽  
Sapna Konde ◽  
Somy Mathew ◽  
Sony Sugnani
Keyword(s):  
Primary Teeth ◽  
Mineral Trioxide Aggregate ◽  
Primary Molars ◽  
Capping Agent ◽  
Mechanical Pulp ◽  
Pulp Capping ◽  
Follow Up Study ◽  
Pulp Exposure ◽  
Percent Success

The aim of the present study was to clinically and radiographically evaluate Mineral Trioxide Aggregate(MTA) as an agent for pulpotomy in primary teeth and to compare it with that of formocresol (FC) pulpotomy. Nineteen children between the ages of 6 to 8 years with 40 carious primary molars were treated with pulpotomy using either FC or MTA. All the molars were evaluated clinically and radiographically at regular intervals over a twenty four month period. The observations were tabulated and statistically analyzed. Eighty five percent success was observed with FC pulpotomy whereas MTA showed 95% success. MTA showed a higher clinical and radiographic success rate than FC. MTA may be a favorable material for pulpotomy in primary teeth whose pulps have been compromised by a carious or mechanical pulp exposure.

scholarly journals Comparative Evaluation of the Success Rate of Pulpotomy in Primary Molars Using Ferric Sulphate (FS) and Mineral Trioxide Aggregate (MTA): A Clinical and Radiographic Study

2021 ◽  
pp. 356-363
Author(s):  
Yogesh Somwanshi ◽  
Pankaj Chavhan ◽  
Arun Sajjanar ◽  
Snehal Ughade ◽  
Nutan Gutte ◽  
...  
Keyword(s):  
Success Rate ◽  
Clinical Success ◽  
Mineral Trioxide Aggregate ◽  
Clinical Success Rate ◽  
Primary Molars ◽  
Ferric Sulphate ◽  
Primary Molar ◽  
Group A ◽  
Group B

Purpose: The aim of this present study was to observe clinical, radiographic response of pulp to Ferric Sulphate and Mineral Trioxide Aggregate when used as pulpotomy agent in primary molars. Materials and Methods: Sixty restorable primary molars were selected for the study. The children were chosen who require minimum two pulpotomies in either arch preferably each on the opposite side (i.e. right and left). Primary molars on the right side of the patient were assigned to Ferric Sulphate (FS) (Group A) and left side was assigned for the Mineral Trioxide Aggregate (MTA) (Group B). Statistical analysis was done for pain, swelling, sinus, and fistula and for internal resorption, furcation radiolucency and periapical pathology using the chi-square test. Results: outcome of the present study was observed at 3 month interval and after 6 months. The clinical success rate for MTA (AQUA) and ferric sulphate during 3 and 6 month follow up was 100%. The radiographic follow up of MTA was 100% during 3 and 6 month, whereas it was 96.6% for 3 and 6 month follow up with respect to ferric sulphate. There were no significant differences in the clinical (p>0.1) and radiographic (p>0.98) success rates among both the groups. Conclusion: ferric sulphate was found to be equally effective when compared with MTA. Radiographic success rate was lower for Ferric sulphate (Group A) than that of MTA (Group B) with occurrence of one internal resorption seen with first primary molar.

Zinc Oxide–Eugenol Pulpotomy in Primary Teeth: A 24-Month Follow-up

2016 ◽  
Vol 40 (2) ◽  
pp. 107-112 ◽  
Author(s):  
Adriana Gonzalez-Lara ◽  
M Socorro Ruiz-Rodriguez ◽  
Mauricio Pierdant-Perez ◽  
J Arturo Garrocho-Rangel ◽  
Amaury J Pozos-Guillen
Keyword(s):  
Zinc Oxide ◽  
Primary Teeth ◽  
Saline Solution ◽  
Primary Molars ◽  
Minimal Amount ◽  
Capping Agent ◽  
Pulp Capping ◽  
Histopathologic Study ◽  
Zinc Oxide Eugenol

Objective: The purpose of the present study was to evaluate the clinical and radiographic effectiveness of zinc oxide–eugenol (ZOE) as the only pulp capping agent in pulpotomies carried out on decayed primary molars after a follow-up period of 24 months. Study design: In total, 60 pulpotomies were performed on 38 patients aged 3 to 11 years. Pulpotomy treatment consisted of the removal of the coronal pup tissue, subsequent hemostasis, irrigation with saline solution, drying and pressure with sterile cotton pellets, and placement of a thick regular ZOE base with a minimal amount of eugenol directly over the vital radicular pulp. Additionally, a histopathologic study was carried out on some of the molars treated. Results: After a 24-month follow-up, we considered 51 procedures to be successful and 9 failures using clinical and radiographic criteria; most of the failures occurred between the 12th and 18th month. Conclusions: Results suggest that the proposed pulpotomy treatment with ZOE as the only capping agent may be considered as an alternative technique in the pulp treatment of primary molars.

scholarly journals Revascularization versus apical barrier technique with mineral trioxide aggregate plug: A systematic review

2018 ◽  
Vol 32 (1) ◽  
pp. 9-16 ◽  
Author(s):  
Luiz Alexandre Chisini ◽  
Guillermo Grazioli ◽  
Alejandro Francia ◽  
Alissa Schmidt San Martin ◽  
Flavio Fernando Demarco ◽  
...  
Keyword(s):  
Clinical Success ◽  
Mineral Trioxide Aggregate ◽  
Clinical Success Rate ◽  
Permanent Teeth ◽  
Radiographic Outcomes ◽  
Bias Risk ◽  
Radiographic Measurements ◽  
High Bias ◽  
The Mean

Aim: To compare the clinical and radiographic outcomes observed in Necrotic Immature Permanent Teeth (NIPT) after revascularization or apexification with MTA-apical plug. Methodology: PubMed/MEDLINE, Web of science and Scopus were the databases used, up to July 30th, 2017, for article research. Independent reviewers read the titles and abstracts of all reports that met inclusion/exclusion criteria: prospective or retrospective clinical studies comparing the revascularization of root canal and apexification. Clinical success of therapies, deposition and thickening of lateral dentinal walls (root width) and the continuation of root development (root length) were investigated. Bias risk of included studies was assessed using the Cochrane risk of bias. Results: From 1642 records, five papers fulfilled all inclusion criteria. Overall, 91 teeth were submitted to revascularization and 64 teeth to apexification with MTA. The mean follow-up was 23.2 months in revascularization and 21.8 in apexification. Clinical success rate was of 87.9% in the revascularization group and 90.6% in the apexification group. An increase on lateral dentinal walls thickening was observed in most revascularization cases (13%) while MTA as apical plug suggest a mild resorption of the root (1.3%). High bias risk was observed on included studies. Conclusions: Apexification with MTA-apical plug provides similar clinical success to revascularization. However, radiographic measurements showed an improvement in thickening of lateral dentinal walls in most of the revascularization cases in addition to a higher dental development. However, these results should be interpreted with caution.

Sign in / Sign up

Export Citation Format

Share Document