Economics of integrated weed management in herbicide-resistant canola

Weed Science ◽  
2006 ◽  
Vol 54 (1) ◽  
pp. 138-147 ◽  
Author(s):  
Bharat M. Upadhyay ◽  
Elwin G. Smith ◽  
G. W. Clayton ◽  
K. N. Harker ◽  
R. E. Blackshaw

Integrated weed management (IWM) decision strategies in herbicide-resistant canola-production systems were assessed for net returns and relative risk. Data from two field experiments conducted during 1998 to 2000 at two locations in Alberta, Canada, were evaluated. A herbicide-based experiment included combinations of herbicide system (glufosinate-, glyphosate-, and imazethapyr-resistant canola varieties), herbicide rate (50 and 100% of recommended dose), and time of weed removal (two-, four-, and six-leaf stages of canola). A seed-based experiment included canola variety (hybrid and open-pollinated), seeding rate (100, 150, and 200 seeds m−2), and time of weed removal (two-, four-, and six-leaf stages of canola). For the herbicide-based experiment, strategies with glyphosate were profitable at Lacombe, but both imazethapyr and glyphosate strategies were profitable at Lethbridge. Weed control at the four-leaf stage was at least as profitable as the two-leaf stage at both sites. For the seed-based experiment, the hybrid was more profitable than the open-pollinated cultivar, seed rates of 100 and 150 seeds m−2were more profitable than 200 seeds m−2, and weed control at the two- and four-leaf stages was more profitable than at the six-leaf stage. When risk of returns and statistical significance was considered, several strategies were included in the risk-efficient set for risk-averse and risk-neutral attitudes at each location. However, the glyphosate-resistant cultivar, the 50% herbicide rate, and weed control at four-leaf stage were more frequent in the risk-efficient IWM strategy set. The open-pollinated cultivar, 200 seeds m−2rate, and weed control at the six-leaf stage were less frequent in the set. The risk-efficient sets of IWM strategies were consistent across a range of canola prices.

2004 ◽  
Vol 18 (4) ◽  
pp. 1006-1012 ◽  
Author(s):  
K. Neil Harker ◽  
George W. Clayton ◽  
John T. O'Donovan ◽  
Robert E. Blackshaw ◽  
F. Craig Stevenson

Herbicide-resistant canola dominates the canola market in Canada. A multiyear field experiment was conducted at three locations to investigate the effect of time of weed removal (two-, four-, or six-leaf canola) and herbicide rate (50 or 100% recommended) in three herbicide-resistant canola systems. Weeds were controlled in glufosinate-resistant canola (GLU) with glufosinate, in glyphosate-resistant canola (GLY) with glyphosate, and in imidazolinone-resistant canola (IMI) with a 50:50 mixture of imazamox and imazethapyr. Canola yields were similar among the three canola cultivar–herbicide systems. Yields were not influenced by 50 vs. 100% herbicide rates. Timing of weed removal had the greatest effect on canola yield, with weed removal at the four-leaf stage giving the highest yields in most cases. Percent dockage was often greater for GLU and IMI than for GLY. In comparison with the other treatments, dockage levels doubled for GLU after application at 50% herbicide rates. The consistency of monocot weed control was usually greater for GLY than for GLU or IMI systems. However, weed biomass data revealed no differences in dicot weed control consistency between IMI and GLY systems. Greater dockage and weed biomass variability after weed removal at the six-leaf stage or after low herbicide rates suggests higher weed seed production, which could constrain the adoption of integrated weed management practices in subsequent years.


2003 ◽  
Vol 83 (2) ◽  
pp. 433-440 ◽  
Author(s):  
K. N. Harker ◽  
G. W. Clayton ◽  
R. E. Blackshaw ◽  
J. T. O’Donovan ◽  
F. C. Stevenson

Implementing a favourable agronomic practice often enhances canola production. Combining several optimal practices may further increase production, and, given greater crop health and competitiveness, could also improve weed control. A field experiment was conducted at Lacombe and Lethbridge, Alberta, from 1998 to 2000, to determine the optimal combination of glufosinate-tolerant cultivar (hybrid InVigor 2153 or open-pollinated Exceed), crop seeding rate (100, 150, or 200 seeds m-2) and time of weed removal (two-, four-, or six-leaf stage of canola) for canola yield and weed suppression. At equal targeted seeding rates, the hybrid cultivar had greater seedling density (8 plants m-2 higher) and seed yield (22% higher) when compared with the open-pollinated cultivar. Combining the better cultivar with the highest seeding rate, and the earliest time of weed removal led to a 41% yield increase compared with the combination of the weaker cultivar, the lowest seeding rate and the latest time of weed removal. The same optimal factor levels also favoured higher levels of weed control and lower weed biomass variability. Managing these factors at optimal levels may help increase net returns, reduce herbicide dependence and favour the adoption of more integrated weed management systems. Key words: Crop health, direct seeding, glufosinate, integrated weed management, weed population variability


2005 ◽  
Vol 75 (4) ◽  
pp. 79-84 ◽  
Author(s):  
D. Shaner

Some of the first products of biotechnology to reach the marketplace have been herbicide-resistant crops. Industry sees the development of herbicide-resistant varieties as a way to increase the availability of proven herbicides for a broader range of crops. However, the development of herbicide- resistant crops requires special attention to potential environmental questions such as herbicide usage, selection of resistant weed biotypes and spread of resistance from the resistant crop to wild species. Industry is actively addressing these concerns during the process of development. Proper development and use of herbicide-resistant crops in integrated weed management programs will provide farmers with increased flexibility, efficiency, and decreased cost in their weed control practices without increasing the risk of herbicide-resistant weeds. Furthermore, herbicide-resistant crops should prove to be valuable tools in managing herbicide- resistant weeds.


2021 ◽  
Vol 32 (5) ◽  
pp. 203-207
Author(s):  
M. Alejandro Garcia ◽  
Lucia V. Meneses ◽  
Tiago Edu Kaspary

Uruguayan agriculture has undergone dramatic changes in the last 50 years driven by the adoption of new agricultural production systems that incorporate zero tillage and herbicide resistant crops. This has resulted in a shift in weed species frequencies and the dispersion of introduced herbicide resistant weed populations. Finally, integrated weed management tools are being developed by research and extension services to manage herbicide-resistant (HR) weeds better and to reduce environmental impact of herbicides.


Agronomy ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 99 ◽  
Author(s):  
Gulshan Mahajan ◽  
Lee Hickey ◽  
Bhagirath Singh Chauhan

Weed-competitive genotypes could be an important tool in integrated weed management (IWM) practices. However, weed competitiveness is often not considered a priority for breeding high-yielding cultivars. Weed-competitive ability is often evaluated based on weed-suppressive ability (WSA) and weed-tolerance ability (WTA) parameters; however, there is little information on these aspects for barley genotypes in Australia. In this study, the effects of weed interference on eight barley genotypes were assessed. Two years of field experiments were performed in a split-plot design with three replications. Yield loss due to weed interference ranged from 43% to 78%. The weed yield amongst genotypes varied from 0.5 to 1.7 Mg ha−1. Relative yield loss due to weed interference was negatively correlated with WTA and WSA. A negative correlation was also found between WSA and weed seed production (r = −0.72). Similarly, a negative correlation was found between WTA and barley yield in the weedy environment (r = −0.91). The results suggest that a high tillering ability and plant height are desirable attributes for weed competitiveness in the barley genotypes. These results also demonstrated that among the eight barley genotypes, Commander exhibited superior WSA and WTA parameters and therefore, could be used in both low- and high-production systems for weed management. Westminster had a superior WSA parameter. Therefore, it could be used for weed management in organic production systems. These results also implied that genotypic ranking on the basis of WSA and WTA could be used as an important tool in strengthening IWM programs for barley.


2004 ◽  
Vol 44 (10) ◽  
pp. 993 ◽  
Author(s):  
R. S. Llewellyn ◽  
R. K. Lindner ◽  
D. J. Pannell ◽  
S. B. Powles

Greater adoption of integrated weed management, to reduce herbicide reliance, is an objective of many research and extension programmes. In Australian grain-growing regions, integrated weed management is particularly important for the management of herbicide resistance in weeds. In this study, survey data from personal interviews with 132 Western Australian grain growers are used to characterise the use and perceptions of integrated weed management practices. The main objective was to identify opportunities for improved weed management decision making, through targeted research and extension. The extent to which integrated weed management practices are used on individual farms was measured. Perceptions of the efficacy and reliability of various weed management practices were elicited for control of annual ryegrass (Lolium rigidum Gaud.), along with perceptions of the economic value of integrated weed management practices relative to selective herbicides. All growers were shown to be using several integrated weed management practices, although the use of some practices was strongly associated with the presence of a herbicide-resistant weed population. In general, both users and non-users were found to have high levels of awareness of integrated weed management practices and their weed control efficacy. Herbicide-based practices were perceived to be the most cost-effective. Opportunities for greater adoption of integrated weed management practices, to conserve the existing herbicide resource, exist where practices can be shown to offer greater shorter-term economic value, not necessarily just in terms of weed control, but to the broader farming system.


Weed Science ◽  
2012 ◽  
Vol 60 (SP1) ◽  
pp. 31-62 ◽  
Author(s):  
Jason K. Norsworthy ◽  
Sarah M. Ward ◽  
David R. Shaw ◽  
Rick S. Llewellyn ◽  
Robert L. Nichols ◽  
...  

Herbicides are the foundation of weed control in commercial crop-production systems. However, herbicide-resistant (HR) weed populations are evolving rapidly as a natural response to selection pressure imposed by modern agricultural management activities. Mitigating the evolution of herbicide resistance depends on reducing selection through diversification of weed control techniques, minimizing the spread of resistance genes and genotypes via pollen or propagule dispersal, and eliminating additions of weed seed to the soil seedbank. Effective deployment of such a multifaceted approach will require shifting from the current concept of basing weed management on single-year economic thresholds.


Weed Science ◽  
2014 ◽  
Vol 62 (2) ◽  
pp. 350-359 ◽  
Author(s):  
Gulshan Mahajan ◽  
Vikas Poonia ◽  
Bhagirath S. Chauhan

Field experiments were conducted in Punjab, India, in 2011 and 2012 to study the integrated effect of planting pattern [uniform rows (20-cm spacing) and paired rows (15-, 25-, and 15-cm spacing)], cultivars (PR-115 and IET-21214), and weed control treatments (nontreated control, pendimethalin 750 g ai ha−1, bispyribac-sodium 25 g ai ha−1, and pendimethalin 750 g ha−1 followed by bispyribac-sodium 25 g ha−1) on weed suppression and rice grain yield in dry-seeded rice. In the nontreated control, IET-21214 had higher grain yield than PR-115 in both planting patterns. However, such differences were not observed within the herbicide treatment. IET-21214 in paired rows, even in nontreated control, provided grain yield (4.7 t ha−1) similar to that in uniform rows coupled with the sole application of pendimethalin (4.3 t ha−1) and bispyribac-sodium (5.0 t ha−1). In uniform rows, sequential application of pendimethalin (PRE) and bispyribac-sodium (POST) provided the highest grain yield among all the weed control treatments and this treatment produced grain yield of 5.9 and 6.1 t ha−1 for PR-115 and IET-21214, respectively. Similarly, in paired rows, PR-115 in paired rows treated with sequential application of pendimethalin and bispyribac-sodium had highest grain yield (6.1 t ha−1) among all the weed control treatments. However, IET-21214 with the sole application of bispyribac-sodium produced grain yield similar to the sequential application of pendimethalin and bispyribac-sodium. At 30 days after sowing, PR-115 in paired rows coupled with pendimethalin application accrued weed biomass (10.7 g m−2) similar to the sequential application of pendimethalin and bispyribac-sodium coupled with uniform rows (8.1 g m−2). Similarly, IET-21214 with bispyribac-sodium application provided weed control similar to the sequential application of pendimethalin and bispyribac-sodium. Our study implied that grain yield of some cultivars could be improved by exploring their competitiveness through paired-row planting patterns with less use of herbicides.


Weed Science ◽  
2017 ◽  
Vol 65 (4) ◽  
pp. 525-533 ◽  
Author(s):  
Collen Redlick ◽  
Hema S. N. Duddu ◽  
Lena D. Syrovy ◽  
Christian J. Willenborg ◽  
Eric N. Johnson ◽  
...  

Concern over the development of herbicide-resistant weeds has led to interest in integrated weed management systems that reduce selection pressure by utilizing mechanical and cultural weed control practices in addition to herbicides. Increasing crop seeding rate increases crop competitive ability and thus can enhance herbicide efficacy. However, it is unknown how increasing the seeding rate affects an herbicide’s efficacy. The objective of this study was to examine the interaction between increasing seeding rate and herbicide dose to control weeds. To meet this objective, the herbicide fluthiacet-methyl was applied to field-grown lentil, with Indian mustard, a proxy for wild mustard, used as a model weed. The experiment was a factorial design with four lentil seeding rates and seven herbicide rates. Overall the herbicide dose response was altered by changing lentil seeding rate. Increasing lentil seeding rate decreased the weed biomass production when herbicides were not applied. In two of the four site-years, increasing lentil seeding rate lowered the herbicide ED50, the dose required to result in a 50% reduction in weed biomass. Increasing the crop seeding rate altered the dose response to provide greater weed control at lower herbicide rates compared with normal crop seeding rates. Increased seeding rates also resulted in higher and more stable crop seed yields across a wider range of herbicide dosages. These results suggest that dose–response models can be used to evaluate the efficacy of other weed management practices that can interact with herbicide performance.


2011 ◽  
Vol 21 (5) ◽  
pp. 606-615 ◽  
Author(s):  
Megh Singh ◽  
Mayank Malik ◽  
Analiza H.M. Ramirez ◽  
Amit J. Jhala

Citrus (Citrus spp.) is one of the most important crops in Florida agriculture. Weed control is a major component in citrus production practices. If not controlled, weeds may compete with citrus trees for nutrients, water, and light and may also increase pest problems. Herbicides are an important component of integrated weed management program in citrus. Saflufenacil, a new herbicide registered for broadleaf weed control in citrus, can be applied alone or in a tank mix with other herbicides to improve weed control efficacy. A total of six field experiments were conducted in 2008 and 2009 to evaluate the efficacy of saflufenacil applied alone or in a tank mix with glyphosate and pendimethalin for weed control. In addition, experiments were also conducted to evaluate phytotoxicity of saflufenacil applied at different rates and time intervals in citrus. The results suggested that saflufenacil applied alone was usually effective for early season broadleaf weed control; however, weed control efficacy reduced beyond 30 days after treatment (DAT) compared with a tank mix of saflufenacil, glyphosate, and pendimethalin. For example, control of weeds was ≤70% when saflufenacil or glyphosate applied alone compared with tank mix treatments at 60 and 90 DAT. Addition of pendimethalin as a tank mix partner usually resulted in better residual weed control compared with a tank mix of saflufenacil and glyphosate, and this herbicide mixture was comparable with grower's adopted standard treatment of a tank mix of glyphosate, norflurazon, and diuron and several other tank mix treatments. Saflufenacil applied once in a season at different rates or even in sequential applications did not injure citrus trees when applied according to label directions. It is concluded that with its novel mode of action, saflufenacil tank mixed with glyphosate and pendimethalin would provide citrus growers with another chemical tool to control broadleaf and grass weeds.


Sign in / Sign up

Export Citation Format

Share Document