LIQUID FILM EVAPORATION INTO A GAS STREAM WITH COMBINED HEAT AND MASS TRANSFER ALONG A SATURATED POROUS LAYER WITHIN A VERTICAL FLOW CHANNEL

2008 ◽  
Author(s):  
M'barek Feddaoui ◽  
Saliha Senhaji ◽  
Touria Mediouni ◽  
Ahmed Mir
Keyword(s):  
Mass Transfer ◽  
Liquid Film ◽  
Heat And Mass Transfer ◽  
Porous Layer ◽  
Flow Channel ◽  
Vertical Flow ◽  
Film Evaporation ◽  
Saturated Porous Layer

scholarly journals Computational Study of Liquid Film Evaporation along a Wavy Wall of a Vertical Channel

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Monssif Najim ◽  
M’barek Feddaoui ◽  
Abderrahman Nait Alla ◽  
Adil Charef
Keyword(s):  
Mass Transfer ◽  
Liquid Film ◽  
Heat And Mass Transfer ◽  
Numerical Study ◽  
Computational Study ◽  
Vertical Channel ◽  
Wavy Wall ◽  
Gas Phases ◽  
Multiple Parameters ◽  
Film Evaporation

A numerical study of mixed convection heat and mass transfer along a vertical channel with a wavy wall is performed. The wavy wall is heated by a constant flux, while the other is adiabatic. The discretisation of equations in both liquid and gas phases is realised using an implicit finite difference scheme. Results of simulation compare the effect of multiple parameters, especially amplitude and characteristic length of the curve, on the liquid film evaporation process. The results indicate that heat and mass transfer is enhanced by increasing the amplitude and number of wall waves. Moreover, a very small value of waves amplitude of the wall may reduce the sensible heat and mass transfer.

Heat and Mass Transfer Characteristics of Evaporating Falling Films

2019 ◽  
pp. 251-276
Author(s):  
Monssif Najim ◽  
M'barek Feddaoui ◽  
Abderrahman Nait Alla ◽  
Adil Charef
Keyword(s):  
Mass Transfer ◽  
Liquid Film ◽  
Heat And Mass Transfer ◽  
Gas Flow ◽  
Thermal Protection ◽  
Liquid Films ◽  
Two Phase ◽  
Film Evaporation ◽  
Transfer Characteristics ◽  
Two Phases

This chapter presents a numerical investigation of heat and mass transfer characteristics during the evaporation of liquid films in vertical geometries. A two-phase model is developed to simulate laminar film evaporation into laminar gas flow. The liquid film evaporation is evaluated under adiabatic and heated wall conditions for both pure and binary liquid film. The model is based on a finite difference method to solve the governing equations of the two phases. The obtained results concerns two industrial processes. The first part of the chapter is devoted to the analysis of the thermal protection of vertical channel wall, while the second part is devoted to the desalination process by falling liquid film. The simulations results allowed the determination of the optimal operating conditions for both processes.

scholarly journals Numerical study of heat and mass transfer during evaporation of a thin liquid film

2015 ◽  
Vol 19 (5) ◽  
pp. 1805-1819 ◽  
Author(s):  
M’hand Oubella ◽  
M’barek Feddaoui ◽  
Rachid Mir
Keyword(s):  
Mass Transfer ◽  
Liquid Film ◽  
Heat And Mass Transfer ◽  
Numerical Study ◽  
Thin Liquid Film ◽  
Simple Algorithm ◽  
Liquid Films ◽  
Inlet Temperature ◽  
Transfer Rates ◽  
Film Evaporation

A numerical study of mixed convection heat and mass transfer with film evaporation in a vertical channel is developed. The emphasis is focused on the effects of vaporization of three different liquid films having widely different properties, along the isothermal and wetted walls on the heat and mass transfer rates in the channel. The induced laminar downward flow is a mixture of blowing dry air and vapour of water, methanol or acetone, assumed as ideal gases. A two-dimensional steady state and elliptical flow model, connected with variable thermo-physical properties, is used and the phase change problem is based on thin liquid film assumptions. The governing equations of the model are solved by a finite volume method and the velocity-pressure fields are linked by SIMPLE algorithm. The numerical results, including the velocity, temperature and concentration profiles, as well as axial variations of Nusselt numbers, Sherwood number and dimensionless film evaporation rate are presented for two values of inlet temperature and Reynolds number. It was found that lower the inlet temperature and Re, the higher the induced flows cooling with respect of most volatile film. The better mass transfer rates related with film evaporation are found for a system with low mass diffusion coefficient.

Sign in / Sign up

Export Citation Format

Share Document