scholarly journals Yield and quality of the Tetsukabuto squash fruits induced with 2,4-D doses under dry conditions

2017 ◽  
Vol 35 (2) ◽  
pp. 271-277
Author(s):  
Roberto CF Queiroga ◽  
Gabriel D Silva ◽  
Auderlan M Pereira ◽  
Ricardo RP Almeida ◽  
Ariano B Silva
Keyword(s):  
Fruit Set ◽  
Fruit Production ◽  
Climatic Conditions ◽  
Soluble Solids ◽  
Plant Production ◽  
Control Treatment ◽  
Yield And Quality ◽  
Dry Conditions ◽  
Fruit Mass

ABSTRACT Squashes and pumpkins are known and grown worldwide, including the Tetsukabuto type, a hybrid of Japanese origin. On this work, we evaluated yield and quality of parthenocarpic fruits of hybrid Tetsukabuto developed with the use of 2,4-D doses, in the climatic conditions of the Brazilian semiarid, in the city of Pombal, state of Paraíba, Brazil. The experiment was carried out from February to May 2013, in complete blocks at random and five replications. Treatments corresponded to five 2,4-D doses (0, 90, 180, 270, and 360 mg/L) applied to female flowers, and a control treatment, where fruits developed out of insect pollinated flowers. We evaluated number of flowers per plant, duration of flowering, number of fruits per plant (used to estimate number of fruits per hectare), fruit set index, fruit mass and transversal and longitudinal diameters, pulp thickness and content of soluble solids, total fruit production and yield. Number of fruits per plant and fruit mass increased 269.5 and 15.4%, respectively, with 212.1 mg/L and 360.0 mg/L of 2,4-D, when compared to the control treatment. Increasing the 2,4-D dose from 0.0 to 241.4 mg/L resulted in 38.2% rise in plant production. Correlations were significant only for number of flowers x number of fruits per plant (NF) and NF x yield, with coefficients of 87.5 and 82.7%, respectively. These results indicate that fruit induction using 2,4-D resulted in higher fruit set, independent of the 2,4-D dose applied.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

scholarly journals EFFECTS OF CHEMICAL THINNING WITH ARMOTHIN® ON FRUIT SET, YIELD AND QUALITY OF JAPANESE PLUM (Prunus salicina Lindl.) CV. ‘FORTUNE’

2019 ◽  
Vol 18 (3) ◽  
Author(s):  
Eduardo Von Bennewitz ◽  
Andrés Cabalín ◽  
Tomáš Lošák
Keyword(s):  
Fruit Set ◽  
Fruit Size ◽  
Soluble Solids ◽  
Control Treatment ◽  
Crop Load ◽  
Japanese Plum ◽  
Prunus Salicina ◽  
Yield And Quality ◽  
General Chemical

The effects of the application of the chemical thinner Armothin® on fruit set, yield and quality of Japanese plum (Prunus salicina Lindl.) cv. ‘Fortune’ were studied during two seasons in Central Chile (34.56°S, 71.5°W). Trees were sprayed with Armothin® at 0.5%, 1% and 2% concentrations. All thinning treatments reduced the fruit set and fruitlet number (fruitlets/50 cm of branch). Armothin® at 2% conc. was the most aggressive treatment, drastically reducing the fruit set from 85.9% and 82.9% of the control and crop load to unprofitable levels during both seasons. Chemical thinning treatments at the two lowest concentrations (0.5 and 1%) did not significantly alter the crop load compared with the unsprayed control during both study seasons. Thinning costs were reduced (Armothin® 0.5%, 25.0% and 21.5% of the control treatment and Armothin® 1%, 24.6% and 24.1% of the control, during the first and second season, respectively). In general, chemical thinning increased the fruit size and total soluble solids content (TSS). Taking into account the ef- fects on thinning, crop load, fruit quality and thinning costs, Armothin® 1% and Armothin® 0.5% are the most advantageous treatments in the case of this study.

scholarly journals Phenology, production and quality of blueberry produced in humid subtropical climate

2018 ◽  
Vol 40 (3) ◽  
Author(s):  
José Gilberto Sousa Medeiros ◽  
Luiz Antonio Biasi ◽  
Claudine Maria de Bona ◽  
Francine Lorena Cuquel
Keyword(s):  
Fruit Set ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Subtropical Climate ◽  
Blue Color ◽  
Productive Performance ◽  
Climate Conditions ◽  
Mass Size ◽  
Fruit Mass

Abstract Studies on adaptation to the cultivation site are necessary for the recommendation of new cultivars. The aim of this study was to evaluate the phenological development, productivity and fruit quality of eight blueberry cultivars from the rabbiteye group (Aliceblue, Bluebelle, Bluegem, Briteblue, Climax, Delite, Powderblue and Woodard) and two from the highbush group (Georgiagem and O’Neal) under humid subtropical conditions in the 2012/2013, 2013/2014 and 2014/2015 cycles. Beginning and end of flowering, beginning and end of harvesting, fruit set, production, mass, diameter, pH, content of soluble solids, titratable acidity, ratio and coloring were evaluated. The evaluated cultivars presented flowering in the period from July to September, concentrating harvest in the months of November and December. The highest fruit set was observed in Delite, Climax, Briteblue and Powderblue cultivars. There were differences among cultivars regarding fruit mass, size, pH, content of soluble solids and acidity. The results showed that the cultivars exhibited blue color with few variations over the evaluation years. Cultivars with the best productive performance under humid subtropical climate conditions are Bluegem, Delite, Climax and Powderblue.

scholarly journals Yield and quality of strawberry cultivars

2010 ◽  
Vol 28 (2) ◽  
pp. 222-226 ◽  
Author(s):  
Luis Eduardo C Antunes ◽  
Nara Cristina Ristow ◽  
Ana Cristina R Krolow ◽  
Sílvia Carpenedo ◽  
Carlos Reisser Júnior
Keyword(s):  
Statistical Design ◽  
Rio Grande ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Climatic Conditions ◽  
Soluble Solids ◽  
Experimental Unit ◽  
Rio Grande Do Sul ◽  
Yield And Quality

The strawberry cultivation is an important economic activity in the Rio Grande do Sul State, Brazil, however the number of offered cultivars to the growers is reduced. The yield and quality of strawberry (Fragaria x ananassa Duch.) cultivars Camarosa, Galexia, Earlibrite, Festival, Plarionfre and Sabrosa was evaluated under the climatic conditions of Pelotas, Rio Grande do Sul State. We determined the number, mass, total soluble solids (TSS ºBrix), total titratable acidity (TTA), antocianin level and fresh fruits produced in an experimental unit. We also determined the production of fruits per hectare and per plant. The statistical design used in the experiment was of completely randomized blocks with 6 treatments (cultivars) and 4 replicates where the experimental unit was composed of 8 plants. The harvest began in the first half of August, extending to the second half of December, totalling 20 weeks. Plarionfre, Earlibrite and Festival cultivars showed higher production from the first half of October until the end of the first half of November. Camarosa reached higher productivity, mass of plants and fruit weight. There were no differences between the evaluated cultivars in the levels of TSS, antocianin, ATT and pH during the period of evaluation.

Fruit set, development and maturation.

2021 ◽  
pp. 203-213
Author(s):  
Rosemary J. du Preez
Keyword(s):  
Fruit Quality ◽  
Management Practices ◽  
Fruit Set ◽  
Soluble Solids ◽  
Chemical Application ◽  
Guava Fruit ◽  
Yield And Quality ◽  
Phenological Cycle ◽  
Productivity Gains

Abstract This chapter describes the guava fruit as well as the fruit set, growth, drop, harvesting, yield and quality (total soluble solids, total acids and ascorbic acid). Understanding the phenological cycle of guava and the effect of management practices on yield and fruit quality allows management practices to be modified to develop strategies which should lead to productivity gains for different pruning or chemical application times. As the effects of various treatments and times of application on yield and fruit quality for different cultivars and climatic zones are known, it is possible to decide on the optimum time to apply treatments knowing what the quality of the fruit will be, the time that the fruit will be harvested, expected yield and the critical times to apply management practices.

scholarly journals HONEY BEE CONTRIBUTION TO ‘BORDÔ’ GRAPEVINE FRUIT PRODUCTION IN SOUTHERN BRAZIL

2017 ◽  
Vol 39 (3) ◽  
Author(s):  
MIRELI MARTIGNAGO ◽  
RAFAEL MARTINS ◽  
BIRGIT HARTER-MARQUES
Keyword(s):  
Apis Mellifera ◽  
Fruit Production ◽  
Quality Parameters ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Yield And Quality ◽  
Pollinating Insects ◽  
Important Quality ◽  
Commercially Important

ABSTRACT The production of fruits and seeds of many crops is increased when bees visit their flowers pollinating them. The aim of this study was to evaluate the effect of different pollination treatments on ‘Bordô’ grapevine (Vitis labrusca L.) fruit quantity and quality. Quantitative and qualitative fruit production parameters of plants visited by Apis mellifera L., manually self- and cross-pollinated plants and plants without pollination were analyzed and compared. Fruit production was high for all treatments and all fruits presented four seeds per fruit, on average, confirming that this grape cultivar is autogamous. However, fruit set after spontaneous self-pollination was statistically lower than that of all other treatments, and pollination by A. mellifera showed the highest fruit production. Furthermore, pollination by honey bees resulted in increased biomass, reflected on fruit weight, but the content of soluble solids remained unchanged. The results of this study showed that there is no need of pollinators for fruit production of ‘Bordô’ cv., but the presence of these agents, in particular Apis mellifera, influences commercially important quality parameters such as fruit yield and fresh weight. Therefore, the use of bee hives in areas with deficit of pollinating insects may promote an improvement in yield and quality of this cultivar.

scholarly journals Impact of Grafting on Watermelon Growth, Fruit Yield and Quality

2012 ◽  
Vol 76 (1) ◽  
pp. 99-118 ◽  
Author(s):  
Fouad Mohamed ◽  
Khalid El-Hamed ◽  
Mohammed Elwan ◽  
Mennat-Allah Hussien
Keyword(s):  
Crop Production ◽  
Citrullus Lanatus ◽  
Abiotic Stress Tolerance ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Crop Damage ◽  
Control Treatment ◽  
Yield And Quality ◽  
Male Flowers

Impact of Grafting on Watermelon Growth, Fruit Yield and QualityGrafting is an alternative approach to reduce crop damage resulting from soil-borne pathogens and increases plant abiotic stress tolerance, which in turn increases crop production. The purpose of this study was to determine whether grafting could improve plant growth and fruit quality of watermelon through monitoring the changes induced by different rootstock-scion combinations. Watermelon (Citrullus lanatus) cv. Aswan F1was grafted into five rootstocks (Nun 6001 F1, Strongtosa F1, Tetsukabuto F1, Ferro F1and Shintoza F1) hybrids betweenCucurbita maximaandCucurbita moschata.Highest vegetative growth and fruit yield were obtained by ‘Nun 6001 F1’ as a rootstock using the tongue approach method. Grafting reduced significantly sex ratio by reducing the number of male flowers. Grafting increased significantly lycopene content in fruit flesh by 57% over the control treatment, but did not affect soluble solids content (SSC). One third of the control non-grafted plants died andFusarium oxysporumwas isolated as the responsible pathogen. These results indicate that grafting watermelon onto specific rootstock influences growth, productivity, and quality of the fruit as well as disease resistance. Grafting can be suggested as an alternative method to control ofFusariumwilt in watermelon production.

scholarly journals Industrial Processing Affects Product Yield and Quality of Diced Tomato

Agriculture ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 230
Author(s):  
Francesco De Sio ◽  
Mariateresa Rapacciuolo ◽  
Alessandro De Giorgi ◽  
Luca Sandei ◽  
Bonaventura Giuliano ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Product Yield ◽  
Fruit Production ◽  
Soluble Solids ◽  
Total Polyphenols ◽  
Quality Performance ◽  
Industrial Processing ◽  
Yield And Quality ◽  
Promising Perspective

The tomato industry has been searching for new genotypes with improved fruit production, both in the field and industrially processed, together with high-quality performance under sustainable management conditions. This research was carried out in Southern Italy with the aim of assessing the effects of industrial processing on the yield and quality of four tomato hybrids grown according to organic farming methods and addressed at dicing. MAX 14111 and HMX 4228 showed the highest values of field and processing yield as well as reduced sugars and fructose. MAX 14111 had the highest values of total solids and soluble solids, titratable acidity, fiber, energetic value, polyphenols, and also rutin, though not significantly different from Impact. HMX 4228 performed best in terms of sugar ratio, color and naringenin. Concerning the diced products, the sensorial qualities of the four hybrids differed significantly. Total polyphenols, naringenin and rutin in the tomato fruits were higher in the processed than in the raw product. The appreciable fruit yield and quality resulting from both field and processing phase represent a promising perspective for identifying improved tomato genotypes addressed at dicing.

scholarly journals Effect of Spraying Zinc, Copper And Iron on Leaf Nutrient, Fruit Set And Some Fruit Quality of Pistachio Trees (pistacia Vera L.) Cv. Halebi

2020 ◽  
Vol 23 (2) ◽  
pp. 218-227
Author(s):  
Zulaikha Ramadhan Ibrahim
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Foliar Application ◽  
Control Treatment ◽  
Pistacia Vera ◽  
Kurdistan Region ◽  
Yield And Quality ◽  
Percentage Yield ◽  
Pistachio Trees

This study was conducted at a private orchard in the Ekmale village of Duhok Governorate, Kurdistan Region, Iraq during growing season (2020) to evaluate the effect of foliar sprays of three concentrations of zinc (0, 750, and 1500 mg.L−1 ), three concentrations of copper (0, 100, and 200 mg.L−1 ) and three concentrations of iron (0, 150, and 300 mg.L−1 ) on leaf nutrient, fruit set, as well as yield and quality of 18- years old " Halebi " pistachio trees. The nutrition solutions were sprayed on trees at two times (bud swell stage and green tip stage). Based on the obtained results, fruit set percentage, yield, and leaf nutrient were significantly affected by foliar application of a zinc, copper and iron each alone. In combination, the triple interactions among 1500mg.L−1 zinc plus 200mg.L−1 copper and 300mg.L−1 iron was the most affected one which exceed significantly on the control treatment, Moreover, nutrient treatment had a significant effect on the percentage of blankness. In general, these results show that Zn, Cu and Fe fertilizers is necessary for obtaining better yield and fruit quality in " Halebi " pistachio trees.

scholarly journals 186 INFLUENCE OF HYDROGEN CYANAMIDE AND WILTH IN ON BLOSSOM THINNING OF APPLE AND PLUM

HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 455f-455
Author(s):  
Esmaeil Fallahi ◽  
Brenda R. Simons ◽  
Max W. Williams
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Fruit Size ◽  
Soluble Solids ◽  
Full Bloom ◽  
Mature Trees ◽  
Hydrogen Cyanamide ◽  
Fruit Thinning ◽  
Yield And Quality

Effects of hydrogen cyanamide and Wilthin on blossom thinning and the consequences of thinning on fruit set, yield and fruit quality of `Rome Beauty' was studied. A full bloom application of hydrogen cyanamide at the rate of 0.25% (Dormex formulation) or 0.25% of Wilthin both followed by a fruit thinning by Sevin + NAA effectively thinned mature trees of `Rome Beauty' and had a similar effect on fruit set, yield and fruit quality. The effects of these two chemicals at these rates on several aspects of fruit set, yield and quality were similar to the effects of Elgetol. Hydrogen cyanamide, Elgetol and 0.25% Wilthin at full bloom resulted in a higher percentage of single fruit set, thus, less labor for hand thinning. Application of 0.37% Wilthin at 20% bloom or at full bloom resulted in larger fruit size, but induced fruit russetting. Soluble solids of fruit from trees with Elgetol, 0.37% Wilthin at 20% bloom or at full bloom were higher than fruit from other treatments. Hydrogen cyanamide at 0.50% resulted in a satisfactory level of blossom thinning in `Friar' plums.

Sign in / Sign up

Export Citation Format

Share Document