scholarly journals EFFECTS OF CHEMICAL THINNING WITH ARMOTHIN® ON FRUIT SET, YIELD AND QUALITY OF JAPANESE PLUM (Prunus salicina Lindl.) CV. ‘FORTUNE’

2019 ◽  
Vol 18 (3) ◽  
Author(s):  
Eduardo Von Bennewitz ◽  
Andrés Cabalín ◽  
Tomáš Lošák

The effects of the application of the chemical thinner Armothin® on fruit set, yield and quality of Japanese plum (Prunus salicina Lindl.) cv. ‘Fortune’ were studied during two seasons in Central Chile (34.56°S, 71.5°W). Trees were sprayed with Armothin® at 0.5%, 1% and 2% concentrations. All thinning treatments reduced the fruit set and fruitlet number (fruitlets/50 cm of branch). Armothin® at 2% conc. was the most aggressive treatment, drastically reducing the fruit set from 85.9% and 82.9% of the control and crop load to unprofitable levels during both seasons. Chemical thinning treatments at the two lowest concentrations (0.5 and 1%) did not significantly alter the crop load compared with the unsprayed control during both study seasons. Thinning costs were reduced (Armothin® 0.5%, 25.0% and 21.5% of the control treatment and Armothin® 1%, 24.6% and 24.1% of the control, during the first and second season, respectively). In general, chemical thinning increased the fruit size and total soluble solids content (TSS). Taking into account the ef- fects on thinning, crop load, fruit quality and thinning costs, Armothin® 1% and Armothin® 0.5% are the most advantageous treatments in the case of this study.

HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 455f-455
Author(s):  
Esmaeil Fallahi ◽  
Brenda R. Simons ◽  
Max W. Williams

Effects of hydrogen cyanamide and Wilthin on blossom thinning and the consequences of thinning on fruit set, yield and fruit quality of `Rome Beauty' was studied. A full bloom application of hydrogen cyanamide at the rate of 0.25% (Dormex formulation) or 0.25% of Wilthin both followed by a fruit thinning by Sevin + NAA effectively thinned mature trees of `Rome Beauty' and had a similar effect on fruit set, yield and fruit quality. The effects of these two chemicals at these rates on several aspects of fruit set, yield and quality were similar to the effects of Elgetol. Hydrogen cyanamide, Elgetol and 0.25% Wilthin at full bloom resulted in a higher percentage of single fruit set, thus, less labor for hand thinning. Application of 0.37% Wilthin at 20% bloom or at full bloom resulted in larger fruit size, but induced fruit russetting. Soluble solids of fruit from trees with Elgetol, 0.37% Wilthin at 20% bloom or at full bloom were higher than fruit from other treatments. Hydrogen cyanamide at 0.50% resulted in a satisfactory level of blossom thinning in `Friar' plums.


2017 ◽  
Vol 35 (2) ◽  
pp. 271-277
Author(s):  
Roberto CF Queiroga ◽  
Gabriel D Silva ◽  
Auderlan M Pereira ◽  
Ricardo RP Almeida ◽  
Ariano B Silva

ABSTRACT Squashes and pumpkins are known and grown worldwide, including the Tetsukabuto type, a hybrid of Japanese origin. On this work, we evaluated yield and quality of parthenocarpic fruits of hybrid Tetsukabuto developed with the use of 2,4-D doses, in the climatic conditions of the Brazilian semiarid, in the city of Pombal, state of Paraíba, Brazil. The experiment was carried out from February to May 2013, in complete blocks at random and five replications. Treatments corresponded to five 2,4-D doses (0, 90, 180, 270, and 360 mg/L) applied to female flowers, and a control treatment, where fruits developed out of insect pollinated flowers. We evaluated number of flowers per plant, duration of flowering, number of fruits per plant (used to estimate number of fruits per hectare), fruit set index, fruit mass and transversal and longitudinal diameters, pulp thickness and content of soluble solids, total fruit production and yield. Number of fruits per plant and fruit mass increased 269.5 and 15.4%, respectively, with 212.1 mg/L and 360.0 mg/L of 2,4-D, when compared to the control treatment. Increasing the 2,4-D dose from 0.0 to 241.4 mg/L resulted in 38.2% rise in plant production. Correlations were significant only for number of flowers x number of fruits per plant (NF) and NF x yield, with coefficients of 87.5 and 82.7%, respectively. These results indicate that fruit induction using 2,4-D resulted in higher fruit set, independent of the 2,4-D dose applied.


HortScience ◽  
1990 ◽  
Vol 25 (9) ◽  
pp. 1147c-1147
Author(s):  
J. Anthony Hopfinger ◽  
Donald W. Shaffner ◽  
Eric D. Cubberley

Both Cacl2 and Nutrical (a trihydroxyglutarate chelate) were foliarly applied at rates of 1.8 and 5.5 Cacl2/ha/season and 1.5 and 4.5 l/ha/season, respectively. Applications were made starting at shuck split and repeated at 2 week intervals until harvest. Neither calcium treatment had an effect on fruit size and size distribution. Fruit size was directly related to crop load. Calcium chloride application had the most pronounced effect on increasing the red over-color of `Cresthaven' peaches with Nutrical intermediate compared to the control. The high rate of Nutrical increased flesh calcium levels at harvest by 75-100 PPM. Instron Texture Profile Analysis indicated that any calcium treatment significantly increased the hardness of the peach. Nutrical at 4.5 l/ha/season improved hardness 2-fold compared to the controls. The improved hardness was maintained throughout the 6 week storage period.


2021 ◽  
pp. 203-213
Author(s):  
Rosemary J. du Preez

Abstract This chapter describes the guava fruit as well as the fruit set, growth, drop, harvesting, yield and quality (total soluble solids, total acids and ascorbic acid). Understanding the phenological cycle of guava and the effect of management practices on yield and fruit quality allows management practices to be modified to develop strategies which should lead to productivity gains for different pruning or chemical application times. As the effects of various treatments and times of application on yield and fruit quality for different cultivars and climatic zones are known, it is possible to decide on the optimum time to apply treatments knowing what the quality of the fruit will be, the time that the fruit will be harvested, expected yield and the critical times to apply management practices.


2012 ◽  
Vol 76 (1) ◽  
pp. 99-118 ◽  
Author(s):  
Fouad Mohamed ◽  
Khalid El-Hamed ◽  
Mohammed Elwan ◽  
Mennat-Allah Hussien

Impact of Grafting on Watermelon Growth, Fruit Yield and QualityGrafting is an alternative approach to reduce crop damage resulting from soil-borne pathogens and increases plant abiotic stress tolerance, which in turn increases crop production. The purpose of this study was to determine whether grafting could improve plant growth and fruit quality of watermelon through monitoring the changes induced by different rootstock-scion combinations. Watermelon (Citrullus lanatus) cv. Aswan F1was grafted into five rootstocks (Nun 6001 F1, Strongtosa F1, Tetsukabuto F1, Ferro F1and Shintoza F1) hybrids betweenCucurbita maximaandCucurbita moschata.Highest vegetative growth and fruit yield were obtained by ‘Nun 6001 F1’ as a rootstock using the tongue approach method. Grafting reduced significantly sex ratio by reducing the number of male flowers. Grafting increased significantly lycopene content in fruit flesh by 57% over the control treatment, but did not affect soluble solids content (SSC). One third of the control non-grafted plants died andFusarium oxysporumwas isolated as the responsible pathogen. These results indicate that grafting watermelon onto specific rootstock influences growth, productivity, and quality of the fruit as well as disease resistance. Grafting can be suggested as an alternative method to control ofFusariumwilt in watermelon production.


1979 ◽  
Vol 59 (4) ◽  
pp. 1085-1091 ◽  
Author(s):  
JOHN O’SULLIVAN

The effect of rate of N fertilizer and irrigation on yield and quality of peppers (Capsicum annum L.) was studied oyer a 5-yr period from 1974 to 1978 and data for 4 yr are presented. Irrigation significantly increased yield only in 2 yr (1974 and 1978) when rainfall was below normal. Yield differences due to irrigation were attributed to increased fruit numbers per plant (increased fruit set), increased fruit size, increased wall thickness and a reduced number of non-marketable fruit, due to a reduction in the incidence of sun scald and blossom-end rot. The response to N was variable. Rates of N greater than 70 kg/ha did not in general result in increased yields. Higher rates of N reduced yields in 1978, due to the adverse effect of high N on fruit set, resulting in reduced fruit numbers per plant. Rate of N had no effect on fruit size or wall thickness, but high N increased the incidence of blossom-end rot and delayed maturity in some seasons. The interaction between irrigation and N was not significant. Petiole NO3-N content at early fruit set reflected the rate of N applied. When the concentration of NO3-N in the tissue dropped below 0.4%, yields were significantly reduced.


2020 ◽  
Vol 23 (2) ◽  
pp. 218-227
Author(s):  
Zulaikha Ramadhan Ibrahim

This study was conducted at a private orchard in the Ekmale village of Duhok Governorate, Kurdistan Region, Iraq during growing season (2020) to evaluate the effect of foliar sprays of three concentrations of zinc (0, 750, and 1500 mg.L−1 ), three concentrations of copper (0, 100, and 200 mg.L−1 ) and three concentrations of iron (0, 150, and 300 mg.L−1 ) on leaf nutrient, fruit set, as well as yield and quality of 18- years old " Halebi " pistachio trees. The nutrition solutions were sprayed on trees at two times (bud swell stage and green tip stage). Based on the obtained results, fruit set percentage, yield, and leaf nutrient were significantly affected by foliar application of a zinc, copper and iron each alone. In combination, the triple interactions among 1500mg.L−1 zinc plus 200mg.L−1 copper and 300mg.L−1 iron was the most affected one which exceed significantly on the control treatment, Moreover, nutrient treatment had a significant effect on the percentage of blankness. In general, these results show that Zn, Cu and Fe fertilizers is necessary for obtaining better yield and fruit quality in " Halebi " pistachio trees.


2017 ◽  
Vol 2 (2) ◽  
pp. 19 ◽  
Author(s):  
Husain Ahmad ◽  
Muhammad Sajjid ◽  
Sikandar Hayat ◽  
Rizwan Ullah ◽  
Muhammad Ali ◽  
...  

<p><em>Strawberry fruit takes less time for production and is easily multiplied. Fruiting is an exhaustive process and depletes nutrients especially phosphorus as it is highly immobile in the soil. An experiment was conducted in The University of Peshawar, Pakistan to evaluate different level of Phosphorous on growth, yield and fruit quality of Strawberry Cv Chandler. Results show that Phosphorus at 90 kg ha<sup>-1</sup> significantly influenced the days to flowering (102.66) of strawberry plants while, at 80 kg ha<sup>-1</sup> significantly affected days to fruit set (2.98), days to fruit maturity (20.05), Number of fruits (7.50) and Total fruit yield tons ha<sup>-1</sup>(3.61). Fruit size (6.42 cm3) was significantly affected at 70 kg ha<sup>-1</sup>. Similarly, Ascorbic acid (62.61), percent acidity (0.64) and Total soluble solids (7.83) were significantly affected by phosphorus at 60 kg ha<sup>-1</sup></em></p>


2017 ◽  
Vol 9 (3) ◽  
pp. 1365-1368
Author(s):  
P. Nandi ◽  
D. Roy ◽  
B. Ghosh ◽  
S. Kundu

The study of the effect of bending of shoots in different months in guava cv. Khaja was carried out at Horticulture Research Station, Mondouri of Bidhan Chandra Krishi Viswavidyalaya to find out suitable bending time for improving flowering, yield and quality of guava. The experiment consists of seven treatments with three replications in a randomised block design. The different treatments were bending in October (T1), November (T2), March (T3), April (T4), May (T5), June (T6) and untreated control (T7). Bending in June (T6) resulted early emergency of new shootlet (15.0 days), flower initiation (40.33 days) and fruit set (48.33 days) from the date of bending as well as the same treatment showed maximum fruit weight (197.67 gm), fruit length (8.00 cm), fruit diameter (7.16 cm) and pulp thickness (2.20 cm). Higher fruit quality in terms of total soluble solids (11.04 0brix), total sugar (7.0 %) and ascorbic acid content (197.96 mg/100g pulp) was noted when bending was done in May (T5) and June (T6). Bending in the month of October (T1) resulted in maximum C: N ratio of leaf with maximum flowering shootlets in a branch and yield (63.67 kg/plant). So, time of bending may be standardized in the month of October or June for higher profit.


HortScience ◽  
2006 ◽  
Vol 41 (5) ◽  
pp. 1253-1258 ◽  
Author(s):  
Elina D. Coneva ◽  
John A. Cline

The purpose of this research was to determine the effectiveness of three blossom-thinning compounds on crop density and fruit quality of two peach cultivars. Treatments consisted of 15 ml·L–1 and 30 ml·L–1 ammonium thiosulphate, 30 ml·L–1 and 40 ml·L–1 decyl alcohol, and 40 ml·L–1 lime sulfur. Treatments were applied to `Redhaven' and `Harrow Diamond' peach trees at two phenological stages: 80%, and 100% full bloom in 2002 and 2003. In both years, treatments reduced the crop density in both cultivars, and in 2003 the amount of hand thinning required to adjust the crop load was significantly reduced. Fruit size from several blossom-thinned treatments was comparable with that observed from hand-thinned trees. However, treatments caused significant leaf phytotoxicity to `Harrow Diamond' trees in 2003, likely a result of hand spray gun applications. These data indicate that chemical sprays at bloom can be used successfully to reduce fruit set, but are very environmentally, dose, and cultivar dependent.


Sign in / Sign up

Export Citation Format

Share Document